FLYFUN-160A-HV-OPTO-V5

New generation of brushless, sensorless programmable microprocessor controllers for large and giant recreational and sporting aircraft models powered by Li-poly / Li-ion / Li-Fe accumulators. Compared with previous generations of FLYFUN controllers, programming capabilities have been expanded with a number of features that have proven themselves in the Platinum range of top level controllers. The design of the controller takes into account the high durability and durability required in the giant models. The power part of the controller is galvanically isolated from the control electronics to ensure high interference resistance at high operating currents and high supply voltages. The controller is not equipped with a power stabilizer for the receiver and servos. The special Hobbywing LED programming box, which is supplied separately, is easy to set up.

DESCRIPTION AND FUNCTION OF THE REGULATOR

• Controller equipped with a high-performance 32-bit ARM M4 microprocessor with a clock frequency of up to 72 MHz; is compatible with most AC motors.
• Suitable for the vast majority of AC motors powered by 6-14S LiPo / Li-ion / LiFe accumulators.
• Special microprocessor power stabilizer for high immunity to noise and control loss.
• Optimized driving technology DEO (Driving Efficiency Optimization) greatly improves gas response and efficiency of power stage control, reducing controller temperature.
• Galvanically separated power section with an optoelectronic member.
• The Normal / Soft / Very Soft start modes are suitable for normal propeller and bladed models.
• Simple programming and setup with Hobbywing transmitter or LED programming box.
• A special programming cable for connecting the controller to the LED programming box allows the user to program the controller anytime, anywhere (for details, see the Hobbywing LED programming manual). <" / li>
• A range of protection functions: start protection, thermal protection of the controller, thermal protection of capacitors, overload protection, overcurrent protection, protection against abnormal supply voltage and loss of control signal effectively extend the life of the controller.
• Gas range calibration for perfect adjustment of the control signal from your RC kit.

PROGRAMMABLE FUNCTIONS

• Type of brake: Brake off, normal brake (with braking intensity adjustable in 7 levels), proportional brake (control with throttle: 0-20% throttle deflection corresponds to 100-0% of brake, 20-100% driver deflection corresponds to 0-100 % gas).
• Brake force: Brake force is adjustable from Level 1 to Level 7 for "Normal Brake" mode.
• Motor disconnection mode: Soft shutdown: The controller gradually reduces power to 50% of full power within 3 seconds of activation of the voltage protection. Hard Shutdown: The engine is immediately shut down.
• Number of LiPo cells: We recommend manual setting for 100% reliable operation of voltage protection. The controller automatically calculates the number of cells connected to the battery according to the "3.7V per cell" rule if you select automatic detection.
• Voltage protection: The threshold voltage level is adjustable between 2.8-3.8 V / cell; protection can also be completely disabled.
• Start-up: Normal start-up, Soft start (slow start for engines with large propellers, transmission or smaller blowers), Very soft start (with very slow start for engines with large propellers, gearbox or 90 mm blowers).
• Timing: Adjustable in the range of 0-30 °.
• Direction of rotation: Clockwise / counterclockwise.
• DEO Freewheel: This feature can be turned on or off; it can bring better linearity or smoother gas response.

Tip: When calibrating the controller for the first time, first calibrate the gas range as instructed." It is only then that the controller can be used and other parameters can be set using the transmitter or LED of the programming card.