Traxxas Slash 1:10 BL-2s RTR Green

The Traxxas Slash is a powerful 1:10 RC car model with 2WD drive and a speed of up to 56 km/h. It is fully assembled and includes a clipless body . It is powered by a powerful AC motor with a BL-2S regulator . Traxxas T

TRA58134-4-GRN

New product

TRAXXAS

In stock: 3 pcs
Stores and delivery dates
Price with VAT:
(DPH CZ 21%)
287,66 € 267,52 €
Price without VAT
221,09 €

-20,14 €

B B

More info

Recommended accessories

Spare parts

Tuning parts

Telemetry

Wheels

More info


Package contents


The package includes a fully assembled Traxxas Slash 1:10 2BL RTR RC car model with installed components: 3300rpm AC motor, BL-2S AC controller, Traxxas 2075 servo, 2.4GHz 3-channel receiver. TQ. Traxxas transmitter 2.4GHz 2 channels. TQ. Accessories: Allen key (1.5, 2, 2.5 mm), connector key, pin key, cross key, antenna key, battery spacer, pistons and spring washers. Instructions CZ, manual EN, DE, FR, SP.


Characteristics


The Traxxas Slash is a powerful 1:10 scale RC model car with 2WD and a speed of up to 30 mph. It is fully assembled and ready to ride. It is powered by a powerful AC motor with a BL-2S regulator . The simple Traxxas TQ 2.4 GHz RC kit provides precise mechanics for precise control. Newly, the model uses a clipless body attachment system for easy battery replacement.




TRA58134-4_3.jpg


The affordable BL-2S AC drive included in the model includes all the advantages of brushless motors such as higher power, long life and minimal maintenance. The model has a carefully tuned chassis with independent suspension, thanks to which it can easily cope with various surfaces such as asphalt, low grass and more demanding terrain. For riding in a wet environment, the model has waterproof* electronics.








68277-4-Slash-4X4-Ultimate-Clipless-400w
Clipless bodywork

The unique system of fastening the body with the help of beaks in the wheel arches, allows quick battery replacement and the clean appearance of the model is not disturbed by the clips.





TRA58134-4_30.jpg
Chassis

The rigidity of the chassis is ensured by the proven construction of fiber-filled nylon. Thanks to this, the model is light, excellently manoeuvrable and at the same time resistant to impact.





TRA67076-4_31.jpg
Oil dampers

High-lift oil shocks use dual X-rings for perfect sealing and perfect running. Robust design combined with high oil volume can absorb even hard impacts in difficult terrain. You can tune the dampers to your liking by adjusting the springs and changing the viscosity of the oil.





magnum-272.jpg
Gearbox, adjustable disc clutch and planetary differential

The gearbox, disc clutch and planetary differential are enclosed in one compact unit. A friction clutch transmission reliably transmits engine power to the axles, the Magnum 272™ planetary differential has gears made of hardened steel. This system requires absolutely minimal maintenance. There are pinions and sprockets with different numbers of teeth, so you can fine-tune the model for speed and technical tracks.





TRA58094_b_spojka.jpg
Friction clutch

The Revo Spec Torque Control friction clutch ensures smooth power transmission and is adjustable. A properly set amount of slip protects the drive train, while not reducing the acceleration of the model.





2075_waterproof_digital_servo.jpg
Servo steering

Digital Traxxas servo 2075 high-torque waterproof with DC motor and nylon gears has a torque of 9.0 kg.cm and a speed of 0.17 s/60°@ 6.0 V. For water resistance*, the servo box and the output 1000 edges are fitted with seals. Two ball bearings provide very smooth operation.





3384-BL-2S-3300-Motor-3.jpg
AC motor 3300kv

The Traxxas 3300kv AC motor provides the ideal affordable drive for 1:10 models with all the benefits of high performance, long life and minimal maintenance. The motor is equipped with a Quick Connect connector for easy connection. Other features include:




  • Integrated cooling fan
  • High speed ball bearings
  • High acceleration
  • Efficient operation for longer driving time





3383-BL-2S_ESC.jpg
Electronic regulator BL-2S

Waterproof* electronic BL-2S AC controller with three driving modes, 2S LiPo battery support and easy EZ-Set™ button control. The regulator is equipped with a training mode that limits full throttle to 50%. Thanks to this, novice drivers or children can gradually familiarize themselves with the features of the model and prepare for the full power of the car. Thermal protection, protection against underdischarge of LiPo batteries, gold-plated connectors, simple operation, intuitive signaling with a two-color LED diode and a powerful cooler that can be supplemented with an optional fan (not included in the package).



BL-2S controller modes


  • Sport : Default mode, forward, braking and reverse are possible.
  • Race : Mode suitable for racing. Forward and brake is possible; reverse is not available.
  • Training : Mode suitable for children or novice riders. It is possible to drive forward with a power limitation of 50%, brake and drive backwards again with a power limitation of 50%.




6516-TQ.jpg
Traxxas TQ RC Kit

The model is controlled by a two-channel proportional steering wheel RC radio Traxxas TQ, working in the 2.4 GHz band - operation without interference. The transmitter is powered by only 4 AA cells.



There is a rotary knob on the transmitter that trims the wheel steering (to make the model go straight if the steering wheel is in the center position). The status of the batteries in the transmitter is indicated by an LED. On the transmitter, reverse can be set on the gas channel and steering..





