Express delivery
Large selection of carriers
Satisfaction guarantee
Top thin seconds (cyanoacrylate) glue with high strength for modeling and general use specially optimized for gluing RC car tires . It comes in a bottle with a clog-resistant applicator. The 50g package is particularly convenient for racing pilots with a high consumption of glue.
The thin instant glue with low viscosity is ideal for gluing non-absorbent and absorbent materials that adhere perfectly to each other - a typical use is, for example, gluing RC car tires to rims. Glues wood, most plastics, metals, rubber, glass, ceramics, cork, paper.
Typical method of application: The glue is applied to the joint of perfectly aligned parts attached to each other. The low viscosity of the glue guarantees perfect penetration into the depth of the joint.
Properties
Color: clear
Viscosity: 2–10 mPa·s
Density: 1.04-1.06 g/cm3
Optimum temperature for application: 25 °C
Curing time (depends on temperature and nature of bonded materials): e.g. nitrile rubber <3 s, stainless steel 10–15 s
Full curing: 24 h
Shear strength: 15-25 N/mm2
Operating temperature range: -10 to +40°C
Max. temperature range: -40 to 85°C
Optimal gap width between glued parts: zero
Cured glue is soluble in: acetone, dimethylformamide, acetonitrile
Recommended activator: KAV56.9977 KAVAN PRO activator CA spray 150ml, KAV56.9958 KAVAN Activator CA spray 150ml, KAV56.9959 KAVAN Activator CA spray 200ml
Recommended peeler/debonder: KAV56.9979 KAVAN peeler CA 20g
Removing excess uncured glue: a cloth or paper towel moistened with acetone (if the glued materials can withstand it).
Thinning the glue: If the instant glue thickens, it is a sign that it has already partially polymerized and is losing its original properties - no amount of "thinning" can bring them back. If you need a "thinner" super glue, just use a lower viscosity type. Individual types of KAVAN PRO instant glues can be mixed together to achieve optimal viscosity.
Use as sealant, suitable fillers: microballoon filler KAV56.9980 CA KAVAN filler.
Suitable for bonding: RC car tires, soft and hard wood, chipboard, plywood, metals, ceramics, porcelain, glass and carbon laminates, glass and carbon fabrics and fibers, many plastics (including EPP and EPO).
Not suitable for gluing: polystyrene foam, polyethylene, Teflon, silicone.
Storage: in tightly closed packaging, in a cool, dry and dark place (at a temperature of +2 to +10 °C). Do not expose to temperatures below +2 °C.
Durability: If the conditions of proper storage are observed, we guarantee durability in unopened original packaging for a period of 1 year while maintaining the above-mentioned product properties.
