Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek
Obrázek

TRACER 1/10 kit 2.4GHz, Orange

RGT-EX86180PRO-1
RGT
Fully assembled RC crawler/expedition special with DC motor, waterproof controller and two powerful front and rear steering servos (4WS) for advanced riders. Set including 2.4Ghz RC kit. Without drive battery and charger. Orange car
More info
In stock - main warehouse: 2 pcs
Recommended retail price
492.24 €
Your price with VAT
()
406.81 €
Price without VAT
406.81 €

  • Did you find a better price?
  • Did you find a better price?

    * Required fields

    We will reply as soon as possible, usually within a few hours.

    By submitting the form you agree to the processing of your personal data (read)

     

     

    Express delivery

     

    Large selection of carriers

     

    Satisfaction guarantee

     

    RGT TRACER

    Tracer is a technically advanced off-road special for true enthusiasts with a design focused on overcoming the most difficult obstacles. The RTR version is assembled with a 313 mm wheelbase, gantry axles, 10.6% increased front axle speed (overdrive), two servos for two-axle drive and a colored painted body.

    The chassis includes metal and carbon main parts such as axles, transmissions, drive shafts, suspension lines, chassis ladder dampers and more.

    The transmission uses reverse rotation and increased front axle speed (overdrive) to reduce torque-twist and improve traction during acceleration and climbing.

    The ground clearance is significantly increased by the counter axles in combination with the bent suspension lines. The front and rear steering system uses a CVD structure for an increased turning angle with positive Ackermann.

    The RTR version includes a powerful 20T RC550 DC motor, a 60A waterproof Hobbywing controller, a pair of 15kg servos with metal gears for the front and rear axles, and a G4P-4WS 2.4Ghz radio.


    Properties

    • Gearbox with metal gears and reverse rotation.
    • Two-axle steering system (4WS) with a pair of servos located on the axles.
    • Portal axles with curved suspension lines for increased ground clearance.
    • Realistic bumpers with towing eyes.
    • Adjustable metal dampers.
    • Increased speed of the front axle (overdrive): 10.6%.
    • Metal CVD drive shafts, sealed quality ball bearings.
    • 4.5 mm carbon ladders of the chassis with free positions for adjusting the wheelbase, suspension, bodywork, bumpers, etc.
    • Adjustable carbon battery holder.
    • 1.9 inch wheels, tires with wider and deeper tread for increased traction.
    • Powerful RC550 20T DC motor, 60A HobbyWing controller and a pair of 15kg servos with metal gears for the front and rear axles.
    • G4P-4WS 2.4GHz 4-channel radio for steering two axles.


    The RTR set includes:

    • Assembled model ready to drive
    • RC steering wheel kit 2.4GHz
    • Mockup accessories

    Necessary accessories: 4xAA batteries for the transmitter, a 7.4V LiPo or 11.1V LiPo drive battery and a corresponding charger.

    ** Spare parts that are not in our offer can be ordered from the manufacturer on request. You can find their complete list in the manual.

    Scale 1:10 a.m
    Wheelbase [mm] 313
    Width [mm] 252
    Height [mm] 220
    Length [mm] 450
    Weight [kg] [kg] 2.76
    Transmitter battery 4x AA
    Frequency [GHz] 2.4
    Servo transmissions Metal
    Li-Po [art.] 2
    Li-Po [art.] 3
    230 +12

