Spectrum receiver AR14400T 14CH PowerSafe with telemetry

Package contents

The package contains the Spectrum receiver AR20400T 20CH PowerSafe with telemetry, additional receivers: 1x Spectrum Serial SRXL2 with telemetry, 3x Spectrum DSMX SRXL2, receiver cables with lengths: 22, 30, 60 and 90 cm. 2x IC3 connector, 2x connector bed, voltage sensor, switch. Instructions in Czech and manual EN, DE, FR, IT.

Characteristics

The spectrum ™ AR14400T PowerSafe ™ is a feature-packed 14-channel receiver with integrated full-range telemetry. The receivers are designed for large models with multiple servos and high current consumption. The receiver has a dual - redundant power supply with 13AWG cables and IC3 connectors. This allows you to safely power high-current systems directly from the receiver.

The DSMX® / DSM2® modulated receiver is capable of frame rates of up to 11 ms, providing lightning-fast response ideal for high-performance applications such as aerobatic, aggressive 3D, IMAC and turbine aircraft. The receiver itself contains 4 additional SRXL2 receivers, which make full use of Spektrum MultiLink ™ technology. This patented technology eliminates reflections and signal blind spots. It helps to ensure a reliable connection between you and the plane. Another safety fuse is the electronic switch, so the current does not pass directly through it. If the switch fails, the power supply will not be interrupted.

The AR14400T PowerSafe receivers support Smart Telemetry, which means you have a perfect overview of each Smart battery separately, you can see the voltage, cell voltage, current, temperature, capacity consumed and much more in real time.

The receiver is also equipped with additional telemetry connectors for connecting a voltage, temperature, speed sensor and an expanding XBUS.

Redundant power system

The patented, rendundant power supply system is ideal for powering multi-servo aircraft models with high current loads. Power supply via two batteries (3.5 - 12.6V) has separate circuits and in case of failure of one battery the other battery immediately takes over the power supply.

Power telemetry

With Spektrum Smart batteries and Spektrum transmitters with AirWare, you will have complete power telemetry. For both batteries, the transmitter will display the voltage, current, consumed capacity, temperature and more. This gives you a perfect overview of the model's behavior.

Integrated black box protocol

When a micro SD card is inserted in the receiver, flight information will be recorded in a file on the card during operation, including flight log data, battery status and other telemetry data. Older recorded data logs will be deleted continuously, while the latest logs will be retained. It is a useful tool for performance diagnostics.

Forward Programming

You can configure the AR20400T receiver wirelessly, directly from a compatible Spektrum vysí transmitter, via the menu in the menu - Forward Programming. No separate computer or mobile device is required to set up and edit.

Micro USB port

The user-friendly Micro USB port is integrated in the receiver for easy access to firmware updates via the Spektrum PC Programmer application.

Integrated barometer

The Spektrum ™ AR20400T receiver is equipped with an integrated barometer (built-in pressure sensor), which provides telemetry data with altitude and vario, without the need to purchase additional sensors or modules.

Status LEDs

The status LED will provide information about the status of the receiver and give warning codes if a problem or condition is detected. Indicates power-on status, connected satellites, range error, SD card status, etc.

Extensive telemetry options

In addition to integrated telemetry sensors, Spectrum telemetry sensors and third-party telemetry accessories are supported. You can add powerful telemetry data tools to your model, such as GPS, airspeed sensors, engine speed, and turbine ECU telemetry from supported turbine sensors.

AR14400T 14CH PowerSafe receiver features

• Patented redundant PowerSafe system with two 13 AWG battery cables with IC3 connectors
• Perfect for energy-intensive aircraft and high-current servo applications that pump up to 35 A (maximum 50 A)
• Failure protection, servo frame rate settings and more can be set in the Forward programming menu
• Micro USB port for easy product registration and firmware update
• 12V suitable for use with ?? 12V servo applications (must be activated in Forward programming)
• The integrated battery capacity monitor automatically reports the battery capacity used during the flight and can be reset automatically when the batteries are fully charged
• The integrated Black Box telemetry protocol automatically stores all telemetry data on a Micro SD card (Micro SD card not included)
• Integrated status LEDs provide useful information during power-on, warnings and mode indications
• SRXL2 connectivity for easy single-wire connection to supported devices
• Ready to use with Spektrum Smart controllers for single-wire telemetry data without the need for modules, connections and cables
• The receiver's energy and voltage sensor and flight log telemetry data are available without the need for additional sensors
• Full-range telemetry with integrated barometer will provide altitude and vario, without additional sensors
• The soft switch allows the servo current to be conducted around the switch, so if the switch fails for any reason, the system power will not be interrupted.
• Sturdy rubber bushings and easy installation
• Able at a high speed frame rate of 11 ms
• Pairing is easier thanks to four ways to start pairing
• Integrated telemetry with built-in ports for speed, voltage, temperature sensors and X-bus for external telemetry sensors
• Compatible with Spektrum DSM2 and DSMX aircraft transmitters
• It is not compatible with the Spektrum AS3000 stabilization module
• Not compatible with DSM2 AIRMOD JR (SPMMSJR720)