HoTT Hawk 12 gyro receiver

Graupner Hawk 12 HoTT receiver with 3-axis gyroscope and variometer (6-channel) S1052

With the Hawk 12 receiver, Graupner presents a powerful 6-channel receiver with an integrated 3-axis gyroscope and a particularly vibration-resistant 3-axis acceleration sensor, diversity antennas, vario mode and position mode for fixed-wing models or rescue mode and position mode for helicopters.

Thanks to GRAUPNER HoTT 2.4 GHz technology, the receiver has a safe high-frequency telemetry transmission section with a skip, high-quality components and state-of-the-art software. The receiver transmits the parameters "receiver voltage", "receiver temperature", "signal strength", "height" and "height difference (vario)" to the transmitter without additional sensors. It is also possible to transfer Euler angles to the transmitter and display them there.

Together with the diversity of antennas, the antenna amplifier ensures a huge range. The faster 32-bit L4 processor guarantees energy-saving operation and the higher performance ensures that the Hawk 12 can also be used as an unmanned system for helicopters and as a flight controller for copters. The integrated Hawk gyroscopic system can of course also be perfectly used for fixed-wing models. There are 4 different gyro modes: OFF, normal stabilization, heading lock, rotation rate mode and position mode. When properly set up, the gyroscope's rate of rotation mode allows for knife-edge flight and a twister without steering corrections. Extremely fast, easy and convenient setup via the telemetry menu of the Hott transmitter.

Like its namesake, the hawk, the Hawk 12 is the epitome of determination, power and precision. Hunt for the perfect flight with the Hawk.

Area models

• Model stabilization in difficult windy conditions in up to 3 axes.
• Natural flight behavior thanks to proportional gyro blinding
• The 3-axis gyroscope means that even difficult-to-control aerobatic models can fly very smoothly and acrobatics are extremely easy
• Flight maneuvers can be flown much cleaner
• 4 different gyro modes: OFF, normal stabilization, heading lock, yaw rate mode for particularly easy knife-edge flight and simple twisting, as well as attitude mode
• Simple setting of gyro assignment
• Parameter setting via HoTT telemetry
• Attitude mode software allows for easy landings even in difficult wind conditions
• 5 free mixers
• SUMD output for connection to flybarless systems, flight controllers or power box.
• SUMDIN input for redundant receiver operation.

• Rescue mode and attitude mode for helicopters
• Basic setup is done in minutes via HoTT telemetry.
• Fast and innovative axis assignment for flexible installation direction
• Extremely space-saving thanks to its size, weight and elimination of cables, which makes storage easier
• Special 3-axis sensors of the latest generation resistant to vibrations
• The swashplate pirouette optimization and tail moment direction compensation are detected automatically.
• All common 90/120/135/140 degree and 90 degree 4 servo helicopter swash plates
• Adjustable wing plate rotation up to 90 degrees for multi-blade heads
• Clear standard menu and, if necessary, an optional expert menu
• The sensitivity parameters can also be set during the flight to speed and style depending on the flight phase via the encoder
• Super fast thanks to the elimination of transfer time from the receiver to the flybarless system
• Very direct control feel

• Simple programming of basic settings via telemetry.
• Pirouette optimization is determined automatically from the parameters and works very well.
• Extreme flight stability with full 3D capability even at basic settings.
• The effect for the tail and wing can be easily adjusted via the telemetry menu or with optional encoders.
• Additional optimization options in expert mode for personal flying style and personal requirements.
• Extremely simple adjustment of basic settings via telemetry:
• Direction of rotation of the rotor
• Swing plate type
• Oscillating plate frequency 50...200 Hz
• The direction of the swash plate
• Centers of wing plate servo drives Servo 1...3 (4)
• Set the swing plate cyclic stroke to 8°.
• Swing plate pitch feed A/B
• Limitations of the swash plate
• Rotating the swash plate
• Tail servo center pulse 760 µs, 960 µs, 1.5 ms
• Tail servo frequency 50...333 Hz
• Center position of the tail servo
• Rescue slope
• Expo yes/no
• Record for service purposes or to display the Euler angle
• Expert mode yes/no
• Simple assignment of gyroscope axes
• Gyro effect for tail surface and wing plate via telemetry or adjustable encoders.
• Additional parameters can be set in expert mode.

• Software for Q07 copter with Dshot control protocol can be uploaded via software update.
• Basic setup is done in minutes via the telemetry menu.
• Fast and innovative axis assignment for flexible installation direction
• Special 3-axis sensors of the latest generation resistant to vibrations
• The cover protects the electronics in the event of an impact. The special double-sided adhesive tape also dampens vibrations.
• 8kHz gyro frequency, multishot and fast PID control routines as well as new software filters ensure a perfect flying experience.
• D-Shot with turtle mode.
• Quadrotype XI (X quadcopter with reverse direction of rotation of the propeller), which has proven itself especially in FPV races, so that the lens remains free and the propeller rotates away from the obstacle.
• If the S8437 GPS sensor is connected to the K5/Telemetry and the K5 is set to SENSOR, the following functions are also available: Hold GPS with altitude hold, Come home and Fly waypoints (with HoTT Viewer and USB OTG cable).
• Telemetry support for custom Hott sensors and third-party Hott sensors.
• SUMD output for other flybarless receivers.
• SUMDIN input for redundant receiver operation.
• Voltage input for an external voltage divider, e.g. already included in the S3082 and S3083 controllers.
• Suitable for VN. Input voltage range 3.6...8.4 V.
• Can be programmed and operated with all currently available HoTT transmitters with telemetry.

• Channels: 6
• Approximate dimensions: 36 x 22 x 12 mm
• Weight approximately: 10 g
• Frequency: 2400 ... 2483.5 MHz
• Modulation: 2.4 GHz FHSS
• Range: approx. 4000 m
• Power consumption: 70 mA
• Operating Voltage: 3.7V to 8.4V
• Antenna length: 2x wire 145 (antenna 30) mm
• Temperature range: -15 to +70 °C