Shopping Cart
There are no more items in your cart
HBL388 (0.14s/60°, 68.0kg.cm)
MKS10015
MKS
Ultra strong digital standard servo 93g with AC motor and metal gears with supply voltage range 6.0-8.4V, 2xBB. Perfect for giant model airplanes. Thrust 50.0kg.cm, speed 0.19s/60° at 6.0V, 60.0kg.cm, speed 0.16s/60° at 7.4V, thrust 68.0kg.cm,
Express delivery
Large selection of carriers
Satisfaction guarantee
Ultra powerful programmable digital AC standard servo with titanium gears and output shaft mounted on two ball bearings for giant model airplanes. For perfect cooling even at very high loads, the servo is housed in an aluminum box with a ribbed middle part.
Increased supply voltage 6.0-7.4 V (nominal), operating 6.0-8.4 V.
With the help of the USB programmer/interface for DSP-1 servos and the operating PC program, you can program a wide range of servo parameters:
Dead Band: The width of the dead band indicates the amount of change in the width of the control signal pulses at which the position of the output shaft/servo lever has not yet changed. MKS default setting = 1 µs or 1.1 µs
Lock: Setting the behavior of the servo if it does not receive a control signal - Maintains the position corresponding to the last received signal / The motor is free, the servo does not maintain any position.
Max. Duty (Max. engagement): The degree of engagement of the motor will be limited by this value - it limits the max. output of the servo motor.
Pulse Lower (Min. pulse width): The lower limit of the control pulse width and the corresponding servo deviation size will be limited by this value.
Neutral: Adjusts the width of the control pulses in the neutral/center position of the servo.
Pulse Upper (Max. pulse width): The upper limit of the control pulse width and the corresponding servo deviation size will be limited by this value.
Boost: Engine power when starting from rest. The larger the value, the more force the motor starts.
| Servo size | Standard |
| Servo type | Digital |
| Programmable | Yes |
| Thrust at 6.0 V [kg•cm] | 50 |
| Thrust at 7.4 V [kg•cm] | 60 |
| Thrust at 8.2 V [kg•cm] | 68 |
| Speed at 6.0 V [s/60°] | 0.19 |
| Speed at 7.4 V [s/60°] | 0.16 |
| Speed at 8.2 V [s/60°] | 0.14 |
| Control pulse width in neutral [µs] | 1520 |
| Repetition frequency [Hz] | 333 |
| Deadband [ms] | 0.0008 |
| Servo transmissions | Metal |
| Ball bearings | 2× |
| High voltage | Yes |
| Power supply [V] | 6 - 8.4 |
| Length [mm] | 43 |
| Width [mm] | 22 |
| Height [mm] | 39.65 |
| Weight [g] | 93.3 |
| Intended for | Airplanes |
- Programovatelný
- Ano
- Kuličková ložiska
- 2×
- Délka [mm]
- 43
- Hmotnost [g]
- 93.3
- Šířka [mm]
- 22
- Výška [mm]
- 39.65
- Velikost serva
- Standard
- Typ serva
- Digitální
- Rychlost při 6,0 V [s/60st.]
- 0.19
- Převody serva
- Kovové
- Highvoltage
- Ano
- Napájení [V]
- 6 - 8.4
- Určeno pro
- Letadla
- Tah při 6,0 V [kg•cm]
- 50
- Tah při 7,4 V [kg•cm]
- 60
- Rychlost při 7,4 V [s/60st.]
- 0.16
- Šířka řídícího impulsu v neutrálu [µs]
- 1520
- Typ motoru serva
- Brushless
- Tah při 8,2 V [kg•cm]
- 68
- Rychlost při 8,2 V [s/60st.]
- 0.14
- Opakovací frekvence [Hz]
- 333
- Pásmo necitlivosti [ms]
- 0.0008
4710150350714
Autonomous programmer/tester with touch LCD display for programming MKS digital servos and testing all types of servos. Power supply from external battery 3-15 V depending on the servo.
