KAVAN light balsa putty 200ml - white (EN sticker)

Super light modeling putty ready to use on balsa, plywood, polystyrene foam and glass laminate. Easy to apply, dries quickly; it is ground and processed like balsa. Dries without shrinkage; ideal for making fillings and transitions. Compatible with most paints, varnishes and covering foils (if in doubt, test the sealant first on a scrap of material).

White color

Use

• Clean the cemented area with a brush or vacuum cleaner.
• Mix before use. If the putty is too dry, add a few drops of water and mix. Too much water can lead to drying shrinkage.
• Apply the putty using a plastic spatula or spoon. Close the container carefully immediately after use.
• Wash contaminated surfaces, tools and hands with soap and water before the sealant dries.
• After the putty has completely dried, sand it smooth with sandpaper. Avoid inhaling dust when grinding. Always wear a respirator.
• The curing time depends on the thickness of the applied layer. Thin layers (up to 1.5 mm) can be sanded after 15 minutes, let thicker layers dry for 1 hour or longer.
• If the plastered area needs to be reinforced, simply saturate it with thin KAVAN (PRO) instant glue.

Suitable for sealing: balsa, chipboard, plywood, metal, expanded polystyrene, glass and carbon laminates.

Not suitable for sealing: soft and flexible plastics (including EPP and EPO), polyethylene, polypropylene, Teflon, metals.

Storage: in a cool (10°C to 25°C), dry and dark place. Do not expose to temperatures below 10°C.

Shelf life: If the conditions of proper storage are observed, we guarantee the shelf life of the unopened product for 1 year while maintaining the above-mentioned properties.

The product does not contain substances classified as hazardous in the sense of Regulation (EC) No. 1272/2008.