Express delivery
Large selection of carriers
Satisfaction guarantee
The package contains a completely assembled RC model carLosi Lasernut U4 Rock Racer 1:10, steering wheel RC set Spektrum DX3, 4xAA batteries for the transmitter and detailed instructions for use. The package does not include a propulsion battery and charger.
Versatile RC model car Losi Lasernut U4 Rock Racer 1:10 in RTR design with 4WD drive. LED body lighting, AC motor Spektrum Firma 4P 1900kv 550 and regulator Spektrum ™ Firma 130A, aluminum oil dampers, waterproof electronics, transmitter Spektrum DX3 ™ 2.4GHz.
Losi® Lasernut U4 Rock Racer in 1:10 scale with 4WD all-wheel drive, has integrated Spektrum ™ Smart technology and is built on the proven TEN design. The model has components made in the metric system, contains Spektrum Smart electronics in the Firma 130A controller and the Spektrum 4P 1900kv 550 motor, which provide higher efficiency and increased performance. The controller is of course waterproof, fully programmable and comes with a cable with IC5 ™ connector. Safe steering is ensured by the DX3 vysí transmitter, the Spektrum AVC® receiver with electronic steering stabilization and the officially licensed U4RC Lasernut body with two different graphic and color variants. An aggressive tread pattern of BFGoodrich tires, it is able to handle any terrain.
The legendary, high-performance TEN platform features a highly durable aluminum chassis and the ability to adapt the independent suspension and drivetrain of the Lasernut U4 RC model model for any terrain. The basis is a lightweight aluminum chassis, to which the individual parts of the drive and electronics are attached. The center of gravity of the car is thus set very low, so you get an advantage over others, especially when cornering. Fully adjustable geometry is a matter of course.
The Spektrum Smart AC 130 Company is waterproof, fully programmable and has an IC5 connector installed for high current loads. The electronics are completely encapsulated in a special potting compound, which prevents the entry of moisture or dirt and is set with buttons that are under the rubber cover. The controller is compatible with 3S-4S LiPol.
The U4RC body, inspired by the Lasernut Licensed Race, is made with an original graphic design, which is produced in two different color variants. for practical use, the body is equipped with a folding cage, for easy access to the battery.
The model is built on licensed Raceline 2.2 racing discs and BFGoodrich KM3 tires with an aggressive tread pattern that can handle any terrain. / p>
The Lasernut U4 has waterproof * components installed, including a receiver, servo control and controller. The controller has an electronics board encapsulated in a special material against moisture, a large active heatsink effectively removes heat from the power components. For details on driving in a humid environment, refer to the operating instructions.
For a comfortable ride, the Lasernut U4 has installed aluminum oil 12mm shock absorbers with coil springs, which have the option of setting and tuning the suspension for specific tracks so that the model can handle even the most demanding terrain.
The chassis consists of a 3mm anodized aluminum chassis plate with a 4mm top plate. On the chassis is installed a realistic cage made of tough plastic with a body and cockpit, in which there are figures of riders. Thanks to this, the model looks very realistic and is indistinguishable from a real car while driving.
The fun doesn't have to stop even when the sun goes down. In the upper part under the roof of the body there is a light strip of twelve LEDs, which has more than enough light for driving at night. In addition, there are two boxes of 4 lights on the sides of the body, which complement the lighting.
For greater adaptability to track conditions and tuning options, adjustable tensioners are installed as standard on the Lasernut U4. / p>
The transverse stabilizer reduces the tilt of the car when cornering and thus increases comfort and allows higher speeds when cornering. When cornering, the stabilizer reduces the difference in compression of the springs on the left and right side - it transfers the load of the suspension of the outer wheel to the inner wheel and thus increases the rigidity of the suspension, reduces the suspension and tilt of the body
Aluminum towers of shock absorbers with a thickness of 4 mm and quality 6061-T6, are designed to withstand extreme loads and shocks from shock absorbers. Holes in the upper part of the tower are available for the possibility of adjusting the position of the dampers.
Front and rear independent axle suspension is a prerequisite for amazing handling and a stable ride, thanks to the ability to respond to unevenness in any place and on any of the wheels. All this contributes to great driving characteristics.
4WDk all-wheel drive ensures great traction, higher performance and handling. The front and rear differentials perform their functions independently for each axle and the center axle responds to changes between front and rear axle drive.
Every bolt or nut, even bearings, have metric dimensions for worldwide use.
Powerful 4-pole AC motor Spektrum ™ Firma® 1900 rpm / V gives the model a speed of up to 80 km / h when powered by a high-quality 4-cell LiPol battery!
The Spectrum ™ DX3 ™ transmitter included in the set offers advanced features such as AVC electronic stabilization sensitivity control, 3-position throttle level adjustment and servo path adjustment.
AVC technology is Horizon Hobby's latest Spectrum innovation in car model receivers. This stabilization system brings a completely new way of driving RC cars. AVC technology uses sensors for steering and throttle corrections. The result is a smoother ride, stable behavior on level ground and in corners, and safer tracking.
* For information on water resistance specifications, refer to the operating instructions. Tips and tricks for operating in a wet environment can be found in the blog.
The package does not include a propulsion battery and charger.
