KAVAN PRO styro instant glue 20g

Top-quality odorless medium-second (alkoxycyanoacrylate) glue with high strength for modeling and general use. It comes in a bottle with a clog-resistant applicator.

Medium second adhesive with medium viscosity is ideal for bonding absorbent and non-absorbent materials that adhere well to each other. Glues wood, most plastics, metals, rubber, glass, ceramics, cork, paper, excellent for gluing polystyrene foam...

Typical method of application: glue is applied to one of the contact surfaces and the parts are immediately attached to each other, but it is also possible to apply the glue to the joint of well-fitting parts attached to each other.

Properties

• Color: clear
• Viscosity: 70-130 mPa.s
• Density: 1.09-1.11 g/cm3
• Optimum temperature for application: 23 °C
• Curing time (depends on the temperature and nature of the bonded materials): e.g. nitrile rubber 10–15 s, stainless steel 40–60 s
• Full curing: 24 h
• Shear strength: 14-20 N/mm2
• Operating temperature range: -10 °C to +40 °C
• Max. temperature range: -40 °C to 85 °C
• Optimal gap width between glued parts: zero
• Cured glue is soluble in: acetone, dimethylformamide, acetonitrile

Recommended activator: for polystyrene foam 5MB15PT-28 ZAP Foam Kicker activator STYRO. For materials resistant to organic solvents KAV9977 KAVAN PRO activator CA spray 150ml

Recommended peeler/debonder: for polystyrene foam - none. For materials resistant to organic solvents KAV9979 KAVAN release agent CA 20g.

Removing excess uncured glue: a cloth or paper towel moistened with acetone (if the glued materials can withstand it).

Thinning the glue: if the instant glue thickens, it is a sign that it has already partially polymerized and is losing its original properties - no amount of "thinning" can bring them back.

Use as sealant, suitable fillers: microballoon filler KAV9980 CA KAVAN filler.

Suitable for gluing: soft and hard wood, chipboard, plywood, metals, ceramics, porcelain, glass and carbon laminates, glass and carbon fabrics and fibers, expanded polystyrene and many other plastics.

Not suitable for gluing: polyethylene, Teflon, silicone.

Storage: in tightly closed packaging, in a cool, dry and dark place (at a temperature of +2 °C to +10 °C). Do not expose to temperatures below +2 °C.

Durability: if the conditions of proper storage are observed, we guarantee durability in unopened original packaging for a period of 1 year while maintaining the above-mentioned product properties.

The product is not classified as dangerous within the meaning of Regulation (EC) No. 1272/2008.