Express delivery
Large selection of carriers
Satisfaction guarantee
Traxxas 4-Tec 2.0 VXL on-road RC chassis. Scale 1:10, all-wheel drive, powerful Velineon 550 brushless motor and VXL-3s controller, waterproof electronics. Basically up to 115 km / h. Compatible with standard on-road bodies.
The history of the classic (on-road) Traxxas models began with the Traxxas 4-Tec. It was a classic building - the axle drive was solved by straps, the model was then fitted with a DC motor and a resistor regulator - the speed of the motor was controlled by resistors, which were mechanically controlled by servo. And how else, the 27MHz RC kit ... Traxxas has decided to restore on-road RC car models in its portfolio, taking advantage of the extensive experience of the previous 4-Tec 1.0 chassis.
The Traxxas 4-Tec 2.0 chassis is a three- dimensional composite molding (glass-fiber-filled nylon) that is lightweight and tough. Everything was subordinated to obtain the lowest possible center of gravity. The axle drive is no longer solved by problematic straps, but by the central shaft - similar to the Slash 4x4 models. The model comes with a Titan 12T DC motor and XL-5 controller. Motor and controller mounts allow the use of brushless motors such as Castle Creations.
To simplify maintenance, the chassis is modular. Easily separate the front center and rear of the model.
Traxxas remembered that each body has specific shapes and hence other places for optimal attachment. That's why the Traxxas 4-Tec 2.0 is on the chassis Adjustable body holders are used so you can fasten your body at the most convenient location.
Placing an on-road body such as from Killerbody will be no problem!
Traxxas remembered those who like to drift. For drifting it is important that the front wheel cornering is as large as possible. Therefore, the suspension of the 4-Tec 2.0 front wheels is so conceived and the simple adjustment can increase the corner angle up to ?? ° .
Furthermore, the limiting vertical movement of the arms. The M4 (Order No. TRA4897) screwed into the arm reduces the vertical movement of the arm. This allows you to drive faster through turns and improve drifting performance.
Do you use 23 mm NiMH batteries and 25 mm LiPo batteries? No problem for TRX chassis. Simply rotating the bracket ensures that the battery is 23 mm or 25 mm high. In addition, the battery holder does not fasten with a clip, but with a plastic clip from the side.
The Velineon 550 brushless motor is precisely tuned for use in 1:10 RC cars. Car models provide the perfect balance between performance and optimum efficiency. Another advantage is the long life, which is determined only by ball bearings. Bearings can be purchased from the service kit under order number TRA3352R.
The 550 Series engine has a 4-pole design that provides up to twice the torque over a two-pole version. The rotor is dynamically balanced and embedded with Kevlar fabric to increase strength / p>
Three-mode Traxxas VXL-3S Waterproof Electronic Controller with advanced high-capacity LiPo batteries and EZ-Set ™ easy operation. The VXL-3S is equipped with a training mode that limits full throttle to 50%. This allows novice drivers or children to gradually learn about the features of the model and prepare for the full power of the car. Thermal protection, gold-plated connectors, simple operation and intuitive signaling with two-color LED.
The Traxxas Stability Management (TSM) stabilization system allows you to experience not only power, speed, acceleration and cornering at extreme speeds, but also much easier steering and control on slippery surfaces such as dust, smooth concrete or even ice and snow.
The receiver has a MEMS 3-axis gyro and an accelerometer that evaluates 100x per second of model movement and corrects the direction of the model by appropriate interventions to control the front wheels. Traxxas TSM does not limit engine power - you have 100% control over engine power. Algorithms are tuned for each model separately. The assistance rate is set using the multifunction knob on the transmitter or Traxxas Link.
Traxxas has prepared for you a completely new line of two-channel RC sets with Bluetooth connectivity for RC car models. Originally it was possible to equip the RC transmitters with a docking station for Apple devices. Traxxas continues to develop and has prepared for you an RC transmitter with a wireless Bluetooth module slot. This allows you to wirelessly connect any device with Bluetooth LE interface and Apple iOS (iPhone, iPod, iPad, ...) or Google Android (Samsung Galaxy ...) to your transmitter. The Traxxas Link app for Apple devices is available for free at AppStore , the Google Android app is free on GooglePlay .
Traxxas Link App is a powerful application that gives you total control over the operation and tuning of the Traxxas RC model with stunning visualization and absolute setup accuracy. Traxxas Link displays real-time telemetry data, measures speed, speed, temperature, and battery voltage. You can share RC model settings, you can create any number of profiles for a particular track or user, such as children. Everything in the application with brilliant graphics, which is a matter of course from Traxxas.
