Humbrol color enamel AA0549 - No 50 Green Mist - Metallic - 14ml

What are the colors of the email?
These are fast-drying solvent based paints designed specifically for plastic models. However, they can also be used on a number of other surfaces. Available in matt, semi-gloss, glossy and transparent versions and in metallic metallic finish, but also in an amazing version of polished metal (the resulting surface varies according to the type of color used)

Base layer
A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, plaster or fibreboard with penetration coatings and other materials (always test the color in advance on a small test surface to make sure it is suitable for the material )

Coverage
The 14 ml can cover approximately 0.3 m, of course depending on the thickness of the layers applied.

Usage
Apply brush directly from the can. When using the airbrush, dilute with a suitable diluent such as Humbrol Enamel Thinners. Two thin layers are better than one thicker. The usual dilution ratio is two to one in favor of the paint. Do not forget that Metalcote colors should be blanched after complete drying . Drying time
Glossy: 1-2 hours
Matt and semi-matt: 20-40 min dry to touch, up to 24 hours for complete drying
Metal: Completely dry in about 10 days. However, the drying time may vary depending on ambient temperature and humidity. Next layer: at least after 6 hours (preferably left to dry overnight)

Safety instructions
Warning! Flammable liquid and vapors. May cause drowsiness or dizziness. Contains 2-ethylhexanoate cobaltates 18%, methyl ethyl ketoxime. May produce an allergic reaction. Keep out of the reach of children. IF SWALLOWED: Rinse mouth. DO NOT induce vomiting. If you do not feel well, call a doctor. Protect from heat, hot surfaces, sparks, open fires and other sources of ignition. No smoking.
Caution! Not suitable for children under 8 years of age. Children may use the product only under the supervision of an adult." This product is not a toy.

"