    Charger TD 610 Pro 100W

    1GT0114
    Microprocessor quick charger controlled by touch screen with balancer for 1-14 cells NiCd / NiMH, 1-6 cells LiPo / Li-ion / Li-F / LiHVe, 2-20V Pb current 0.2-10A (max. 100W). Discharge 0.1-3.0A (max. 8W). Mains or 10-18V supply. MicroUSB port, fan...
    Obrázek Obrázek 2
    • New
    Miniature two-channel fast charger with balancers for 1-16 cells NiCd/NiMH, 1-6 cells Li-Po/Li-ion/Li-Fe/LiHV/ULiHV, 2-20V Pb current 0.2-10 A (max. 2x250 W or 1x400 W/0.2-16 A in parallel mode). Power supply 10-30 V. Measurement of internal...
    Two-channel fast charger with balancers for 1-16 pcs. NiCd/NiMH, 1–6 pcs. LiPo/Li-ion/LiFe/ LiHV, 2–24V Pb current 0.1–10 A (max. 2x100 W). Discharge 0.1-5.0 A (max. 2x10 W). Power supply 11-18 V/230 V. Internal resistance measurement, USB port for...
    Set of 4 bits for electric screwdrivers, made of hard steel with a titanium finish. Includes 1.5mm, 2.0mm, 5.5mm and 7.0mm bit for 6.35mm hex adapter.
    Electric screwdriver of compact dimensions with 3.6V 900mAh battery and USB charging for screwing in any material, including hard plastics. The package also includes a charging cable and 1.5mm, 2.0mm, 5.5mm and 7.0mm bits.
    Electric screwdriver of compact dimensions with 3.6V 900mAh battery and USB charging for screwing in any material, including hard plastics. The package also includes a charging cable and a 2.0 mm Allen bit.
    12V

    SKY RC B6 neo charger 200W

    SKY RC
    3SK0198
    Powerful pocket microprocessor fast charger with balancer for 1-15 NiCd/NiMH cells, 1-6 LiPo/Li-ion/LiFe/LiHV, 6/12V Pb current 0.1-10A (max. 200W). Discharge 0.1-2A (max. 24W). Power supply 10-28V or 12-20V USB PD3.0/QC. Measurement of internal...
    230 +12

    SKY RC D200 Neo charger 2x 400W

    SKY RC
    3SK10196
    Two-channel fast charger with balancers for 4-15 cells NiCd/NiMH, 1-6 cells LiPo/Li-ion/LiFe/ LiHV, 6/12/24V Pb and maintenance-free Pb AGM with a current of 0.1-20A (max. 2x400W) . Discharge 0.1-2.0A (max. 2x10W). Power supply 12 V/230 V. Measurement...
    Small two-channel fast charger with balancers for 6-8 cells NiCd / NiMH, 2-4 cells LiPo / Li-ion / LiFe / LiHV, 6 / 12V Pb and maintenance-free Pb AGM current 0.1-5A (max. 2x50W). Power supply 230 V.
    230 +12

    SKY RC T200 charger 2x100W

    SKY RC
    3SK10155
    Dual-channel quick charger with balancers for 1-15 cells NiCd / NiMH, 1-6 cells Li-poly / Li-ion / Li-Fe / LiHV, 2-20V Pb and maintenance-free Pb AGM current 0.1-12A (max. 2x100W or 1x 200W). Discharge 0.1-2.0A (max. 2x10W). Power supply 12 V / 230 V....
    230

    SKYRC S65 charger 65W / 230V

    SKY RC
    3SK10152
    Microprocessor quick charger 65 W with balancer for 6-8 cells NiCd / NiMH, 2-4 cells Li-poly / Li-ion / Li-Fe / LiHV, 6-12V Pb current 0.1-6A. Discharge max. 2A / 10W. Mains supply 100-240V / 50-60Hz.
    230 +12

    X2 Mini charger

    GT Hobbies
    1GT0119
    Small two-channel microprocessor fast charger with balancers for 1-8 cells NiCd / NiMH, 1-4 cells Li-po / Li-HV / Li-ion / Li-Fe, 2-14V Pb current 0.1-10A (max. 2x 100W). Mains or 19-26V supply. MicroUSB port. Dimensions 137.5x141.5x55.5mm, weight 554g.
    230 +12

    X4 Mini charger

    GT Hobbies
    1GT0118
    Small four-channel microprocessor fast charger with balancers for 1-8 cells NiCd / NiMH, 1-4 cells Li-po / Li-HV / Li-ion / Li-Fe, 2-14V Pb current 0.1-10A (max. 4x 100W). Mains or 19-26V supply. MicroUSB port. Dimensions 137.5x141.5x55.5mm, weight 554g.
    DC

    550/8020 engine

    RGT
    RGT-R86538
    RGT

    87T main gear wheel

    RGT
    RGT-R86028
    RGT

    Gear wheel with axle

    RGT
    RGT-R86008
    Obrázek
    Last items in stock
    RGT

    Line pin set

    RGT
    RGT-R86474
    RGT

    Nuts M4 (8pcs)

