Traxxas Slash 1:10 BL-2s Kit

AC drive BL-2S

The BL-2s AC drive with a 3300rpm/V motor increases speed and acceleration by up to 60% compared to other DC motor drives. Improved efficiency, high-speed ball bearings and an internal cooling fan give the motor long life with minimal maintenance.

Extreme Heavy Duty kit installed

The Factory Installed Extreme Heavy Duty suspension and drivetrain kit is made from the most durable materials Traxxas uses.

Clipless bodywork

The unique system of fixing the body with beaks in the wheel arches, allows quick and easy battery replacement, and the clean look of the model is not disturbed by clips. Unlike traditional posts with clips, the body adheres to the clipless holder with a much larger area and does not crack.

Construction

The chassis is made of nylon, which is filled with glass fibers for greater strength and toughness. The chassis is spatially shaped to have high rigidity. The engine with gearbox and differential is located at the rear of the model. The drive system forms a compact closed unit, which makes the Traxxas Slash RC car model an undemanding model. The long wheelbase and higher ground clearance ensure stability and cross-country ability over time.

Gearbox, adjustable disc clutch and planetary differential

The gearbox, disc clutch and planetary differential are enclosed in one compact unit. A friction clutch transmission reliably transmits engine power to the axles, the Magnum 272™ planetary differential has gears made of hardened steel. This system requires absolutely minimal maintenance. There are pinions and sprockets with different numbers of teeth, so you can fine-tune the model for speed and technical tracks.

Friction clutch

The Revo Spec Torque Control friction clutch ensures smooth power transmission and is adjustable. A properly set amount of slip protects the drive train, while not reducing the acceleration of the model.

Oil dampers

High-lift oil shocks use dual X-rings for perfect sealing and perfect running. Robust design combined with high oil volume can absorb even hard impacts in difficult terrain. You can tune the dampers to your liking by adjusting the springs and changing the viscosity of the oil.

Race-tuned progressive springs are densely wound on the edges and sparsely wound in the center. Despite small bumps, the springs easily compress and keep the wheel in contact with the surface, while the coarser part of the shock absorber works in case of a strong impact.

Adjustable connectors

Adjustable steel wheel suspension connectors enable individual tuning of the suspension geometry and thereby changing driving characteristics for specific conditions. The model thus offers amazing variability!

Front bumper and braces

The integrated front bumper is designed to absorb potential impacts while completing the aggressive mock-up look just like the real car. In addition, Nerf braces are installed on the sides of the chassis to absorb side impacts, providing support to the bodywork.

Wheels and tires

The Slash rides on BFGoodrich wheels, which have excellent off-road grip and allow just the right amount of slip on tarmac. The tires are glued with SCT discs.

Servo steering

Digital Traxxas servo 2075 high-torque waterproof with DC motor and nylon gears has a torque of 9.0 kg.cm and a speed of 0.17 s/60°@ 6.0 V. For water resistance*, the servo box and the output 1000 edges are fitted with seals. Two ball bearings provide very smooth operation.

AC motor 3300kv

The Traxxas 3300kv AC motor provides the ideal affordable drive for 1:10 models with all the benefits of high performance, long life and minimal maintenance. The motor is equipped with a Quick Connect connector for easy connection. Other features include:

• 
  
• Integrated cooling fan
  
• High speed ball bearings
  
• High acceleration
  
• Efficient operation for longer driving time
  

Electronic regulator BL-2S

Waterproof* electronic AC controller BL-2S with three driving modes, support for 2S LiPo batteries and easy control with the EZ-Set™ button. The regulator is equipped with a training mode that limits full throttle to 50%. Thanks to this, novice drivers or children can gradually familiarize themselves with the features of the model and prepare for the full power of the car. Thermal protection, protection against under-discharge of LiPo batteries, gold-plated connectors, simple operation, intuitive signaling with a two-color LED diode and a powerful cooler that can be supplemented with an optional fan (not included in the package).

BL-2S controller modes

• 
  
• Sport : Default mode, forward, braking and reverse are possible.
  
• Race : Mode suitable for racing. Forward and brake is possible; reverse is not available.
  
• Training : Mode suitable for children or novice riders. It is possible to drive forward with power limited to 50%, brake and drive backwards again with power limited to 50%.
  

Traxxas TQ RC Kit

The model is controlled by a two-channel proportional steering wheel RC radio Traxxas TQ, working in the 2.4 GHz band - operation without interference. The transmitter is powered by only 4 AA cells.