TRA6519.jpg
TQ receiver

The Traxxas TQ 2.4 GHz three-channel receiver ensures safe driving without interruptions. Easy pairing with one button. Status indication by means of an LED diode.




Properties


  • Complete assembled model in 1:10 scale
  • Clipless system for fixing the bodywork
  • 3300Kv AC motor with integrated cooling and Quick Connect connector
  • BL-2S AC controller with three driving modes
  • Waterproof* servo 2075 High Torque
  • Magnum 272 transmission with hardened steel gears
  • Revo Spec Torque-Control™ friction clutch
  • Telescopic shafts with joints
  • Finished painted bodywork
  • Oil dampers
  • Traxxas TQ 2.4 GHz RC Kit
  • The model is ready for an upgrade to AC drive


* Refer to the user manual for information on the water resistance specification. You can find tips and tricks for wet driving in the blog.




TRA58134-4_8.jpg

We recommend to buy


To operate the model, you need 4x AA batteries for the transmitter, a drive battery and a charger for the drive battery.




battery.jpg
Recommended LiPo batteries:

With modern LiPo batteries, the RC model will have high performance and drive for the maximum possible time. The model can be operated on a 2-cell (7.4 V) LiPo battery.




  • For higher performance Traxxas LiPo battery 7.4 V 5000 mAh
  • For higher performance and long driving time Traxxas LiPo battery 7.4 V 5800 mAh
  • For higher performance and extra long driving time Traxxas LiPo battery 7.4 V 7600 mAh


Recommended NiMH batteries:

NiMH batteries do not require precise handling and are therefore suitable if the RC model car is operated by children (NiMH batteries are not destroyed by complete discharge). However, NiMH batteries do not provide such performance.




  • Traxxas NiMH battery 8.4 V 3000 mAh (high)
  • For longer driving time Traxxas NiMH battery 8.4 V 5000 mAh (high)
  • NiMH battery Traxxas 8.4 V 3000 mAh (flat)
  • For longer driving time Traxxas NiMH battery 8.4 V 5000 mAh (flat)




charger.jpg
Recommended Traxxas Chargers

Traxxas universal chargers can charge Traxxas LiPo and NiMH batteries. (The charger included in the package is intended only for the NiMH type battery that is included in the package.) Traxxas chargers are a simple and safe way to charge batteries. Traxxas uses the unique iD system , so you're always sure to connect everything easily and safely. There is an integrated chip in the battery connector, which the Traxxas charger automatically recognizes and sets all battery charging parameters for you. More information here.


Universal chargers for batteries up to 3S LiPo and NiMH



  • Traxxas EZ-Peak 50W Single Output Mains Charger
  • Traxxas EZ-Peak 2x50W mains charger with 2 outputs






58034-61-Slash-Front-RED.jpg
LED lighting

Equip the model with a complete set of LED lighting for a breathtaking ride day and night. Thanks to this lighting, your model will become a real gem. High-luminosity diodes are not only effective, but also provide a strong stream of light. At the same time, the lighting provides a better overview of the model's position.




Other accessories


tra_bat_tas.jpg
Carrying bag and backpack

Carry the RC model comfortably and safely in a Traxxas sports bag or backpack. In addition to the main large pocket for the model, there are specially designed side pockets for batteries, charger, tools, etc.





TRA_stoj_vel.jpg
Stand

The aluminum swivel stand will be the perfect addition to your service table or display shelf. The stand facilitates the maintenance of the model and at the same time prevents the deformation (stretching) of the tires during long-term standing.





TRA_podlozka.jpg
Work mat

Work mat 91x51cm, for service of RC models and other modeling work. Prevents damage to the workbench, resistant to chemicals. Practical compartments for organizing parts and tools.





tools.jpg
Accessories for normal operation

For normal operation of the Traxxas RC car, you need bolt glue, good quality tire glue, silicone shock oil and a set of screwdrivers. We recommend an affordable set of tools for cars from our range.



The thread or head of the screw is dripped with screw glue, which fixes it and the vibrations caused by driving will not allow the screw connection to loosen. The screw adhesive has a special composition that allows the screw connection to be easily loosened with an adequate torque without damaging the screw head. Never use ordinary instant glue, it might be impossible to loosen a screw stuck like this!



Tire glue is used to glue the tires to the disc rim. It is always necessary that the tire is firmly stuck to the wheel rim all the way around! If the tire is not glued all the way around, it may tear. Tire glue has a special composition that is able to glue materials such as rubber or nylon, and at the same time, after hardening, the glue is flexible. Never use ordinary instant glue - it is not flexible after hardening and cracks would gradually form in the tire around the rims!



Sometimes it is necessary to add silicone oil to the dampers of the model. During normal operation, there are only slight leaks of silicone oil on the piston rods of the shock absorber. In the event that the surface of the damper pistons or the condition of the seals is in poor condition, the oil leakage may be large. For these cases, so-called repair kits are supplied. In the range of tuning parts, piston rods with an extremely hard TiN (titanium nitride) coating are delivered to all shock absorbers. Piston rods with a TiN surface are easily recognized by their golden-green color.


Recommended accessories

Spare parts

Tuning parts

Telemetry

Wheels