Express delivery
Large selection of carriers
Satisfaction guarantee
Roket Hot is a thin, water-based cyanoacrylate adhesive, easy to penetrate into any joint, dries deep into the balsa and holds in seconds. The application can also be done by pressing the surfaces together and applying the adhesive around the perimeter to the joint. Beware of fumes that irritate the eyes and respiratory system. The best use is the Roket Hot when gluing balsa surfaces where it can penetrate the depth of wood. Therefore, glued joints hold very well. Another application is to reinforce bolt holes in wood or plywood - just drop a few drops of glue into the drilled hole. The glue is poured into the depth of the wood, thereby strengthening the area around the hole. The screws are then held much better in the wood and no cracking occurs.
The adhesive is fitted with an "Anti-Clog" applicator, which can be used to apply the exact amount of adhesive without excessive leakage and at the same time it does not stick. Teflon micro-applicators, pipettes and tubes are available for easier work, making the application of the adhesive easier and more accurate.
