106" Raven DT ARF - Red/Black
Express delivery
Large selection of carriers
Satisfaction guarantee
Sports acrobatic model aircraft for 100-130 cc gasoline engine propulsion for experienced pilots to fly classic precision and extreme 3D aerobatics. The fuselage of the model is a classic construction of plywood and balsa laser-cut parts reinforced with Kevlar® and carbon with a removable laminate engine cover and a removable top. hull with cabin for perfect access to propulsion system and RC equipment. The engine mounts in a rear mount on a plywood box bed; a tunnel is prepared on the lower side of the fuselage for the possible installation of a tuned muffler. The two-part wing with a symmetrical profile (the halves are slid from the side onto the carbon tube coupling and secured with screws) is also a classic construction with an all-balsa rigid coating. Wings with a large area are controlled by 2 pairs of servos. The tail surfaces are light all-balsa construction, the VOP is two-part with stabilizer halves pushed onto a carbon tube. The elevator halves are controlled by servos stored in the horizontal stabilizer with short straight rods. The turn signal is controlled using a cable drive. The whole model is covered with ULTRACOTE® iron-on film (this is the brand name used in the USA for the well-known Oracover® films). The chassis is a spur type with carbon main legs, wheels with laminate covers and a wire spur with a carbon console coupled to the steering wheel. need a 100-130 cc gasoline engine (e.g. GP-123). To control the model, at least a nine-channel computer RC kit is suitable - the possibility of precise setting of "paired" servos and programming of double and exponential deflections in the right size is for flying acrobatics - classic precise and extreme 3D - essential. Servos will do fast and very strong in a standard size - eg Futaba S9177SV, Hitec Hitec HS-7950TH, D980TW or HSB-9381TH and one standard throttle servo. Kit includes: iron-on foil covered fuselage, wing and tail surfaces, sprayed laminate engine cover, accessory kit, carbon chassis, spur, wheels and instructions.
Span [mm] | 2693 |
Length [mm] | 2540 |
Weight [g] | 12250 - 12700 |
Wing area [dm 2 ] | 135.7 |
Controlled functions | S,S(2),V(2),K(4),M |
Difficulty of construction | S2, S3 |
Difficulty of piloting | P4 |