Shopping Cart
There are no more items in your cart
Profimodel Li-Po battery 4200mAh / 7.6V / 150/300C
Ks-E4276
KS-Racing Energy
Express delivery
Large selection of carriers
Satisfaction guarantee
Recommended for you
Last items in stock
Sport
P4 1/12 Ultra LCG Stock Spec GRAPHENE-2 6200mAh Hardcase battery - 3.7V LiPo - 120C/60C
LRP Electronic
L430270
The latest generation of LRP batteries. "GRAPHENE-2" technology means that the batteries are lighter, more durable for storage, with shorter charging times, with higher power with less electrical resistance between cells,
ManiaX LiPo battery pack with 30/60C load capacity, 1-3C charging, max. 5C. Four-cell 4S 14.8V 3300 mAh, dimensions: 135x44x27mm, weight: 330g, XT60 + JST-XH service connector.
Last items in stock
LiPo battery set KAVAN with increased load capacity 40 / 80C, charging up to 2C. Three-cell 3s1p 11,1V 4500 mAh, dimensions: 139x42,5x26mm, weight: 315g, service connector JST-XH.
Top Li-Po battery pack for the most demanding applications, with a high load capacity of 60 / 120C, charging up to 2C. Six-cell 6s1p 22.2 V 1800 mAh, dimensions: 107x34x34 mm, weight: 267 g, service connector JST-XH.
- -1.08 €
Last items in stock
The Spektrum Smart G2 LiPo 7.4V 4000mAh 30C HC IC5 is a new generation of batteries without a balancer connector, with an IC5 data cable. A Spektrum™ Smart charger is required. The integrated microchip stores the unique parameters of each battery....
Last items in stock
- -16.60 €
High voltage Battery in a shatterproof package.
- -16.60 €
High voltage Battery in shatterproof packaging. Bushings G5, balance G2
The KS-Racing brand started working mainly for car models. Over time, she found
her favorites in other branches of modeling as well. Batteries from the KS-Racing brand have proved so successful for us in RC car models that we have decided to expand the range also for modelers of RC airplanes and RC helicopters. We believe you will be completely
satisfied with these batteries!
If you specify in the note, we will be happy to rewire another connector for you free of charge. Connector
is not included in the resoldering price and needs to be added to your shopping cart.
Hard case battery for 1/10 car models, equipped with G4 connectors (4 mm sockets, part
is a reduction with balancer for Dean-t)
Parameters:
Length 95.0mm
Width 47.0mm
Height 19.0mm
Weight
148.0g
(C): 150/300
Recommended first charge 1C. For normal use, a charging current of 2-3C is recommended.
- Varianta
- KS-Racing Energ
17 Items
New
0036089641261
Customers who bought this product also bought:
Last items in stock
Small dual-mode gyro (Normal/AVCS) specially designed for drifting RC cars with S.BUS/S.BUS2 support. Possibility of remote gain control and switching of Normal/AVCS operating mode, setting of deflection limits, gyro response direction, selection of...
Ball bearing of the highest quality. Covered on both sides (metal dust cover on one side and rubberized dust cover on the other side) Bearings are ABEC5
Extremely strong 25T aluminum servo lever with adjustable length in the range of 12-22 mm.
Last items in stock
Reciprocating electric motor with rotating casing for aircraft models: glider 950g, trainer 900g, acro 800g, 3D 700g, KV1500 rpm on V, Lixx 3-4s power supply. Shaft 5.0mm. Alternative designation according to stator dimensions: 2808-1500.
Last items in stock
New electronic AC controller of the XERUN series with built-in BEC circuit and programmable via BlueTooth. Specially developed for 1/10 drifting cars.
- -17.80 €
- Special price
- On sale
Last items in stock
Buggy
Digital
MIBO Drift King Alu Purple Programmable (RWD Drift Spec/33.0kg/8.4V) Brushless Servo
MIBO
MB-2342P
Extra strong programmable digital low profile servo 66g with steel gears and wide supply voltage range 4.8-8.4V, 2xBB, ideal for 1:10 RWD RC drift cars. Thrust 20.0kg.cm, speed 0.11s/60° at 4.8V, thrust 25.0kg.cm, speed 0.09s/60° at 6.0V,
Tap to zoom