Last items in stock
Last items in stock
Professional servo lever for MKS servos marked X8 with 8mm output hex. Made of aluminum with M3 threads for use with ball studs. Distance of the holes from the axis of the servo: 38mm; 32mm.
Professional servo lever for MKS servos marked X8 with 8mm output hex. Made of aluminum with M3 threads for use with ball studs. Distance of the holes from the axis of the servo: 36mm; 42.5mm; 51mm.
Professional servo lever with offset for MKS servos marked X8 with 8mm output hex. Made of aluminum with M3 threads for use with ball studs. Hole spacing: 114mm; 102mm; 89mm; 76.5mm; 63.5mm
Last items in stock
Weight: 7.90-7.95g
Last items in stock
ARF kit of a semi-model of an aerobatic special with a span of 2,610 mm, intended for propulsion by a combustion gasoline engine with a content of 100-120 cc. Very light structural construction of balsa and plywood laminated with carbon fabric,...
Last items in stock
ARF kit of a semi-model of an aerobatic special with a span of 2,610 mm, intended for propulsion by an internal combustion gasoline engine with a content of 100-120 cc. Very light construction, Oracover film coating, many carbon parts.
Last items in stock
ARF kit 3D acrobatic special with a span of 2,641 mm, designed to be driven by a gasoline engine with a capacity of 120cc or an electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit 3D acrobatic special with a span of 2,642 mm, designed to be driven by a gasoline engine with a capacity of 120cc or an electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit of a 3D aerobatic special with a span of 2,642 mm, designed to be powered by a 120cc gasoline engine or an electric motor. Very light structural construction, many carbon parts.
Last items in stock
ARF kit of a 3D aerobatic special with a span of 2,641 mm, designed to be powered by a 120cc gasoline engine or an electric motor. Very light structural construction, many carbon parts.
Last items in stock
ARF kit for 3D acrobatic special with a span of 2 679 mm, designed to drive a 120 cc gasoline engine or an electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit of a 3D acrobatic special with a span of 2,670 mm, intended for propulsion by a 120cc gasoline engine or an electric motor. Very light structural construction, many carbon parts.
Last items in stock
ARF 3D acrobatic special kit with a span of 2,794 mm, designed to drive a 120cc petrol engine or an electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit of a 3D aerobatic special with a span of 2,794 mm, designed to be powered by a 120cc gasoline engine or an electric motor. Very light structural construction, many carbon parts.
Last items in stock
ARF kit 3D acrobatic special with a span of 2,896 mm, designed to be powered by a gasoline engine with a capacity of 150-180ccm. Very light construction, many carbon parts.
Last items in stock
Currently unavailable from the manufacturer, possible innovation and production in 2025. ARF kit of a 3D aerobatic special with a span of 3,353 mm, designed for propulsion by a 180cc gasoline engine or an electric motor. Very light structural...
Last items in stock
ARF kit 3D acrobatic special with a span of 1,778 mm, designed to be driven by an internal combustion or electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit of a 3D acrobatic special with a span of 1,778 mm, intended for propulsion by an electric motor or an internal combustion engine. Very light structural construction, many carbon parts.
Last items in stock
ARF kit semi-scale aerobatic special with a wingspan of 1,850 mm, designed for propulsion by a 30-40 cc internal combustion gasoline engine or an electric motor. Very light construction made of balsa and plywood laminated with carbon fabric, covered...
ARF kit 3D acrobatic special with a span of 1,879 mm, designed to be driven by an electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit 3D acrobatic special with a span of 1,905 mm, designed to be driven by an electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit of a 3D acrobatic special with a span of 1,980 mm, intended for drive by an AC electric motor of 3-4 kW. Very light structural construction, many carbon parts.
Last items in stock
ARF kit of a 3D acrobatic special with a span of 1,980 mm, intended for drive by an AC electric motor of 3-4 kW. Very light structural construction, many carbon parts.
