Express delivery
Large selection of carriers
Satisfaction guarantee
Easy-to-apply, universal, high-quality chloroprene-based gel contact adhesive for indoor use. Composition that does not drip and does not melt. It has excellent heat resistance from -15 ° C to + 70 ° C. The glued joint remains elastic and balances the internal stress. Yield approx. 2-2.5 m2 / liter of glue. SCOPE OF APPLICATION: Instantly glues laminates (Formica®), wood, boards, veneers, (foam) rubber, (artificial) leather, linoleum, cork, plastics, felt and polyester foam to each other and to chipboards, concrete, wood and metal. It is ideal for bonding materials that cannot be clamped or compressed (stressed materials, curved objects, vertical applications), or objects that must be loaded manually. The adhesive is not suitable for gluing PP, PE, expanded polystyrene and softened PVC. INSTRUCTIONS FOR USE: Bonded parts must be clean, dry and degreased. WET ADHESIVE: If at least one surface is porous, it is enough to apply the glue to one surface, join the materials and fix them until the glue hardens - 24 hours. CONTACT ADHESIVE: If both glued materials are non-porous, apply the glue to both surfaces of the glued material. Allow to dry for 10-25 minutes. All solvent must be evaporated !!! For very porous materials you can repeat several times - leather, foam,… Then press briefly and firmly together. After gluing, correction is no longer possible. Remove wet stains immediately with acetone. TIP: If the lid sticks, hold it under warm water for a while. IMPORTANT: Use in the temperature range of + 15 ° C to + 25 ° C. After use, close the container properly and store it in a dry, cool place protected from frost. The minimum shelf life is 24 months.
