Losi Mini-T 2.0 V2 Brushless 1:18 RTR Red

Engine in a central configuration

The Mini-T 2.0 V2 has the engine mounted in the chassis axis in front of the front axle, like its larger TLR 1:10 model. Thanks to this, the model has a more balanced chassis, allowing better performance on different surfaces, as well as balanced steering and better traction.

Aluminum chassis

The Mini-T 2.0 is built on a 1.5mm 6061-T6 aluminum chassis. The aluminum chassis has greater strength, durability and rigidity.

Adjustable oil-filled shock absorbers

The shock absorbers have adjustable rings that allow for easy height and spring preload adjustment. In addition, the damper bodies have an oil fill and two sealing O-rings and rigid shafts.

LiPol Smart G2 50C

The included LiPol battery 7.4V 810mAh 2S Smart G2 50C not only offers high capacity for a long time of operation, but also stores its charging parameters on an integrated microchip. This data is automatically loaded into the included SMART charger when the battery is connected and safe and accurate charging starts immediately. When the Smart Battery is not in use, it also discharges to a safe storage voltage.

Charger LiPo G2 Smart S10 IC2, USB-C

Using the innovative Spektrum Smart technology, the included 2S LiPol battery automatically communicates with the supplied Smart USB charger as soon as you connect it. You don't have to worry about charging settings - everything is done for you. Charging is convenient, safe and easy!

Wheels with discs and tires BK

The "Mini" BK front and rear wheels are modeled after one of the most popular wheels from Team Losi. The tires are true scale models of the 22T tires. The car handles off-road and flat surfaces, the rear tires have a stud pattern for high traction, the front tires have grooves for good traction.

Metal gear wheels

The metal gearbox is designed to handle the enormous power of the Spektrum 6000Kv AC motor. All gears are mounted in ball bearings for smooth and efficient operation.

The Mini-T 2.0 car is fully equipped with ball bearings

The Mini-T 2.0 V2 RC car model is equipped with ball bearings that increase performance by reducing friction in the rotating parts of the drive train. At the same time, the service life and durability of the components will increase.

Protection of electronics and steering servo transmissions

The Mini-T 2.0 V2 is supplied with a flexible member on the shaft of the steering servo output ellipsoid, which dampens wheel shocks. The Servosaver has a multi-layer construction that makes driving safer while ensuring precise steering.

SLT2 2.4GHz RC Kit

In addition to interference-free control, the included Spektrum SLT2 2.4GHz transmitter offers many useful features including steering trim, steering speed and reverse. With the throttle limit switch, beginners can limit speed from 50% to 75% to 100% - ideal for gradually and safely learning handling skills.

Spektrum SR315 receiver

The Spektrum SR315 dual-protocol three-channel receiver provides great range and response thanks to a fixed 2.4GHz connection. It has an extra port for racing transponders and allows upgrading to more powerful Spektrum transmitters without the need for a new receiver.

Smaller brother of the big car 1:10, TLR 22T

In 2003, the very successful Mini-T model was launched, which was based on the XXXT platform. Today's Mini-T 2.0 V2 is based on the current TLR 22T racing car platform and uses the latest experience and technology. Higher performance, new construction, better driving characteristics.

Tuning parts

Optional tuning aluminum parts are produced for the Mini-T 2.0 V2 model, which are more durable and can provide greater rigidity to certain structural groups.

USB source

We recommend a powerful QC 3.0 USB source to power the USB charger. With this source, you can achieve significantly shorter charging times compared to classic 5V USB sources (such as phone chargers).

Recommended batteries

To extend the driving time, we recommend purchasing an additional battery.

• 
  
  
• Spektrum Smart G2 LiPo 7.4V 650mAh 30C HC IC2 battery with Smart G2 technology. (Cannot be charged with the included charger - only with the Smart charger).
  
• Spektrum Smart G2 LiPo 7.4V 810mAh 50C HC IC2 battery with Smart G2 technology. (Cannot be charged with the included charger - only with the Smart charger).
  

Spektrum batteries with Smart technology currently represent the most modern and safest way to maintain and charge batteries. The benefits of Spektrum Smart technology can be found here.

Smart G2 batteries are even simpler and safer, thanks to the absence of a balance connector. In addition, G2 batteries have up to 3x faster automatic discharge into storage mode. Smart G2 batteries can only be charged on Spektrum Smart and Smart G2 chargers.

Recommended chargers

To shorten the charging time, you can use universal chargers with a power of at least 50 W.

Recommended chargers for conventional batteries and Smart G1 batteries (contain classic balance connector):

• 
  
• Dynamite Prophet Sport Single Output 50W Mains Charger + EC2 Banana Charging Cable.
  
• Robitronic Expert LD80 mains charger with one output 80 W + charging cable with EC2 bananas.
  

Recommended chargers for Smart G2 batteries (without balance connector):

• 
  
• USB-C charger Spektrum Smart S100 USB-C with one output up to 100 W (depending on the USB source) + IC2/IC3 reduction.
  
• Spektrum Smart S155 G2 AC mains charger with single output 55 W + IC2/IC3 reduction.
  

Recommended chargers for all types of batteries (conventional and Smart G2):

• 
  
• Spektrum Smart S1100 G2 AC mains charger with single output 100W + IC2/IC3 reduction.
  
• Spektrum Smart S2100 G2 AC mains charger with two 100 W outputs + IC2/IC3 reduction.
  

Accessories for normal operation

For the normal operation of the RC car, you need tire glue, screw glue, a tool kit and silicone shock oil. We recommend an affordable tool kit for RC cars from our range.

Tire glue is used to glue the tires to the disc rim. It is always necessary that the tire is firmly stuck to the wheel rim all the way around! If the tire is not glued all the way around, it may tear. Tire glue has a special composition that is able to glue materials such as rubber or nylon, and at the same time, after hardening, the glue is flexible. We recommend Robitronic Tire Glue from our offer.

Sometimes it is necessary to add silicone oil to the shock absorbers of the model and change the oil in the differentials. During normal operation, there are only slight leaks of silicone oil on the piston rods of the shock absorber. In the event that the surface of the damper pistons or the condition of the seals is in poor condition, the oil leakage may be large. Repair kits or individual parts are supplied for these cases.

For routine maintenance, screw glue is needed. Screws screwed into the metal material (e.g. screws in the motor, worm gear in the pinion) must be secured against loosening with this glue.

Protective covers for accumulators

Protective packaging is intended to limit the risk associated with the transport and charging of accumulators. LiPo accumulators can, while maintaining small dimensions and low weight, provide high discharge currents and have a large capacity for a long driving time. Conversely, the LiPo battery is especially susceptible to mechanical damage.