Last items in stock
ARF kit 3D acrobatic special with a span of 2,159 mm, designed to be powered by a gasoline engine with a capacity of 50-60ccm or electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit 3D acrobatic special with a span of 2,159 mm, designed to be powered by a gasoline engine with a capacity of 50-60ccm or electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit 3D acrobatic special with a span of 2,159 mm, designed to be powered by a gasoline engine with a capacity of 50-60ccm or electric motor. Very light construction, many carbon parts.
ARF kit of a 3D acrobatic special with a span of 2210 mm, intended for propulsion by a gasoline engine with a content of 50-60 cc or an electric motor. Very light structural construction, many carbon parts.
ARF kit of a 3D acrobatic special with a span of 2210 mm, intended for propulsion by a gasoline engine with a content of 50-60 cc or an electric motor. Very light structural construction, many carbon parts.
Last items in stock
ARF stavebnice 3D akrobatického speciálu o rozpětí 2 165 mm, určená pro pohon elektromotorem. Velmi lehká konstrukční stavba, mnoho uhlíkových dílů.
Last items in stock
ARF kit of a 3D acrobatic special with a span of 2160 mm, intended for propulsion by a gasoline engine with a content of 50-61 cc or an electric motor with a 12S Lipo power supply. Very light structural construction, many carbon parts.
Last items in stock
Constructive aerobatic biplane from the company Pilot RC with a wingspan of 2.2 meters and powered by a 100-120cc gasoline engine. Very light plywood construction, Oracover iron-on film coating, many carbon parts.
Last items in stock
ARF semi-scale model of an acrobatic special with a span of 2,240 mm, designed to be driven by a combustion gasoline engine with a capacity of 60-76 cc or an electric motor. Very light construction, Oracover foil cover, many carbon parts.
Last items in stock
ARF kit of a 3D aerobatic special with a span of 2,238 mm, designed to be powered by a 50-60cc gasoline engine or an electric motor. Very light structural construction, many carbon parts.
Last items in stock
ARF kit of a 3D aerobatic special with a span of 2,238 mm, designed to be powered by a 50-60cc gasoline engine or an electric motor. Very light structural construction, many carbon parts.
Last items in stock
ARF kit of a semi-maquette of an aerobatic special with a span of 2,290 mm, intended for propulsion by an internal combustion gasoline engine with a content of 50-76 cc or an electric motor. Very light carbon coated plywood construction, Oracover film...
Last items in stock
ARF kit of a semi-scale aerobatic special with a wingspan of 2,290 mm, designed for propulsion by a 50-76 cc internal combustion gasoline engine or an electric motor. Very lightweight construction made of carbon-coated plywood, Oracover foil coating,...
Last items in stock
ARF kit of a semi-model of an aerobatic special with a span of 2,290 mm, intended for propulsion by an internal combustion gasoline engine with a content of 50-76 cc or an electric motor. Very light carbon coated plywood construction, Oracover film...
Last items in stock
ARF kit 3D acrobatic special with a span of 2,312 mm, designed to be powered by a gasoline engine with a capacity of 60-70ccm or electric motor. Very light construction, many carbon parts.
ARF kit 3D acrobatic special with a span of 2,312 mm, designed to be powered by a gasoline engine with a capacity of 60-70ccm or electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit of a 3D aerobatic special with a span of 2,312 mm, designed to be powered by a 60-70cc gasoline engine or an electric motor. Very light structural construction, many carbon parts.
Last items in stock
ARF kit 3D acrobatic special with a span of 2,336 mm, designed to be powered by a gasoline engine with a capacity of 60-70ccm or electric motor. Very light construction, many carbon parts.
Last items in stock
ARF kit 3D acrobatic special with a span of 2,413 mm, designed for electric motor drive. Very light construction, many carbon parts.
Tap to zoom
