Robitronic AC regulator Razer 150A

Characteristics

Electronic AC controller Robitronic Razer 150A, for RC cars Buggy, Truggy, Monster Truck and track models in 1: 8 scale. Waterproof design. Integrated cooler with fan. Wide range of settings with the SET button or via the programming card. Powered by 3-6S LiPo battery or 8-18 NiMH cells. The controller is equipped with two Deans connectors for connecting two batteries, so you can connect two 3S LiPo batteries, or one battery up to 6S LiPo and connect a jumper to a free connector.

Key properties

• Electronic controller for AC, sensorless motors
• Precise gas flow with linear acceleration
• Integrated switched BEC - 6V, for powering other components
• Possibility of setting the brake intensity and the brake in neutral
• Electronic protections: protection against battery undercharge, thermal protection, signal loss protection
• Easily programmable via the SET button or via the programming card

* For information on water resistance specifications, refer to the operating instructions. Tips and tricks for operating in a wet environment can be found in the blog.

Connection : Battery connector - 2x Deans, motor connector - 4mm sockets.

Adjustable controller functions

The controller can be easily calibrated and set using the SET button on the controller. You make the settings using the programming tree in the manual. For quick and clear settings, we recommend the programming card - R01269. Connect the programming card to the fan connector.

Powerful cooler

The controller, with its state-of-the-art Mosfet transistors and a switched BEC power supply, is cooled by a massive aluminum heatsink with distinctive ribbing. The passive cooler is complemented by a powerful fan that supplies air, which ensures safe driving in all conditions.

Waterproof * switch

A soft rubber cover prevents water, dust and dirt from entering the exposed contacts of the switch and programming button. You do not have to worry about the correct function of the switch even after driving in difficult conditions.

Power cables

The controller is equipped with soft and flexible 10AWG power cables, which allow a maximum continuous load of up to 120A. For easy and safe connection, the controller is equipped with a Deans connector.

Engine limit

• 4s LiPo: 4274er motor, <= 3000KV
• 6s LiPo: 4274er motor, <= 2400KV

We recommend buying

Programming card

for clear and easy setting of the controller, we recommend the programming card - R01269.