    RGT
    RGT-R86052
    Obrázek
    Last items in stock
    RGT

    Pinion 14T

    RGT
    RGT-R86044
    Obrázek
    Last items in stock
    RGT

    Pins 5.9mm long (8pcs)

    RGT
    RGT-R86049
    Digital

    Servo - 15kg

    RGT
    RGT-R86076
    RGT

    Set of body pillars

    RGT
    RGT-R86018
    car Fittings

    Roof light ramp 55mm - JR connector

    Kavan
    KAV52.1.035
    Light ramp with 16 white LEDs with high brightness for RC cars. Power supply 5 V, consumption 25-35 mA. Power cable 30 cm long with JR connector. Ramp length 55 mm.
    car Fittings

    Roof light ramp 70mm - JR connector

    Kavan
    KAV52.1.037
    Light ramp with 20 white LEDs with high brightness for RC cars. Power supply 5 V, consumption 30-40 mA. Power cable 30 cm long with JR connector. Ramp length 70 mm.
    complete wheels

    CR-ARDENT 1.9 - Complete wheels with black discs, 2 pcs

    Louise RC
    L-T3232VB
    Complete wheels for crawler/expedition 1/10. Universal tires suitable for dry and wet conditions, for any surface. Discs for 12mm hex drivers.
    Obrázek Obrázek 2
    Last items in stock
    complete wheels

    CR-ARDENT 1.9 - Complete wheels with chrome discs, 2 pcs

    Louise RC
    L-T3232VBC
    Complete wheels for crawler/expedition 1/10. Universal tires suitable for dry and wet conditions, for any surface. Discs for 12mm hex drivers.
    Gumy

    CR-ARDENT 1.9 - Tires with insert, 2 pcs

    Louise RC
    L-T3232VI
    Universal tires for crawler/expedition 1/10, suitable for dry and wet, for any surface.
    complete wheels

    CR-CHAMP 1.9 - Complete wheels with black discs, 2 pcs

    Louise RC
    L-T3231VB
    Complete wheels for crawler/expedition 1/10. Universal tires suitable for dry and wet conditions, for any surface. Discs for 12mm hex drivers.
    complete wheels

    CR-CHAMP 1.9 - Complete wheels with chrome discs, 2 pcs

    Louise RC
    L-T3231VBC
    Complete wheels for crawler/expedition 1/10. Universal tires suitable for dry and wet conditions, for any surface. Discs for 12mm hex drivers.
    Gumy

    CR-CHAMP 1.9 - Tires with liner, 2 pcs

    Louise RC
    L-T3231VI
    Universal tires for crawler/expedition 1/10, suitable for dry and wet, for any surface.
    complete wheels

    CR-GRIFFIN 1.9 - Complete wheels with black discs, 2 pcs

    Louise RC
    L-T3230VB
    Complete wheels for crawler/expedition 1/10. Universal tires suitable for dry and wet conditions, for any surface. Discs for 12mm hex drivers.
    complete wheels

    CR-GRIFFIN 1.9 - Complete wheels with chrome discs, 2 pcs

    Louise RC
    L-T3230VBC
    Complete wheels for crawler/expedition 1/10. Universal tires suitable for dry and wet conditions, for any surface. Discs for 12mm hex drivers.
    Gumy

    CR-GRIFFIN 1.9 - Tires with liner, 2 pcs

    Louise RC
    L-T3230VI
    Universal tires for crawler/expedition 1/10, suitable for dry and wet, for any surface.
    complete wheels

    CR-ROWDY 1.9 - Complete wheels with black discs, 2 pcs

    Louise RC
    L-T3233VB
    Complete wheels for crawler/expedition 1/10. Universal tires suitable for dry and wet conditions, for any surface. Discs for 12mm hex drivers.
    complete wheels

    CR-ROWDY 1.9 - Complete wheels with chrome discs, 2 pcs

    Louise RC
    L-T3233VBC
    Complete wheels for crawler/expedition 1/10. Universal tires suitable for dry and wet conditions, for any surface. Discs for 12mm hex drivers.
    Gumy

    CR-ROWDY 1.9 - Tires with liner, 2 pcs

    Louise RC
    L-T3233VI
    Universal tires for crawler/expedition 1/10, suitable for dry and wet, for any surface.
    Adapters

