ALTECO Epoxy Putty 100g epoxy sealant

ALTECO Epoxy Putty 100g

Two-component epoxy plasticine is a modern material designed not only for bonding but also for bonding hard materials. It is a two-component sealant that cures in a very hard mass after mixing the ingredients, which can be sanded, cut, drilled and subsequently overcoated.

SCOPE OF USE:
It is an indispensable tool for repairing cracks and cracks in boilers, radiators, radiators, PVC and stoneware pipes, car bodies, hard plastics, laminates, ceramics, porcelain, glass, concrete, stone, rubber, expanded polystyrene, and more. and each other. Can be used in humid and underwater environments. Not suitable for bonding PP, PE, Teflon and Silicone.

INSTRUCTIONS FOR USE:
The glued parts must be clean and degreased. Cut off the required amount of A and B and remove the protective film. Work the material to the same color - protect your hands with gloves. Work the material firmly into the repaired place. Workability of plasticine is 30 min at room temperature. The minimum working temperature is + 5 ° C. Store in a dry and cool place.

TECHNICAL DATA:
Appearance: Beige paste
Viscosity (cP / 25 ° C): paste
Specific gravity
(25 ° C / 4 ° C): (A) 1.81; (B) 1.8
Shear tensile strength (kg / cm2): min. 130
Workability (min.): 30
Handling strength: 2 hours 30 minutes
Functional Strength (hr): 24
Hardness (Shore-D): 80
Mixing ratio: 1: 1 by volume
Heat resistance (° C): -20 ° C to + 120 ° C

REPAIR OF SCULPTURES, CRACKS AND CUTTING WITH ALTECO A + B Epoxy Putty
ALTECO Epo Putty epoxy plastics are unique in the market due to their properties. Its workability is 30 minutes, which is a sufficiently long time for quality application and subsequent treatment to the desired shape. Cut off two equally sized pieces (recommended with a wet cutter), combine the soaked fingers and knead until a solid color is formed (about one minute). / p>

Cracks, cracks:
If you are repairing a crack or crack, apply the plasticine in sufficient quantity to the damaged area and squeeze it so that the plasticine fills the entire damaged area. Subsequently, adjust the plasticine to the desired shape using conventional tools or moistened fingers. After curing, you can grind and paint plasticine.
Excellent for repairs: cracks in stairs, paving, concrete, metal, granite slabs (grave repairs),… After curing, it can be sanded, drilled and overcoated.

Jumping, flowing:
Very often you need to repair leaking waste, valve, tap etc. Simply apply plasticine directly to the damaged area. If the liquid leakage is stronger or the liquid escapes under pressure, fix the plasticine on the damaged area with a fixation tape for at least 3 hours. Take off that trap. You can regrind and rub.
Allows repairs: leaking valves, pipes, boilers, washbasin and toilet waste, gutters, punctured tanks and coolers.

Material replacement:
A frequent damage is the chipping of a piece of material (step, flower pot, granite plate, etc.) that needs to be replaced. Here is the use of ALTECO Epoxy Putty plasticine. Long workability allows us to make plasticine well
to apply, and especially during the 30 minutes we have available, to shape the plasticine into the desired shape. It can be sanded, drilled and overcoated after curing.

Complements: missing parts of stone sills, tombstones, tools (rake, shovel, mower, pump). For example, anchored dowels are well anchored.

The product contains substances classified as dangerous within the meaning of Regulation (EC) No 1272/2008. See the "Download" section for details.