Express delivery
Large selection of carriers
Satisfaction guarantee
The semi-scale model of the French fighter Rafale from FMS with a span of 974 mm is built "around" 80 mm blower with a 12-blade rotor and an AC motor 3280-2100KV, is equipped with a fully mechanized wing with ailerons and flaps and an electric retractable landing gear. The latest "jet" from the FMS workshops made of almost unbreakable EPO foam is suitable for the experience of an advanced pilot who already has experience with small and fast machines, and has a good runway with a solid surface for the model with a retractable landing gear.
The whole model is composed of parts made of EPO foam molded into a negative mold. In the ARF set, you get a model almost finished and equipped with a blower with a diameter of 80 mm with an AC motor C3280-KV2100, a 100 A regulator with a powerful switched BEC and nine digital servos. According to the illustrated pictorial instructions, the construction is very easy, everything is just screwed on, no glue is needed. You mount the duck surfaces, the wing, attach the drawbars, plug in the receiver and insert the propulsion battery - and you're done. The ailerons, flaps, rudder, elevator, duck surfaces, engine speed and retractable landing gear are controlled. The built-in control unit provides elevator mixing, duck control, sequential opening and closing of the door when retracting / extending the chassis, slow extension / retraction of flaps, powering lights, etc., so you do not need a super complex transmitter with lots of mixes, but only control signals for 6 basic functions (ailerons, elevator, throttle, rudder, retractable landing gear, flaps) with the right sense and size of deflections. Piloting is further facilitated by the installed Reflex V2 stabilization unit.
You will need at least a six-channel RC kit with a receiver to control the model. A six-cell Li-poly drive battery 4000-5000 mAh with a load capacity of at least 45C or more will be used for power supply. / p>
The ARF set contains: sprayed moldings of the fuselage, wings and tail surfaces with installed blower with motor, regulator, control and stabilization unit, servos, retractable chassis and functional LED lights and instructions.
Notice
Pursuant to Commission Delegated Regulation (EU) 2019/945 of 12 March 2019 on drones and unmanned system operators from third countries and Commission Implementing Regulation (EU) 2019/947 of 24 May 2019 on the rules and procedures for operations Unmanned aircraft operators and pilots of unmanned aerial vehicles (classic aircraft models, multicopters, drones) that weigh more than 250 g or carry a camera or other sensor capable of capturing personal data are obliged to register (in the Czech Republic with the Civil Aviation Authority) . More information can be found here: Registration of drone operators and pilots
| Span [mm] | 974 |
| Length [mm] | 1409 |
| Wing area [dm 2 ] | 38.5 |
| Weight [g] | 3280 |
| Controlled functions | S, V (2), K (2), M, P (3), F (2), bow leg |
| Construction complexity | S1 |
| Difficulty of piloting | P3 |
Drive and RC equipment:
| Engine | * C3280-KV2100 |
| Regulator | * AC 100A SBEC 5A |
| Blower | * 80 mm |
| Battery | G3 FOXY 22.2 V 5000 mAh |
| Serve | * 7x micro 13g, 2x 9g digital |
| RC kit | min. 6 channels |
| *) Part of the ARF set | |
