- -14.58 €
Arrma Notorious 6S V6 BLX 1:8 4WD RTR Black
Express delivery
Large selection of carriers
Satisfaction guarantee
Package contents
The package includes a fully assembled Arrma Notorious 6S BLX RC car model with installed components: Firma™ 150A V2 Smart brushless controller, Firma 4074 2050Kv motor, Spektrum SR315 DSMR receiver, Spektrum S665 18kg MG servo. The package also includes a Spektrum SLT3 2.4GHz transmitter. Accessories: large cross wrench (7/8/10/17 mm), small cross wrench (4/5/5.5/7 mm). Allen key 1.5, 2.0, 2.5 mm, 4x washer 13x16x0.2 mm, shorting jumper IC5, 4x AA batteries for the transmitter. Instructions CZ and manual EN, DE, FR, IT.
Characteristics
The new V6 version of the Arrma Notorious 6S BLX 1:8 scale RC car takes its impressive speed and power to the next level and adds key improvements for durability. Thanks to this, you can perform even better and more daring stunts , the model is perfect for this thanks to its short wheelbase. High-strength EXB (Extreme Bash) parts are installed for unrestrained driving. An extra powerful brushless motor allows the model to reach speeds of up to 96 km/h. Complete electronics with the new Spektrum Firma V2 controller, metal-geared servo and receiver are installed. Excellent driving characteristics on asphalt and off-road are guaranteed by independent suspension and a tuned 4x4 drive with differentials. The body, with a retro look inspired by World War II aircraft, is clipless for quick and easy assembly and disassembly and for clean lines without clips.
The chassis, differentials, front bumper, undercarriage skid plates and even the wing mounts have all been improved and reinforced for greater strength. New side guards prevent dirt from entering, a two-piece strut between the towers adds rigidity to the chassis and simplifies maintenance. The electronics used are waterproof* and you don't have to worry about driving in wet conditions. The V2 controller has modified firmware for even higher performance and faster response. A digital servo with metal gears ensures precise and confident control.
Thanks to the brushless drive being rated for 4-6S LiPo, you can start with a 4S LiPo battery (sold separately) and as your driving skills improve, you can add a 6S LiPo battery (sold separately) to the model and increase power and speed to an extreme 60 mph (96 km/h). Another feature is the ability to limit the throttle on the transmitter to 75% or 50%, making the model suitable for less experienced drivers. This model can do it all – from fast off-road and on solid surfaces, to awesome jumps, backflips and more.
EXB (Extreme Bash) Parts
The new version of this high-performance model brings even greater durability. The chassis, skid plates, differentials or wing mounts and other EXB strength parts add to the model's toughness.
EXB chassis
The Notorious is the perfect model for amazing jumps and crazy rides. With a chassis plate made of high-strength 7075 T6 aluminum and installed on it raised sidewalls to prevent dirt from entering, the model can handle all obstacles, whether in the skatepark or on the race track.
Stapleless bodywork
The 1950s-style body is inspired by World War II fighter planes. The clipless mounting system allows for easy assembly and disassembly. In addition, the clean lines are not guaranteed by clips. The wing bracket, which is the most exposed part, has also been innovated.
Improved differentials
A 29mm EXB limited-slip center differential, along with axle differentials, improves control on slippery surfaces. Durable steel driveshafts are reliable even in rough use.
Oil shock absorbers
The RC model features 16mm oil-filled aluminum shocks that absorb even hard impacts while maintaining maximum contact with the surface for maximum control. The ride height and spring preload can be easily adjusted using a nut.
Tires
Massive super-aggressive dBoots BACKFLIP tires mounted on designer wheels provide high grip whether off-road or on a hard surface.
Stapleless bodywork
Digital servo SPEKTRUM® S665
- Servo SPEKTRUM® S665 with metal gears, 25T milled shaft
- Waterproof*
- Torque 20 kg.cm at 7.4 V, speed 0.12s / 60°
- 11% more torque
SPEKTRUM™ FIRMA™ 150A V2 SMART 3S-6S AC Controller
The model is controlled by a modern SPEKTRUM™ FIRMA™ 150A V2 SMART controller with a 32-bit ARM Cortex M4 microcontroller, which is able to capture complete telemetry and transmit it to the receiver using an integrated wire in the new IC5 connector. Data is transmitted via the SRXL2 protocol. The controller reads information about the type, temperature and voltage of the battery cells directly from the Smart battery. Real-time current, temperature, total battery voltage, cell voltage, battery temperature, remaining capacity and engine speed are available. (Compatible receiver and transmitter required to view telemetry).
