Express delivery
Large selection of carriers
Satisfaction guarantee
Laser-made wooden parts of the Primo Q aircraft model, 1: 1 plan, detailed construction instructions with step-by-step pictures.
Kit of the RC model of the motorized Primo Q glider with a span of 1.67 m in spreading. The light training model made of balsa and plywood is built according to the plan in a 1: 1 scale. The model is designed to be driven by an electric motor with front mounting. Discover the world of model design and build an airplane with your own hands.
RC model Primo Q is a kit of a training all-wood motorized glider, which is designed for piloting training. It allows flying with ailerons, thanks to which it is easy to control and in the hands of a more experienced pilot you can enjoy a lot of fun with the model. The rudder, elevator, ailerons and engine are controlled. An intuitive image manual guides you through building the model and installing the electronics.
In the kit you will find finished wooden components, such as ribs, beams, partitions, moldings and the like. These are gradually glued according to the instructions with a suitable wood adhesive (eg dispersion or Epoxy strength assemblies). The work goes quickly by hand, because the individual components are already ready and it is enough to gradually glue them into individual units according to the plan and the picture manual.
The assembly of the engine is perfectly solved, the bed with the installed engine holds two screws in the fuselage. Not only does this facilitate the installation of the engine, but also its eventual service. The battery is stored under the removable cover.
The wing halves slide onto the wing coupling onto the center section and onto the positioning pins. The unit is attached to the fuselage with one screw and in front to two pins in the fuselage.
It is a classic all-wood kit. To assemble the model, you need suitable adhesives, basic modeling tools and coating foil. We recommend using an iron-on foil to coat the model. There is no electronics in the package, so you need to buy an AC motor, propeller, regulator, battery and 4 mini servos and a 4+ channel RC kit.
The construction of wooden aircraft models is a traditional and the oldest technology used in their production. Wood is an affordable and inexpensive material, it is flexible, light and extremely durable. The structure can be repaired in case of damage. Beam slats are used as the material, most often spruce, pine, the basic building material is balsa and various types of plywood. Beech, ash or blocks of arms, linden, etc. can be used for strength parts.
The plan is placed on a flat wooden worktop made of soft wood (lath), on the plan it is necessary to place a transparent foil that will protect the plan from adhesives. For gluing, we use model pins KR-490050 which fix the components in the exact position. Conventional gluing of wooden parts is glued with dispersion glue FS-G09 / 250 or DM-AD10, which have the advantage of slow drying, so there is enough time to assemble the structure. The glued structure can be removed the next day after gluing.
During construction, there are several structural units that need to be glued with adhesives that resist higher stress, are resistant to chemicals, water, etc. The best known are 2-component Epoxy adhesives, supplied in a smaller package DM-AD67, in a larger package DM-AD68 and for extra high strength DM-AD19.
When working, it is sometimes necessary to use fast and firm bonding of components, for which second cyanoacrylate adhesives are excellent.
Our hands are not enough everywhere and when assembling a large number of parts separately, therefore various types of clamps are a welcome helper. Model mini stiffeners SH-PCL3050, parallel clamps SH-PCL4201 / A, classic clamps SH-PCL3000 or flexible clamps SH-PCL8710 / 2
When working with different materials, you need knives, saws, scissors and a lot of other tools. We can recommend break-off knives SH-PKN1003, set of knives SH-PKN3305 / S, model saws fine SH-PSA35 / 300 or larger SH-SA35 / 380, special straight scissors NA3528 or curved scissors NA3527
For precise cutting, gluing of parts and also as protection of the table, we recommend the modeling pad SH-PKN6003 and the safety ruler SH-RU1774.
The fastest and most effective surface treatment of wooden models is the coating with iron-on foil. IronOnFilm Not only is it possible to choose from a whole range of color shades, but it also solves the carcass resistance to weathering, color and shape stability, easy repairability and speed when completing the model. To work, you need a model iron, a sharp model knife and scissors.
