ROCK CRUISER PRO V2 1/10, White
RGT-EX86100PRO-V2-2
RGT
Assembled RC crawler/expedition special without electronic components. White body.
Express delivery
Large selection of carriers
Satisfaction guarantee
RGT EX86100 PRO V2
This version is factory built with upgraded parts, no electronic components.
The EX86100PRO V2 features front and rear metal axles, metal CVD half-axles, aluminum chassis center section, metal gears (except the main gear), aluminum shocks, carbon chassis ladders and a realistic fully assembled lexan body.
The body is painted and has transparent windows. It is equipped with plastic mudguards, a roof garden, a bed rail, a radiator grill, rearview mirrors, wipers, a snorkel and other accessories. In addition, you will find angel-eyes LED lights.
Properties
- Metal axles front and rear, metal gears, gearbox housing and CVD drive shafts.
- Aluminum mounting of the steering servo on the front axle, 25-tooth servo lever, inclined caster hinges of the front weights.
- Realistic bumpers with towing eyes.
- Adjustable aluminum shock absorbers with double springs.
- Increased speed of the front axle (overdrive): 10.6%.
- Gear wheels made of high-strength aluminum (except for the main gear wheel).
- Metal CVD half shafts, sealed high quality bearings.
- Reverse gear system to reduce torque-twist during acceleration and climbing.
- Aluminum motor mount, suitable for 14T to 23T pinion.
- Aluminum center part of the chassis, curved lines to increase ground clearance.
- 4.5 mm carbon ladders of the chassis with free positions for adjusting the wheelbase, suspension, bodywork, bumpers, etc.
- 1.9-inch wheels, newly designed wider tires with deeper tread for improved off-road capability.
Scale | 1:10 a.m |
Wheelbase [mm] | 313 |
Width [mm] | 235 |
Height [mm] | 260 |
Length [mm] | 525 |
Microprocessor quick charger controlled by touch screen with balancer for 1-14 cells NiCd / NiMH, 1-6 cells LiPo / Li-ion / Li-F / LiHVe, 2-20V Pb current 0.2-10A (max. 100W). Discharge 0.1-3.0A (max. 8W). Mains or 10-18V supply. MicroUSB port, fan...
Miniature two-channel fast charger with balancers for 1-16 cells NiCd/NiMH, 1-6 cells Li-Po/Li-ion/Li-Fe/LiHV/ULiHV, 2-20V Pb current 0.2-10 A (max. 2x250 W or 1x400 W/0.2-16 A in parallel mode). Power supply 10-30 V. Measurement of internal...
Two-channel fast charger with balancers for 1-16 pcs. NiCd/NiMH, 1–6 pcs. LiPo/Li-ion/LiFe/ LiHV, 2–24V Pb current 0.1–10 A (max. 2x100 W). Discharge 0.1-5.0 A (max. 2x10 W). Power supply 11-18 V/230 V. Internal resistance measurement, USB port for...
Set of 4 bits for electric screwdrivers, made of hard steel with a titanium finish. Includes 1.5mm, 2.0mm, 5.5mm and 7.0mm bit for 6.35mm hex adapter.
Electric screwdriver of compact dimensions with 3.6V 900mAh battery and USB charging for screwing in any material, including hard plastics. The package also includes a charging cable and 1.5mm, 2.0mm, 5.5mm and 7.0mm bits.
Electric screwdriver of compact dimensions with 3.6V 900mAh battery and USB charging for screwing in any material, including hard plastics. The package also includes a charging cable and a 2.0 mm Allen bit.
Powerful pocket microprocessor fast charger with balancer for 1-15 NiCd/NiMH cells, 1-6 LiPo/Li-ion/LiFe/LiHV, 6/12V Pb current 0.1-10A (max. 200W). Discharge 0.1-2A (max. 24W). Power supply 10-28V or 12-20V USB PD3.0/QC. Measurement of internal...
