- -1.10 €
Climate Draco + Fornax Ready Series RTF
KL-1501
Klima
Models of Klima Draco and Klima Fornax rockets for rocket engines of the A - C and B - D series, respectively. The rockets are assembled and ready for launch. The Draco rocket flies up to a height of
Express delivery
Large selection of carriers
Satisfaction guarantee
Draco and Fornax models for A - C and B - D rocket engines respectively. These high quality models are named after the constellations of the night sky. The rockets are assembled and ready for launch. The Draco rocket flies to a height of up to 370 m, the Fornax model up to a height of 540 m.
The racket is assembled, no dyeing, gluing or modeling is required. The missile just attaches the return system. Being fully assembled, the rocket can take off in minutes.
The electric launch system controller is a pocket-sized device for safely igniting fireworks and model rockets with rocket engines and electric burners. The controller has 5 channels, it connects to the phone via Wi-Fi and the burners can be set to...
Climate Control el. shot off of the Klima missile launch system. LED signaling, 5m long cable with alligator clips. The possibility of placing up to 2 9V batteries for a safe start. A high-quality alkaline battery for high consumption (EM-B1951) is...
Klima ejection seal for rocket motor models. Its purpose is to prevent damage (burnout) of the parachute from hot particles of the engine. The amount of 125 g is enough for about 40 to 50 flights
Klima ejection seal for rocket motor models. Its purpose is to prevent damage (burnout) of the parachute from hot particles of the engine. The amount of 25 g is enough for about 8 to 10 flights.
Klima Launch ramp 3 mm for medium-sized rocket models. The length of the wire is 88 cm, the total height is 1 m. The deflector, all screws and rods are made of stainless steel. The ramp can be quickly folded, the arms are folded together, the pole is...
The altimeter for measuring the flight altitude of the missiles measures up to 3000 meters, 4-digit display measures in metric and inch values, weight 12g, contains an alkaline battery. It measures up
Orientation tool Estes AltiTrak altitude meter is used to measure the achieved height of the rocket. Press the trigger when the rocket reaches its highest height and read the measured value.
Estes AltiTrak Mini altitude gauge is used for approximate measurement of the achieved rocket height. Follow the trajectory of the rocket and release the trigger at its highest point. Based on the mea
For the safe start of rockets to medium size, the Pro Series II ramp is used. Robust base, legs are folding, three-piece rod diameter 6mm, length 1.2 m.
Starting ramp Porta-Pad II for small rockets, steel rod diameter 3mm, usable in dia. guides 5mm. Plastic stand.
Rocket parachute is made of PVC. Complete, dyed, including cords.
The Estes launch packing is an essential part of preparing each launch. It is used to protect the return device from ejection from the engine.
For the safe start of missiles from medium size to PRO Series II missiles, the Pro Series II ramp is used. Robust base, legs are folding, two-piece rod diameter 6mm, length 1520 mm.
Estes - Starting rod 5 mm (3/16 ") for launching larger models of rockets with engines C11, D and E. It can be used for ramps 2215 Porta-Pad II or 2238 Porta-Pad E. Total length 88cm.
Estes - Stickers (water) are an integral accessory of every space rocket model. Complete the look of the rockets exactly according to your ideas with a set of stickers.
Modelcraft cutting mat in size A3 (450x300mm) is made of 3-layer sandwich PVC, in which no cracks or deformation. Non-slip surface allows safe cutting, pad protects
Modelcraft cutting mat in A4 size (300x200mm) is made of 3-layer sandwich PVC, in which there are no cracks or deformations. Non-slip surface for safe cutting, pad protector
Modelcraft modeling knife small size # 1, with blade # 11. Aluminum handle 125mm long. Ideal for working in narrow spaces when working with wood, plastic or paper. Overall length 143mm, diameter 8m
Modelcraft sander with spring for 20 mm wide belt. The package is a medium grain belt. A spring tensioned at the rear keeps the belt in place for easy grinding. Length 135 mm, width 20/35 mm, weight 3
RC Modeller from Deluxe Materials is a universal adhesive of thick consistency suitable for plastics, wood, paper, foils and painted surfaces. It is easily applied to a non-draining surface. After cur
Medium consistency Robitronic cyanoacrylate adhesive. Content 20 ml.