The electronics are completely encapsulated in a special potting compound that prevents moisture* or dirt from entering the electronics. The controller is switched on and adjusted using the buttons under the rubber cover.
The upgraded V2 firmware ensures more powerful performance and a confident driving feel.
- The controller contains a fast and powerful 32-bit ARM M4 processor
- The controller is waterproof*
- Overcurrent protection, thermal protection, failsafe
- Automatic LiPol disconnection at low voltage
- Robust plastic housing, aluminum heat sink with fan for high efficiency
- Adjustable high-performance BEC
- High-durability IC5™ connectors, compatible with EC5™ connectors
Powerful engine
- Motor Spektrum Firma 2050Kv 4074
- Power up to 6 LiPo cells
- Aluminum casing with black anodizing and engraved Spektrum logo
- Four-pole design for smooth operation and high torque
- The 5 mm diameter shaft is mounted in ball bearings
- The motor is factory-fitted with 4 mm gold-plated connectors for reliable connection
- The groove at the end of the motor shaft allows for secure mounting of the pinion
Spektrum SR315 DSMR Sport
The SR315 DSMR Sport receiver is a new generation micro receiver weighing just 6g. It features SmartSafe™ or "Gas" Failsafe, and is paired with a push of a button. DSMR technology ensures full range and fast receiver response.
- Box design with rounded corners and light weight
- Thanks to the pairing button, you don't need a pairing connector
- SmartSafe™ Failsafe and "Gas Mode" available when paired
- Secure DSMR modulation protocol and high frame rate of 5.5ms
- Compatible with SMART telemetry, (compatible DMSR transmitter with SPEKTRUM dashboard application)
Spektrum SLT3 transmitter
The Spektrum SLT3 3-channel steering wheel transmitter operates in the 2.4 GHz band and is compatible with the SLT protocol. The Spektrum SLT3 transmitter is lightweight and easy to hold. The steering wheel is covered with a foam rim for a firm grip. The control layout is practical and intuitive - all controls are located so that they are quickly accessible when needed. A secure strap is provided for attachment to a strap.
- Spektrum SLT 3-channel steering wheel RC kit for reliable control
- Proven design for a comfortable, fatigue-free grip
- Options for limiting the maximum control channel deviations
- Throttle and steering trim, throttle and steering reverse
- Engine power limiter 50%, 75% and 100%
- You can use the third channel for additional devices, such as sound modules.
Spectrum SMART technology
Spektrum Smart technology offers more model information, telemetry transmission, easier operation and battery care. All SMART components, including batteries, are able to communicate with each other and transmit telemetry. To view complete telemetry, you must have a compatible Spektrum transmitter with a display. Telemetry display depends on the type of transmitter for a particular model.
More information about Smart technology can be found in our blog . Overview of compatible transmitters here.
Model properties
- Extra fast, powerful and durable 1:8 scale model
- Short wheelbase for stunts and fun driving
- Spektrum™ SLT3™ 2.4 GHz 3-Channel Transmitter
- Spektrum™ SR315 3-channel dual-protocol receiver
- Spektrum™ S665 Digital Servo
- Spektrum™ Firma™ 150A V2 Smart ESC
- Spektrum™ Firma™ 4074 2050 KV Brushless Motor
- EXB high-resistance parts
- EXB chassis made of 7075 T6 aluminum
- Raised sidewalls to prevent dirt from entering
- 29 mm EXB heavy-duty differentials
- 16 mm aluminum oil shock absorbers
- Red anodized two-piece center brace
- Stainless steel bottom skid plate
- Rear wing with Wheelie wheels
- Front and rear shock towers made of black anodized aluminum
- Durable steel drive shafts
- Efficient servo saver with 25T milled shaft
- Easily accessible motor mount for quick motor removal
- dBoots® BACKFLIP tires with universal tread pattern
- IC5® connectors (EC5™ compatible)
*Please refer to the user manual for water resistance specifications. For tips and tricks on wet operation, please visit the blog.