Two-channel fast charger with balancers for 4-15 cells NiCd/NiMH, 1-6 cells LiPo/Li-ion/LiFe/ LiHV, 6/12/24V Pb and maintenance-free Pb AGM with a current of 0.1-20A (max. 2x400W) . Discharge 0.1-2.0A (max. 2x10W). Power supply 12 V/230 V. Measurement...
Small two-channel fast charger with balancers for 6-8 cells NiCd / NiMH, 2-4 cells LiPo / Li-ion / LiFe / LiHV, 6 / 12V Pb and maintenance-free Pb AGM current 0.1-5A (max. 2x50W). Power supply 230 V.
Dual-channel quick charger with balancers for 1-15 cells NiCd / NiMH, 1-6 cells Li-poly / Li-ion / Li-Fe / LiHV, 2-20V Pb and maintenance-free Pb AGM current 0.1-12A (max. 2x100W or 1x 200W). Discharge 0.1-2.0A (max. 2x10W). Power supply 12 V / 230 V....
Microprocessor quick charger 65 W with balancer for 6-8 cells NiCd / NiMH, 2-4 cells Li-poly / Li-ion / Li-Fe / LiHV, 6-12V Pb current 0.1-6A. Discharge max. 2A / 10W. Mains supply 100-240V / 50-60Hz.
Small two-channel microprocessor fast charger with balancers for 1-8 cells NiCd / NiMH, 1-4 cells Li-po / Li-HV / Li-ion / Li-Fe, 2-14V Pb current 0.1-10A (max. 2x 100W). Mains or 19-26V supply. MicroUSB port. Dimensions 137.5x141.5x55.5mm, weight 554g.
Small four-channel microprocessor fast charger with balancers for 1-8 cells NiCd / NiMH, 1-4 cells Li-po / Li-HV / Li-ion / Li-Fe, 2-14V Pb current 0.1-10A (max. 4x 100W). Mains or 19-26V supply. MicroUSB port. Dimensions 137.5x141.5x55.5mm, weight 554g.
For 12mm hex drivers, width 26mm, rear inner diameter 45mm.
For 12mm hex drivers, width 26mm, rear inner diameter 45mm.
For 12mm hex drivers, width 26mm, rear inner diameter 45mm.
For 12mm hex drivers, width 26mm, rear inner diameter 45mm.
For 12mm hex drivers, width 26mm, rear inner diameter 45mm. Weight including screws 79 g.
For 12mm hex drivers, width 26mm, rear inner diameter 45mm.
For 12mm hex drivers, width 26mm, rear inner diameter 45mm.
For 12mm hex drivers, width 26mm, rear inner diameter 45mm.
For 12mm hex drivers, width 26mm, rear inner diameter 45mm.
For 12mm hex drivers, width 26mm, rear inner diameter 45mm.
discs
1.9'' Aluminum beadlock discs offset -10mm for 1/10 crawler/expedition black - 2 pcs
Kavan
KAV52.2.015
For 12mm hex carriers, offset -10mm (wheel offset outwards), width 26mm, inner diameter of the rear part 45mm.
discs
1.9'' Aluminum beadlock discs offset -10mm for 1/10 crawler/expedition bronze - 2 pcs
Kavan
KAV52.2.017
For 12mm hex carriers, offset -10mm (wheel offset outwards), width 26mm, inner diameter of the rear part 45mm.
discs
1.9'' Aluminum beadlock discs offset -10mm for 1/10 crawler/expedition bronze - 2 pcs
Kavan
KAV52.2.020
For 12mm hex carriers, offset -10mm (wheel offset outwards), width 26mm, inner diameter of the rear part 45mm.
discs
1.9'' Aluminum beadlock discs offset -10mm for 1/10 crawler/expedition silver - 2 pcs
Kavan
KAV52.2.016
For 12mm hex carriers, offset -10mm (wheel offset outwards), width 26mm, inner diameter of the rear part 45mm.
discs
1.9'' Aluminum beadlock discs six-spoke for 1/10 crawler/expedition black - 2 pcs
Kavan
KAV52.2.012
For 12mm hex drivers, width 26mm, rear inner diameter 45mm.
discs
1.9'' Aluminum beadlock discs six-spoke for 1/10 crawler/expedition silver - 2 pcs
Kavan
KAV52.2.013
For 12mm hex drivers, width 26mm, rear inner diameter 45mm.
discs
1.9'' Aluminum beadlock six-spoke wheels for 1/10 crawler/expedition red - 2 pcs
Kavan
KAV52.2.011
For 12mm hex drivers, width 26mm, rear inner diameter 45mm.