    Adapter Dean-T Female - Tamiya Female

    Kavan
    KAV36.708
    Dean-T Female to Tamiya Female connector adapter. 1 pc in a package.
    3S LiPo battery with T-DEAN connector, capacity 5300mAh, voltage 11.1V, 40C discharge current (short-term 80C), balance connector JST-XH, dimensions 138.6 x 46.6 x 30 mm, weight 386 g.
    2S LiPo battery with T-DEAN connector, capacity 3200mAh, voltage 7.4V, 30C discharge current (short-term 60C), balance connector JST-XH, dimensions 134.5 x 46.3 x 23.8 mm, weight 187 g.
    propulsion

    KAVAN NiMH 3000mAh/7.2V + Tamiya

    Kavan
    KAV33.0372
    Six-cell 7.2 V NiMH drive battery 3000 mAh for recreational and sports models of RC cars 1:10, other land vehicles and ship models. Max. discharge current 20A (peak 40A), max. charging current 3A. Classic "tube" layout with standard Tamiya® connector
    propulsion

    KAVAN NiMH 4000mAh/7.2V + Tamiya

    Kavan
    KAV33.0374
    Six-cell 7.2 V NiMH drive battery 4000 mAh for recreational and sports models of RC cars 1:10, other land vehicles and ship models. Max. discharge current 20A (peak 40A), max. charging current 4A. Classic "tube" layout with standard Tamiya® connector
    propulsion

    KAVAN NiMH 5000mAh/7.2V + Tamiya

    Kavan
    KAV33.0376
    Six-cell 7.2 V NiMH drive battery 5000 mAh for recreational and sports models of RC cars 1:10, other land vehicles and ship models. Max. discharge current 20A (peak 40A), max. charging current 5A. Classic "tube" layout with standard Tamiya® connector
    with T-DEAN connector, capacity 5600mAh, 60C discharge current (short-term 120C), voltage 7.4V/2S, length: 140mm, width: 47mm, height: 25mm, weight: 270g
    Team Corally SPORT RACING version for beginners with a capacity of 4200mAh in Hardcase version. Configuration: 2S 1P, dimensions: 133x44x25mm, T-Dean power connector, XH-2S balance connector.
    Obrázek
    Last items in stock
    Team Corally POWER RACING version for beginner racers with 5400mAh capacity in SEMI SOFT Hardcase version. Dimensions: 138x43x31mm, weight: 313g, charging current max. 3C/15Amp., T-DYN power connector, XH-3S balance connector.
    Team Corally SPORT RACING version for beginners with a capacity of 5500mAh in Hardcase version. Configuration: 2S 1P, dimensions: 138x47x25mm, T-Dean power connector, XH-2S balance connector.
    Team Corally SPORT RACING version for beginners with a capacity of 6900mAh in Hardcase version. Configuration: 3S 1P, dimensions: 138x47x35mm, T-Dean power connector, XH-3S balance connector.
    car Fittings

    Barrel green expedition 1/10

    Kavan
    KAV52.1.112
    Height 95 mm. Diameter 60 mm.
    car Fittings

    Barrel red expedition 1/10

    Kavan
    KAV52.1.110
    Height 95 mm. Diameter 60 mm.
    car Fittings

    Expedition 1/10 toolbox

    Kavan
    KAV52.1.113
    Box length 30 mm.
    car Fittings

    Expedition Metal Ax 1/10

    Kavan
    KAV52.1.104
    Obrázek Obrázek 2
    Last items in stock
    car Fittings

    Metal suitcase blue expedition 1/10

    Kavan
    KAV52.1.121
    Dimensions 100x70x17 mm.
    Obrázek Obrázek 2
    Last items in stock
    car Fittings

    Side roller awning black expedition 1/10

    Kavan
    KAV52.1.117
    Dimensions width 230 mm, length (expanded) 225 mm.
    Obrázek Obrázek 2
    Last items in stock
    car Fittings

    Sleeping bag green expedition 1/10

    Kavan
    KAV52.1.143
    Packaged length 98 mm.
    Obrázek
    Last items in stock
    car Fittings

    Travel bag green expedition 1/10

    Kavan
    KAV52.1.141
    Length 100 mm.