KAVAN Brushless engine C3548-800
Express delivery
Large selection of carriers
Satisfaction guarantee
KAVAN C motors are powerful brushless fourteen-pole electric motors with a rotating casing ("outrunner") with excellent electrical properties, sophisticated construction and excellent production processing. They represent a very good choice for driving your recreational sports models with excellent performance parameters, good efficiency and a favorable price. They are low-speed, high-torque engines that can handle large-diameter propellers and climb without the need for a gearbox.
Engine identification system: CxxYY-zzzz |
C - AC motor with rotating casing ("outrunner", "orbit") |
xx - motor diameter in mm |
YY - motor length in mm |
zzzz - number of revolutions per volt (rpm on V), "KV" |
KAVAN C3548-800 is an AC motor designed to drive models with a flight weight of up to 2700 g and powered by a three- to five-cell Li-poly battery. Great for models such as EPP "Warbirds" and acrobatic models with a range of 1300-1400 mm, Spitfire EP or Mustang EP from Phoenix, etc.
Engine mounting: KAVAN C3548-800 is designed for front and rear mounting. When front mounting behind the front of the engine, use four M3 bolts that extend into the front of the engine by 4-5 mm. The pairs of holes for the fastening screws at the front of the engine are regularly spaced 180 ° on circles with a diameter of 25 and 19 mm. The engine bulkhead should be made of 5 mm plywood. The rear mounting kit (mounting cross, propeller carrier for rear assembly) is supplied with the engine.
Engine set includes: C3548-800 motor with cables with soldered 3.5 mm gold-plated connectors, rear mounting kit, instructions.
Power supply for LiXX cells | 3 - 5 |
Volt Speed [rpm/ min / V] | 800 |
Max. power (30 s / 5S LiPo) [W] | 660 |
No-load current (3S) [A] | 2.2 |
Max. peak current (30 s) [A] | 48 |
Diameter [mm] | 35 |
Length [mm] | 48 |
Shaft diameter [mm] | 4 |
Weight [g] | 170 |
Number of poles | 14 |
Timing [°] | 15 - 25 |
Regulator [A] | 50 - 60 |
Glider up to weight [g] | 2700 |
Trainer up to weight [g] | 2600 |
Acrobat up to weight [g] | 2300 |
3D to weight [g] | 1500 |
Recommended propeller | 3S: 14-7 ” |
4S: 13x6-8 ” |