SUREFIX Secondary Glue is a one-component cyanoacrylate adhesive of thin, medium and thick viscosity. The SUREFIX adhesive is designed to be used in industry and strongly combines a wide range of porous and non-porous materials.
PROPERTIES - Liquid glue
- Density - sparse
- Basic component - ethyl
- Viscosity of cPs at 25 ° C - 3
- Appearance - clear
- Filling of hole in mm - 0,05
- Use -55 to 80 ° C
- Tensile strength N / mm2 - 15-26
- Melting point - 160-170 ° C
- Full cure - 24hrs
TYPICAL APPLICATIONS SUREFIX Secondary Adhesive is the ideal adhesive for bonding plastics, rubber, metal, wood, ceramics, leather, fabrics, cardboard and paper. The fixation is usually 5-30 seconds. In average, 50% of the joint strength is achieved during 12 to 24 hours increases to 15-26 N / mm2 (tensile strength).
INSTRUCTIONS FOR USE - Ensure that all bonded surfaces are clean and dry and are tight against each other.
- Apply the minimum amount of SUREFIX second adhesive to one of the glued surfaces.
- Push the parts instantly together and hold down compressed, usually for 15 to 60 seconds, before a solid joint is formed.
- Leave at rest for 5 minutes or the next day to create a bond with sufficient strength.
- Make sure there is no contact with the skin.
- Avoid environmental contamination and protect clothing and work surfaces. Remove the hardened adhesive residues using the DEBONDER SUREFIX Adhesive Remover.
- For best results, bonding should be done at room temperature (15-30 ° C) and at least 30% relative humidity.
- The SUREFIX Accelerator can be used to accelerate cure.
Limitations - Only for indoor use"
/ li>
- DO NOT USE ON SUSPENDED, SPINY OR WET SURFACES.
- Best results are achieved by gluing smooth, tightly fitting surfaces without any gaps.
- Not suitable for bonding polypropylene, polyethylene, PTFE, silicone rubber.
- Never use adhesive components used for storing hot liquids.
STORAGE For most adhesives, the storage time is one year if we comply with certain conditions, ie store vials in the vertical position, not opened in a dry and dark place. The temperature should be less than 20 ° C. Extend the storage time by lowering the temperature to 1 ° C. Allow the glue to warm to ambient temperature before use.
WARNING The properties given in this data sheet are average for the product and should not be used to create the specification. The data contained herein are of an informational nature only and are believed to be reliable. We can not take responsibility for the consequences of use beyond our control. It is solely the responsibility of the user to determine the suitability of any of the methods herein for its intended purpose and to take appropriate measures to protect the property and health of persons against any risks arising from handling and use. We recommend that every potential customer try out their applications before reuse, and they can be guided by the data.
The product contains substances classified as dangerous according to Regulation (EC) No 1272/2008. See the "Download" section for details.
"
