Spectrum Smart LiPo 22.2V 4000mAh 50C IC5

Easy battery status detection

With the Spektrum XBC100, you can easily find out all the battery parameters you need and activate automatic battery discharge.

Easy and safe charging of the Smart Battery

If you connect the Smart LiPo battery to the Smart charger, the charger reads all the necessary parameters (battery type, number of cells, capacity, charging current) directly from the battery. Charging has never been easier!

New IC3 and IC5 connectors

The new IC3 and IC5 connectors have a modern design with an emphasis on safety and simplicity . The contacts are made of gilded pins and cores (in case of IC3 connector with a diameter of 3.5 mm, in case of connector IC5 with a diameter of 5 mm). The connector is also equipped with a data conductor for communication with the charger. When using Smart chargers, it is not necessary to connect the balance connector. Connectors IC3, resp. IC5 is backward compatible with EC3 or EC3 connector. EC5.

As already mentioned, connectors have been designed with an emphasis on safe and easy to use. The connectors cannot be reversed, the contacts and soldered connections are covered with a plastic cover.

To charge the batteries with conventional chargers, the standard JST-XH service connector is routed from the battery.

Automatically puts the battery in storage mode

Long-term storage of the battery in a fully charged state degrades its properties - this is manifested by softening / inflation of the cells. Therefore, Spektrum Smart batteries contain a circuit that after a set time starts to slowly discharge the battery to the so-called storage voltage. The time is adjustable by means of chargers from 12 to 240 hours.

This unique feature greatly extends battery life and ensures better performance over the life of the kit.