Transmitter KAVAN V20 - Blue, 24-channel

KAVAN V20 is an advanced 24-channel RC kit using 2.4GHz simultaneous dual-frequency transmission system with full telemetry support. It boasts a top response of up to 4 ms , at a distance of up to tens of kilometers . You can also choose ACCST D16 or ACCESS transmission systems, also with telemetry. V20 can therefore be paired with a whole range of KAVAN or FrSky receivers , whether telemetric or not, with classic PWM and S.BUS outputs.

The V20 is suitable for both advanced and sport pilots. It is excellent for controlling various models of airplanes or heli/multicopters. You can easily set it up, for example, even for ships or land models. To do this, you will use the wide range of functions and mixes available in the ETHOS™ operating system . You can conveniently adjust them according to your own preferences on the large touch color display .

You have at your disposal a pair of high-precision cross controllers mounted on 10 ball bearings. This guarantees a perfectly smooth movement of the levers in every direction. Their position is detected by high-quality Hall sensors. Compared to potentiometers, they have a higher resolution and are not subject to mechanical wear (most often around the center position), and they better withstand the influence of moisture and dust. The steering is therefore more precise and reliable.

6 three-position switches, 2 two-position (1 momentary) switches, 2 side rotary controls, 6 user-programmable buttons (front) and two momentary buttons (rear) are used to control other functions. The built-in 6-axis gyro sensor can be set to control the gas channel, control the deviations of the mix and is also used to wake up the display. Trim levers and knobs are all metal, precisely machined on CNC .

The body of the transmitter is robust and fits perfectly in the hand . Rubberized grips on the sides and back of the transmitter provide a firm, comfortable and secure grip. From here you can easily reach all the controls. The gimbals are located close to the edges of the transmitter. So you don't even need a counter to comfortably hold the transmitter. Long tuning levers with switches can also be purchased for maximum ergonomics. You can turn the cross controls up to 8° and limit their range of motion to 45-60° . Of course, there is also the option of adjusting the strength of the neutralization springs and arresting. To change the mode, it is enough to select the desired mode in the settings menu, and within a few moments set the throttle lock.

The V20 has memory for up to 64 models expandable with a microSD card. In addition to displaying telemetry data on the display, voice output and vibration feedback are also available. The sound can be transmitted both by cable with a 3.5 mm Jack connector and wirelessly via Bluetooth®. Teacher-student mode is also available via cable or Bluetooth® .

It is powered by a 2S LiPo battery with a capacity of 4000 mAh , which can be charged directly via USB-C. The transmitter is equipped with a balancer (±50 mV) for 2S LiPo batteries, and charges with a current of 2 A at 5 V.

Function

• Color backlit LCD touch screen with a diagonal of 4.3" and a resolution of 800×480 px
• Up to 20 flight modes for perfect control of your model in all conditions
• Full telemetry with data transfer from a wide range of sensors with the option of writing to an SD card
• Memory for 64 models expandable with SD card
• Telemetry voice output via a cable with a 3.5mm Jack clonector or wirelessly via Bluetooth®
• Updatable software
• 6 three-position switches, 2 two-position (1 momentary) switches
• 2 side rotary controls, 2 rear torque buttons
• 6 user programmable buttons (front)
• 6-axis gyro sensor
• Precision cross drivers mounted on 10 ball bearings
• Teacher-pupil mode via cable or wirelessly via Bluetooth®
• F.BUS socket for servo programming
• Model names with 15 characters
• Subtrims
• Reversing the direction of servo deflections
• Setting end points and deflection limits
• Servo speed setting
• Data reset
• Emergency deflections Fail-safe
• Double deflections
• Setting the course of deviations after 2 exponential curves or 21-point curves.
• Freely programmable mixes
• Engine shutdown
• Safe idle
• Logically linked switches
• Clear user menu with customizable widgets
• Servo monitor and servo tester
• Three timers (stopwatch or timer)
• Model operating time
• Transmitter operating time
• Signaling of default controller positions when the transmitter is started
• Adjustable display backlight intensity
• Calibration of cross controllers
• Sound and vibration warning signals
• Range control
• Setting the operation mode with 3 receivers

Technical Specifications:

• Transmission system: 2.4 GHz simultaneous on two frequencies
• Antenna: two built-in antennas
• Dimensions: 215×203×95 mm (H×W×D)
• Weight: 1027 g (including battery)
• Operating system: ETHOS™
• Internal RF module: TW-ISRM
• Number of channels: up to 24
• Operating voltage range: 6.5-8.4V (2S LiPo battery)
• Operating temperature: (-10)-60 °C
• Operating current: 240 mA at 7.4V
• Charging current: ?1 A ± 200 mA
• USB adapter voltage: 5V + 0.2V
• USB adapter current: >2.0A
• Display: Backlit touch LCD with a resolution of 800×480 on a 4.3" diagonal
• Compatibility: Dual 2.4GHz / ACCST D16 / ACCESS

Package contents:

• Transmitter KAVAN V20 blue
• Transport case
• Transmitter battery 2S LiPo 4000 mAh
• Neck strap
• Quick Start Guide