Express delivery
Large selection of carriers
Satisfaction guarantee
It is a so-called liquid metal for the most demanding repairs, gluing and cold sealing. This two-component, very strong epoxy adhesive allows even the most demanding joints with high shear strength min. 130 kg / cm2. The heat resistance is -20 ° C to + 120 ° C after curing.
PROPERTIES:
is gray in color
Contains steel powder
it has filling capabilities
is thermally conductive
not electrically conductive
cures for 24 hours
SCOPE OF USE:
It is suitable for bonding metals, wood, chipboard, hard plastics, laminates, ceramics, porcelain, glass, concrete, stone, rubber, expanded polystyrene, etc. to each other and to each other. Not suitable for bonding PP, PE, Teflon and Silicone.
INSTRUCTIONS FOR USE:
The glued parts must be clean, dry and free of grease. Dispense filler and hardener in a 1: 1 volume ratio (two equal strips) and mix well. The workability of the adhesive is 4 minutes at room temperature. Apply the adhesive on one side, on both sides on rough and porous materials, press both surfaces together and fix (using clips or tape). Clean and seal tube ends properly.
Final functional strength after 24 hours. The minimum working temperature is 15 ° C.
Store in a dry and cool place.
TECHNICAL DATA:
Appearance: gray paste
Viscosity (cP / 25 ° C): 10 ^ 6
Specific gravity (25 ° C / 4 ° C): (A) 1.7; (B) 1.5
Shear tensile strength (kg / cm2): min. 130
Workability (min.): 4
Handling strength (min.): 20
Functional Strength (hr): 8
Hardness (Shore-D): 80
Mixing ratio: 1: 1 by volume
Heat resistance (° C): -20 ° C to + 120 ° C
The product contains substances classified as dangerous within the meaning of Regulation (EC) No 1272/2008. See the "Download" section for details.