Inner diameter 53.3mm / 48.9mm, width 21.5mm, weight 72g.
Complete wheels for crawler/expedition 1/10. Universal tires suitable for dry and wet conditions, for any surface. Discs for 12mm hex drivers.
Complete wheels for crawler/expedition 1/10. Universal tires suitable for dry and wet conditions, for any surface. Discs for 12mm hex drivers.
Universal tires for crawler/expedition 1/10, suitable for dry and wet, for any surface.
Complete wheels for crawler/expedition 1/10. Universal tires suitable for dry and wet conditions, for any surface. Discs for 12mm hex drivers.
Complete wheels for crawler/expedition 1/10. Universal tires suitable for dry and wet conditions, for any surface. Discs for 12mm hex drivers.
Universal tires for crawler/expedition 1/10, suitable for dry and wet, for any surface.
Complete wheels for crawler/expedition 1/10. Universal tires suitable for dry and wet conditions, for any surface. Discs for 12mm hex drivers.
Complete wheels for crawler/expedition 1/10. Universal tires suitable for dry and wet conditions, for any surface. Discs for 12mm hex drivers.
Universal tires for crawler/expedition 1/10, suitable for dry and wet, for any surface.
Universal tires for crawler/expedition 1/10, suitable for dry and wet, for any surface.
Complete wheels for crawler/expedition 1/10. Universal tires suitable for dry and wet conditions, for any surface. Discs for 12mm hex drivers.
Complete wheels for crawler/expedition 1/10. Universal tires suitable for dry and wet conditions, for any surface. Discs for 12mm hex drivers.
Universal tires for crawler/expedition 1/10, suitable for dry and wet, for any surface.
Universal tires for crawler/expedition 1/10, suitable for dry and wet, for any surface.
Rigid body made of ABS in a scale of 1:10 with a wheelbase of 313 mm.
Rigid body made of ABS in a scale of 1:10 with a wheelbase of 313 mm.
Tuhá karoserie z ABS v měřítku 1:10 s rozvorem 313 mm.
Dean-T Female to Tamiya Female connector adapter. 1 pc in a package.
Hobby
ANTIX by LRP 3100mAh - 7.4V - 50C LiPo Car Stickpack Hardcase - T-DYN connector
ANTIX
L430413U
with T-DYN connector, capacity 3100mAh, 50C discharge current (short-term 60C), balance connectors XH-2S, voltage 7.4V / 2S, length: 134mm, width: 45.0mm, height: 24mm, weight: 193-195g.
Hobby
ANTIX by LRP 4100mAh - 11.1V - 50C LiPo Car Stickpack Hardcase - T-DYN connector
ANTIX
L430431U
with T-DYN connector, capacity 4100mAh, 50C discharge current (short-term 60C), balance connectors XH-3S, voltage 11.1V / 3S, length: 138mm, width: 46.0mm, height: 25mm, weight: 347g.
Hobby
ANTIX by LRP 4100mAh - 7.4V - 50C LiPo Car Stickpack Hardcase - T-DYN connector
ANTIX
L430414U
with T-DYN connector, capacity 4100mAh, 50C discharge current (short-term 60C), balance connectors XH-2S, voltage 7.4V / 2S, length: 135mm, width: 45.0mm, height: 24mm, weight: 233-234g.
Hobby
ANTIX by LRP 5900mAh - 7.4V - 50C LiPo Car Stickpack Hardcase - T-DYN connector
ANTIX
L430421U
with T-DYN connector, capacity 5900mAh, 50C discharge current (short-term 60C), balance connectors XH-2S, voltage 7.4V / 2S, length: 138mm, width: 46.0mm, height: 25mm, weight: 310g.
