- -0.44 €
This Checkmate Kit
RD-ES7276
Estes
The Estes Checkmate rocket model is for mini-series A rocket engines. Checkmate is a single-stage or two-stage rocket that rises to a height of 274 m! It descends to the ground thanks to the ribbon.
Express delivery
Large selection of carriers
Satisfaction guarantee
The Estes Checkmate model is for the A series of rocket engines. It will fall to the ground thanks to a ribbon.
Difficulty of building a rocket
Building Demanding Rocket 2 models require dyeing, gluing and grinding. Model features laser-cut wood stabilizers, plastic or balsa nose cone, waterproof prints and body ready to assemble. Basic modeling experience is required for the construction. You will spend approximately one day building.
It is necessary to paint the assembled model - we recommend using acrylic spray paints. You can buy spray paints from us or in paint and varnish shops. Information on the construction and launch can be found in this article.
The electric launch system controller is a pocket-sized device for safely igniting fireworks and model rockets with rocket engines and electric burners. The controller has 5 channels, it connects to the phone via Wi-Fi and the burners can be set to...
Climate Control el. shot off of the Klima missile launch system. LED signaling, 5m long cable with alligator clips. The possibility of placing up to 2 9V batteries for a safe start. A high-quality alkaline battery for high consumption (EM-B1951) is...
Klima ejection seal for rocket motor models. Its purpose is to prevent damage (burnout) of the parachute from hot particles of the engine. The amount of 25 g is enough for about 8 to 10 flights.
Klima Launch ramp 3 mm for medium-sized rocket models. The length of the wire is 88 cm, the total height is 1 m. The deflector, all screws and rods are made of stainless steel. The ramp can be quickly folded, the arms are folded together, the pole is...
Klima Streamer (ribbon) serves as a return device for light rocket models, color red, dimensions 50x900 mm.
Orientation tool Estes AltiTrak altitude meter is used to measure the achieved height of the rocket. Press the trigger when the rocket reaches its highest height and read the measured value.
Estes AltiTrak Mini altitude gauge is used for approximate measurement of the achieved rocket height. Follow the trajectory of the rocket and release the trigger at its highest point. Based on the mea
For the safe start of rockets to medium size, the Pro Series II ramp is used. Robust base, legs are folding, three-piece rod diameter 6mm, length 1.2 m.
The Estes launch packing is an essential part of preparing each launch. It is used to protect the return device from ejection from the engine.
Estes - Starting rod 5 mm (3/16 ") for launching larger models of rockets with engines C11, D and E. It can be used for ramps 2215 Porta-Pad II or 2238 Porta-Pad E. Total length 88cm.
Estes - Stickers (water) are an integral accessory of every space rocket model. Complete the look of the rockets exactly according to your ideas with a set of stickers.
Modelcraft cutting mat in A4 size (300x200mm) is made of 3-layer sandwich PVC, in which there are no cracks or deformations. Non-slip surface for safe cutting, pad protector
Modelcraft modeling knife small size # 1, with blade # 11. Aluminum handle 125mm long. Ideal for working in narrow spaces when working with wood, plastic or paper. Overall length 143mm, diameter 8m
Medium consistency Robitronic cyanoacrylate adhesive. Content 20 ml.