KAVAN PRO thick instant glue 20g

High-strength, high-strength instant (cyanoacrylate) glue for modeling and general use. It comes in a bottle with a clog-resistant applicator.

Thick instant glue with high viscosity is ideal for bonding absorbent and non-absorbent materials that adhere well to each other. Glues wood, most plastics, metals, rubber, glass, ceramics, cork, paper.

Typical method of application: glue is applied to one of the contact surfaces and the parts are immediately put together; for a short time some adjustment of the relative position is possible before the glue hardens.

Properties

• Color: clear
• Viscosity: 800-1200 mPa.s
• Density: 1.04-1.06 g/cm3
• Optimum temperature for application: 23 °C
• Curing time (depends on temperature and nature of bonded materials): e.g. nitrile rubber 4–7 s, stainless steel 15–25 s
• Full curing: 24 h
• Shear strength: 15-25 N/mm2
• Operating temperature range: -10 °C to +40 °C
• Max. temperature range: -40 °C to 85 °C
• Optimal gap width between glued parts: zero
• Cured glue is soluble in: acetone, dimethylformamide, acetonitrile

Recommended activator: KAV9977 KAVAN PRO activator CA spray 150ml

Recommended peeler/debonder: KAV9979 KAVAN peeler CA 20g

Removing excess uncured glue: a cloth or paper towel moistened with acetone (if the glued materials can withstand it).

Thinning the glue: if the instant glue thickens, it is a sign that it has already partially polymerized and is losing its original properties - no amount of "thinning" can bring them back. If you need a "thinner" super glue, just use a lower viscosity type. Individual types of KAVAN PRO instant glues can be mixed together to achieve optimal viscosity.

Use as sealant, suitable fillers: microballoon filler KAV9980 CA KAVAN filler.

Suitable for bonding: soft and hard wood, chipboard, plywood, metals, ceramics, porcelain, glass and carbon laminates, glass and carbon fabrics and fibers, many plastics (including EPP and EPO).

Not suitable for gluing: polystyrene foam, polyethylene, Teflon, silicone.

Storage: in tightly closed packaging, in a cool, dry and dark place (at a temperature of +2 °C to +10 °C). Do not expose to temperatures below +2 °C.

Durability: if the conditions of proper storage are observed, we guarantee durability in unopened original packaging for a period of 1 year while maintaining the above-mentioned product properties.

The product contains substances classified as dangerous in the sense of Regulation (EC) No. 1272/2008. For detailed information, see the "Downloads" section.