3S LiPo battery with T-DEAN connector, capacity 5300mAh, voltage 11.1V, 40C discharge current (short-term 80C), balance connector JST-XH, dimensions 138.6 x 46.6 x 30 mm, weight 386 g.
2S LiPo battery with T-DEAN connector, capacity 3200mAh, voltage 7.4V, 30C discharge current (short-term 60C), balance connector JST-XH, dimensions 134.5 x 46.3 x 23.8 mm, weight 187 g.
Six-cell 7.2 V NiMH drive battery 3000 mAh for recreational and sports models of RC cars 1:10, other land vehicles and ship models. Max. discharge current 20A (peak 40A), max. charging current 3A. Classic "tube" layout with standard Tamiya® connector
Six-cell 7.2 V NiMH drive battery 4000 mAh for recreational and sports models of RC cars 1:10, other land vehicles and ship models. Max. discharge current 20A (peak 40A), max. charging current 4A. Classic "tube" layout with standard Tamiya® connector
Six-cell 7.2 V NiMH drive battery 5000 mAh for recreational and sports models of RC cars 1:10, other land vehicles and ship models. Max. discharge current 20A (peak 40A), max. charging current 5A. Classic "tube" layout with standard Tamiya® connector
with T-DEAN connector, capacity 5600mAh, 60C discharge current (short-term 120C), voltage 7.4V/2S, length: 140mm, width: 47mm, height: 25mm, weight: 270g
with T-DYN connector, capacity 3100mAh, 50C discharge current (short-term 60C), balance connectors XH-2S, voltage 7.4V / 2S, length: 134mm, width: 45.0mm, height: 24mm, weight: 193-195g.
with T-DYN connector, capacity 4100mAh, 50C discharge current (short-term 60C), balance connectors XH-2S, voltage 7.4V / 2S, length: 135mm, width: 45.0mm, height: 24mm, weight: 233-234g.
Team Corally SPORT RACING version for beginners with a capacity of 4200mAh in Hardcase version. Configuration: 2S 1P, dimensions: 133x44x25mm, T-Dean power connector, XH-2S balance connector.
Team Corally POWER RACING version for beginner racers with 5400mAh capacity in SEMI SOFT Hardcase version. Dimensions: 138x43x31mm, weight: 313g, charging current max. 3C/15Amp., T-DYN power connector, XH-3S balance connector.
Team Corally SPORT RACING version for beginners with a capacity of 5500mAh in Hardcase version. Configuration: 2S 1P, dimensions: 138x47x25mm, T-Dean power connector, XH-2S balance connector.
Team Corally SPORT RACING version for beginners with a capacity of 6900mAh in Hardcase version. Configuration: 3S 1P, dimensions: 138x47x35mm, T-Dean power connector, XH-3S balance connector.
Height 95 mm. Diameter 60 mm.
Height 95 mm. Diameter 60 mm.
Box length 30 mm.
Height 40 mm.
Height 40 mm.
Length 2x200 mm + 2x115 mm.
Length 2x200 mm + 2x115 mm.
Dimensions: width 5 mm, length 350 mm.
Length 2x200 mm + 2x115 mm.
Bucket height 27 mm.
Dimensions 100x70x17 mm.
Dimensions 100x70x17 mm.
Canoe length 180 mm. Ramp length 130 mm. Tank length 120 mm.
Canoe length 180 mm. Ramp length 130 mm. Tank length 120 mm.
Dimensions width 230 mm, length (expanded) 225 mm.
Dimensions width 230 mm, length (expanded) 225 mm.
Packaged length 98 mm.
Length 90 mm.
Packaged length 98 mm.
Dimensions - total length: 290 mm, total width: 190 mm, wheel outer diameter: 95 mm, tire width: 36 mm.
Length 100 mm.
Dimensions: width 5 mm, length 350 mm (flexible).
Dimensions: width 5 mm, length 350 mm (flexible).
Dimensions: width 5 mm, length 400 mm (flexible).
Length 100 mm.
Length 100 mm.