There is a rotary knob on the transmitter that trims the steering (so that the model goes straight if the steering wheel is in the center position). The status of the batteries in the transmitter is indicated by an LED. Reverse can be set on the transmitter on the throttle and steering channels.

TQ receiver

The Traxxas TQ 2.4 GHz three-channel receiver ensures safe driving without interruptions. Easy pairing with one button. Status indication by LED diode.

Recommended LiPo batteries:

With modern LiPo batteries, the RC model will have high performance and run for the maximum possible time. The model can be operated on a 2-cell (7.4 V) LiPo battery.

• 
  
• For higher performance Traxxas LiPo battery 7.4 V 5000 mAh
  
• For higher performance and mechanical resistance Traxxas LiPo battery 7.4 V 5200 mAh Hardcase
  
• For higher performance and long driving time Traxxas LiPo battery 7.4 V 5800 mAh
  
• For higher performance and extra long driving time Traxxas LiPo battery 7.4 V 7600 mAh
  

Recommended NiMH batteries:

NiMH batteries do not require precise handling and are therefore suitable if the RC model car is operated by children (NiMH batteries are not destroyed by complete discharge). However, NiMH batteries do not provide such performance.

• 
  
• Traxxas NiMH battery 8.4 V 3000 mAh (high)
  
• For longer driving time Traxxas NiMH battery 8.4 V 5000 mAh (high)
  
• NiMH battery Traxxas 8.4 V 3000 mAh (flat)
  
• For longer driving time Traxxas NiMH battery 8.4 V 5000 mAh (flat)
  

Recommended Traxxas Chargers

Traxxas universal chargers can charge Traxxas LiPo and NiMH batteries. Traxxas chargers are a simple and safe way to charge batteries. Traxxas uses the unique iD system , thanks to which you are always sure to connect everything easily and safely. There is an integrated chip in the battery connector, which the Traxxas charger automatically recognizes and sets all battery charging parameters for you. More information here.

• 
  
• Traxxas EZ-Peak 50W Single Output Mains Charger
  
• Traxxas EZ-Peak 2x50W mains charger with 2 outputs
  

LED lighting

Equip the model with a complete set of LED lighting for a breathtaking ride day and night. Thanks to this lighting, your model will become a real gem. High-luminosity diodes are not only effective, but also provide a strong stream of light. At the same time, the lighting provides a better overview of the model's position.

Carrying bag and backpack

Carry the RC model comfortably and safely in a Traxxas sports bag or backpack. In addition to the main large pocket for the model, there are specially designed side pockets for batteries, charger, tools, etc.

Stand

The aluminum swivel stand will be the perfect addition to your service table or display shelf. The stand facilitates the maintenance of the model and at the same time prevents the deformation (stretching) of the tires during long-term standing.

Work mat

Work mat 91x51cm, for service of RC models and other modeling work. Prevents damage to the workbench, resistant to chemicals. Practical compartments for organizing parts and tools.

Accessories for normal operation

For normal operation of the Traxxas RC car, you need bolt glue, good quality tire glue, silicone shock oil and a set of screwdrivers. We recommend an affordable set of tools for cars from our range.

The thread or head of the screw is dripped with screw glue, which fixes it and the vibrations caused by driving prevent the screw connection from loosening. The screw adhesive has a special composition that allows the screw connection to be easily loosened with an adequate torque without damaging the screw head. Never use ordinary instant glue, it could be impossible to loosen a screw stuck like this!

Tire glue is used to glue the tires to the disc rim. It is always necessary that the tire is firmly stuck to the wheel rim all the way around! If the tire is not glued all the way around, it may tear. Tire glue has a special composition that is able to glue materials such as rubber or nylon, and at the same time, after hardening, the glue is flexible. Never use ordinary instant glue - it is not flexible after hardening and cracks would gradually form in the tire around the rims!

Sometimes it is necessary to add silicone oil to the dampers of the model. During normal operation, there are only slight leaks of silicone oil on the piston rods of the shock absorber. In the event that the surface of the damper pistons or the condition of the seals is in poor condition, the oil leakage may be large. So-called repair kits are supplied for these cases. In the range of tuning parts, piston rods with an extremely hard TiN (titanium nitride) coating are delivered to all shock absorbers. Piston rods with a TiN surface are easily recognized by their golden-green color.