Losi Tenacity Pro 1:10 4WD RTR Fox Racing

Proven TEN platform

The chassis of the model is built on the proven and time-tested Losi 4WD TEN platform. The base is a lightweight aluminum chassis to which the individual drive parts and electronics are attached. The center of gravity of the car is thus set very low, so you get an advantage over others, especially when cornering. Fully adjustable geometry is a matter of course.

SMART Spectrum Regulator Company 130A

The electronics of the controller is completely encapsulated in a special material that prevents the entry of moisture or dirt into the electronics. When used with a Spektrum Smart battery with an IC5 connector, the controller can receive and transmit battery telemetry data. The large active heatsink efficiently dissipates heat from the power components.

Motor Spectrum ™ Firma® 4P 3150Kv

Powerful 4-pole AC motor Spektrum ™ Firma® 3150 rpm / V gives the model a speed of up to 80 km / h when powered by a high-quality 3-cell LiPol battery!

Waterproof electronics

When driving on a wet track, the controller is treated against moisture, so there is no risk of damage. An electric fan ensures sufficient cooling. For details on driving in a humid environment, refer to the operating instructions.

12 mm racing aluminum shock absorbers

For a comfortable ride, the Tenacity DB Pro has 12mm aluminum oil dampers installed, which have the option of adjusting and tuning the suspension for specific tracks so that the model can handle even the most demanding terrain. / p>

Aluminum chassis

The TENACITY DB Pro chassis consists of a durable 3mm anodized aluminum chassis plate with a 4mm top plate. For greater durability and performance, the chassis is integrated with a realistic cage made of very tough composite material. Therefore, it can handle challenging jumps.

Official Fox Racing and Lucas Oil Trim bodywork licenses

The great mock-up look of Fox Racing and Lucas Oil Trim cars is only possible thanks to the official license, so now you can enjoy this unique opportunity and drive cars of world-famous brands.

LED light bar

The fun doesn't have to stop, even when the sun goes down. TENACITY DB Pro has great lighting thanks to the LED integrated light bar, which provides more than enough lighting for night operation.

Spectrum-Smart technology

Thanks to Smart technology, you will have a perfect overview of the status of your power unit, you will measure the temperature, battery voltage, cell voltage, battery temperature, remaining capacity and engine speed in real time. And without additional sensors! Smart technology ensures that all the electronics in your aircraft model work together seamlessly for maximum efficiency and performance.

AVC Active Vehicle Control technology)

AVC technology is Horizon Hobby's latest Spectrum innovation in car model receivers. This stabilization system brings a completely new way of driving RC cars. AVC technology uses sensors to control steering and throttle at the same time. The result is a smoother ride, stable level and cornering behavior and safer tracking.

Made in the metric system

The entire complete TENACITY-DB model is manufactured in a metric system, including bearings, bolts and nuts.

Model body cage

The body cage forms one unit with the bonnet, which folds back around the pin in the rear. This ensures excellent access to the mechanical and electronic components of the model. The bonus is the light bar above the crew cabin, which is a benefit when driving in the dark.

Telemetry Spectrum ™ DX3 ™

The Spectrum ™ DX3 ™ transmitter offers advanced features such as AVC level control, 3-position throttle control and servo path adjustment. It is equipped with exclusive DSMR® technology for excellent range, response and interference immunity. It is also fully compatible with Smart Telemetry provided by the installed Spektrum Firma ™ Smart 40A control unit and has a convenient LED voltage level indicator for all Spektrum Smart batteries!

Recommended LiPo batteries

The model can be operated on a 2 to 3 cell LiPo battery or a 7 cell NiMH battery. The battery should be equipped with an EC5 or IC5 connector. For normal riding, we recommend a 2-cell LiPo battery (7.4 IN).

• For normal driving LiPo battery Spectrum 7.4 V 5000 mAh with Smart technology, or Spectrum G2 7.4 V 5000 mAh with Smart G2 technology.
• For the maximum possible speed of LiPo battery Black Magic LiPo 11.1 V 5000 mAh.
• For the maximum possible speed of the LiPo battery Spectrum LiPo 11.1 V 5000 mAh with Smart technology, or Spectrum G2 LiPo 11.1 V 5000 mAh with Smart G2 technology.

Spektrum batteries with Smart technology are currently the most modern and safest way to maintain and charge batteries. You can find the advantages of Spektrum Smart technology here.

Smart G2 batteries are even simpler and safer, thanks to the absence of a balance connector. In addition, G2 batteries have up to 3x faster automatic discharge into storage mode. Smart G2 batteries can only be charged on Spektrum Smart and Smart G2 chargers.

Recommended NiMH batteries

NiMH batteries are not difficult to handle and are therefore suitable if the RC model car is operated by children (NiMH batteries will not be destroyed by complete discharge). However, NiMH batteries do not have that much performance.

Recommended chargers for conventional and Smart batteries

Spektrum Smart chargers can charge both Smart and Smart G2 batteries as well as conventional batteries. Previously sold Smart chargers, after the upgrade, also support Smart G2.

• Charger with mains power supply Spektrum Smart S150 with one 1x50W output.
• Mains charger Spektrum Smart S1100 with one 1x100W output.
• Mains charger Spektrum Smart S2100 with two outputs 2x 100 W.

To connect the battery to the above-mentioned chargers, you need an IC5 / IC3 charging adapter / p>

• High-performance mains charger Spektrum Smart G2 charger S1400 1x400W AC with one 400W output.
• High-performance mains charger Spektrum Smart G2 charger S2200 2x200W AC with two 2x200W outputs.

Protective covers for batteries

Protective covers are designed to reduce the risk associated with transporting and charging batteries. LiPo batteries can, while maintaining small dimensions and low weight, provide high discharge currents and have a large capacity. The LiPo battery is prone to mechanical damage and therefore needs to be thoroughly protected.

Accessories for normal operation

For normal operation of RC Losi cars, you need screw glue, quality tire glue, silicone shock absorber oil and a set of screwdrivers. From our range we recommend an affordable set of tools for cars or a quality set of Allen screwdrivers 1.5 / 2.0 / 2.5 / 3.0mm. We recommend that you look at the Tool Kits

The screw glue drips the thread or the head of the screw, which fixes it and the vibrations caused by driving do not allow the screw connection to loosen. The screw adhesive has a special composition that allows the screw connection to be easily loosened with a reasonable torque without damaging the screw head. Never use ordinary instant glue, it could be impossible to loosen a screw glued in this way at all!

The tire glue adheres the tires to the rim of the disc. It is always necessary that the tire is firmly glued to the wheel rim around the entire circumference! If the tire is not stuck around the entire circumference, it may rupture. The tire adhesive has a special composition that is able to bond materials such as rubber or nylon, and at the same time the adhesive is flexible after hardening. Never use ordinary instant glue - it is not flexible after hardening and cracks in the tire would gradually form around the rims!

Occasionally it is necessary to add silicone oil to the model's shock absorbers. During normal operation, there is only a slight leakage of silicone oil along the shock absorber piston rods. If the damper piston rod surface or seal condition is in poor condition, the oil leak may be large. So-called repair kits are supplied for these cases. In the range of tuning parts, piston rods with an extremely hard TiN (titanium nitride) coating are supplied with all shock absorbers. TiN-coated piston rods are easily recognizable by their golden-green color.