Top-quality medium-second (cyanoacrylate) glue with high strength for modeling and general use , specially optimized for gluing RC car tires - especially foam ones . It comes in a bottle with a clog-resistant applicator. The 50g pack is especially convenient for racing RC car pilots with a lot of glue consumption.
Medium second adhesive with medium viscosity is ideal for bonding absorbent and non-absorbent materials that adhere well to each other. Glues wood, most plastics, metals, rubber, glass, ceramics, cork, paper.
Typical method of application: The glue is applied to one of the contact surfaces and the parts are immediately attached to each other, but the glue can also be applied to the joint of well-fitting parts attached to each other.
Properties
- Color: clear
- Viscosity: 801120 mPa·s Density: 1.04-1.06 g/cm3
- Optimum temperature for application: 23 °C
- Curing time (depends on temperature and nature of bonded materials): e.g. nitrile rubber <5 s, stainless steel 15–20 s
- Full curing: 24 h
- Shear strength: 15-25 N/mm2
- Operating temperature range: -10 to +40 °C
- Max. temperature range: -40 to 85 °C
- Optimal gap width between glued parts: zero
- Cured glue is soluble in: acetone, dimethylformamide, acetonitrile
Recommended activator: KAV56.9977 KAVAN PRO activator CA spray 150ml, KAV56.9958 KAVAN Activator CA spray 150ml, KAV56.9959 KAVAN Activator CA spray 200ml
Recommended peeler/debonder: KAV56.9979 KAVAN peeler CA 20g
Removing excess uncured glue: a cloth or paper towel moistened with acetone (if the glued materials can withstand it).
Thinning the glue: If the instant glue thickens, it is a sign that it has already partially polymerized and is losing its original properties - no amount of "thinning" can bring them back. If you need a "thinner" super glue, just use a lower viscosity type. Individual types of KAVAN PRO instant glues can be mixed together to achieve optimal viscosity.
Use as sealant, suitable fillers: microballoon filler KAV56.9980 CA KAVAN filler.
Suitable for bonding: RC car tires, soft and hard wood, chipboard, plywood, metals, ceramics, porcelain, glass and carbon laminates, glass and carbon fabrics and fibers, many plastics (including EPP and EPO).
Not suitable for gluing: polystyrene foam, polyethylene, Teflon, silicone.
Storage: in tightly closed packaging, in a cool, dry and dark place (at a temperature of +2 to +10 °C). Do not expose to temperatures below +2 °C.
Durability: If the conditions of proper storage are observed, we guarantee durability in unopened original packaging for a period of 1 year while maintaining the above-mentioned product properties.