We recommend buying
To operate the model, it is necessary to add a drive battery and an adequate drive battery charger.
Recommended batteries
It is best to use one LiPo drive battery with 4 or 6 cells (14.8, 22.2 V). In this case, short the second input of the Y-cable with the included IC5 jumper, which is already part of the RC car package.
It is also possible to operate the model on a pair of two-cell (7.4 V) or three-cell (11.1 V) LiPo batteries connected in series. In this case, you connect both batteries to the Y-cable that is factory-fitted to the controller. The disadvantage of this solution is that both batteries must be completely identical and equally charged. Therefore, it is more appropriate to use one 4 or 6-cell battery, see above.
- For normal driving, one Spektrum 14.8 V 5000 mAh LiPo battery with Smart technology, or Spektrum G2 14.8 V 5000 mAh with Smart G2 technology. Due to the lower speed, this solution is suitable for children.
- For regular driving with longer operating time, one Spektrum G2 14.8 V 6800 mAh LiPo battery with Smart G2 technology. Due to the limited speed, this solution is suitable for children.
- For maximum speed, power and run time, we recommend one Spektrum G2 22.2V 6800mAh battery with Smart G2 technology.
- For maximum possible speed, we recommend a pair of three-cell Spektrum 11.1 V 5000 mAh batteries with Smart technology, or Spektrum G2 11.1 V 5000 mAh with Smart G2 technology, or the extra powerful Spektrum G2 11.1 V 6800 mAh with Smart G2 technology.
Spektrum batteries with Smart technology are currently the most modern and safest way to maintain and charge batteries. Find out the benefits of Spektrum Smart technology here.
Smart G2 batteries are even simpler and safer, thanks to the absence of a balance connector. G2 batteries also have up to 3x faster automatic discharge to storage mode. Smart G2 batteries can only be charged with Spektrum Smart and Smart G2 chargers.
Recommended chargers for conventional and Smart batteries
Spektrum Smart chargers can charge both Smart and Smart G2 batteries, as well as conventional batteries. Previously sold Smart chargers will also support Smart G2 after an update.
- Spektrum S1100 G2 mains charger with one output 1x 100W.
- Spektrum S1200 G2 mains charger with one output 1x 200W.
- Spektrum S2100 G2 mains charger with two outputs 2x 100 W.
- Spektrum S1400 G2 mains charger with one output 1x 400 W.
Universal transmitter with display
For operating the model, we recommend the Spektrum DX5C or DX5 Rugged universal transmitter as a tuning device, which has the following advantages over the included set transmitter:
- Display for data display and convenient settings
- View complete SMART telemetry provided by the model (depending on model type)
- Precise control mechanics, excellent ergonomics
- Ability to set advanced functions, including exponentials
- Pairing multiple models with one transmitter, memory of individual settings
Accessories for normal operation
For normal operation of RC models you need tire glue, screw glue, a tool kit and silicone oil for shock absorbers. We recommend an affordable tool kit for RC cars from our range.
Tire glue is used to glue tires to the rim of the disc. It is always necessary that the tire is firmly glued to the wheel rim around the entire circumference! If the tire is not glued around the entire circumference, it may burst. Tire glue has a special composition that is able to glue materials such as rubber or nylon and at the same time the glue is flexible after hardening. We recommend Robitronic Tire Glue from our offer - see recommended accessories.
Occasionally, it is necessary to add silicone oil to the model's shock absorbers and change the oil in the differentials. During normal operation, only slight silicone oil leaks occur along the shock absorber piston rods. If the surface of the shock absorber piston rods or the condition of the seals is poor, the oil leak can be large. Repair kits or individual parts are available for these cases. From our range of silicone oils, we recommend TLR (Team Losi Racing) silicone oils, see recommended accessories.
Screw glue is required for routine maintenance. Screws screwed into metal materials (e.g. screws in the motor, set screw in the pinion) must be secured against loosening with this glue.
Protective covers for batteries
Protective packaging is designed to reduce the risk associated with transporting and charging batteries. LiPo batteries, while maintaining small dimensions and low weight, can provide high discharge currents and have a large capacity for long driving times. On the other hand, LiPo batteries are particularly susceptible to mechanical damage.