EV-Peak C1-XR fast charger 100W - 220V
Express delivery
Large selection of carriers
Satisfaction guarantee
The C1-XR charger was designed with the aim of providing everything needed for charging "under
one roof" including the mains supply. But so that you don't have to carry an extra
gram to the airport, the mains supply is a special separate unit, so the charger itself has pleasant pocket dimensions. C1-XR allows you to charge and discharge all common types of
cells (NiCd, NiMH, Li-poly, Li-ion, Li-Fe, Pb gel), in addition, it is equipped with a built-in
six-channel balancer, which ensures very safe and comfortable charging of lithium
accumulators.
o Input supply voltage 11 - 18 V DC
o For
charging and discharging 1 - 16 NiCd/NiMH cells, 1 - 6 Li-ion/Li-poly/Li-Fe cells or
2-24 V lead-acid batteries
o Adjustable charging current (0.1 A - 10 A)
o
Adjustable discharge current (0.1 A - 2.0 A)
o max. power for charging 100 W,
for discharging 8 W
o Automatic charging and discharging mode for NiCd, NiMH and lithium batteries with adjustable current limit
o Termination of charging using automatic
delta-peak for NiCd and NiMH accumulators
o Lithium and Pb accumulators are charged
by the "constant current/constant voltage" method
o Selectable voltage 3.6/4.1 V (
Li-ion), 3.3/3.6 V (Li-Fe) and 3.7/4.2 V (Li-poly) for individual types of lithium
accumulators
o Adjustable delta-peak detection sensitivity for NiCd and NiMH batteries
o
Repeated cyclic charge/discharge or discharge/charge operation for NiCd and NiMH
batteries with adjustable delay, all values of charged and discharged charges
stored in memory
o Three charging modes for lithium batteries - fast charging,
charging with balancer and storage charging/discharging
o Digital Power
mode - stabilized voltage source 3 - 24 V with electronic current fuse
o
Termination of charging when the set time, supplied charge or limit temperature is exceeded.
o
Socket for temperature sensor
o USB port for data transfer to a PC
o Two-line
blue backlit LCD display with a simple and clear menu and display of parameters
during charging
o A number of warning text messages contribute to safe operation
- wrong input voltage, wrong connection, unsuitable battery or its condition,
incorrect output polarity
o Protection against reverse polarity and short circuit at the output.
o
Compact solid aluminum box, small dimensions
o Network resource as a special
unit.
If you also connect the charging lithium set via the service
connector, you have the possibility to monitor the voltage
on the individual cells during the entire charge or discharge, and the built-in balancer equalizes the voltage on the individual cells.
For
temperature measurement of charged/discharged accumulators, you can also purchase "Temperature sensor
KS-Racing".
Digital Power mode
C1-XR can be used as a stabilized
voltage source (adjustable in the range of 3-24 V) with an adjustable current fuse
(0.1-6.0 A). You can use the charger as a "laboratory voltage source" to power
other devices - if the device's consumption exceeds the set current limit, the source
will turn off with the corresponding error message on the display.
Charger kit includes:
C1-XR charger, AC adapter with cable, 12V power cable with alligator clips, USB
cable, lithium kit service connector adapters (2-6s) for PolyQuest,
JST-XH and ThunderPower systems.
Input voltage (car battery - DC) [V] 11 - 18
Input
voltage (mains - AC) [V] 230
Charging current [A] 0.1 - 10
Discharge current
[A] 0.1 - 2
Number of channels 6
NiCd [art.] 1 - 16
NiMH [art.] 1 - 16
Li-Pol
[art.] 1 - 6
Li-Ion [art.] 1 - 6
Li-Fe [art.] 1 - 6
Balancer Yes
Power
when charging [W] 100
Discharge power [W] 8
Balancer current [mA] 250
Accuracy
balancer [V] 0.01
Termination of delta-peak charging for NiCd and NiMH accumulators
(adjustable
sensitivity 5-20mV/cell)
limit voltage for Li-ion/Li-poly/Li-Fe (4.1/4.2/3.6V
per cell) and lead-acid batteries
Cyclic operation Charge/discharge or discharge/charge,
max. 5 cycles