Seven-channel RC kit Absima CR7P 2.4GHz ANT, 2x receiver

Absima CR7P 2.4GHz ANT 7-channel RC kit, 2x receiver
Seven-channel RC mid-range kit working in the 2.4GHz band with new modern ANT data transmission technology with high signal transmission rate. Ability to quickly set all basic necessary parameters needed for comfortable control of your model. The transmitter is equipped with a large clear display for easy setting of the required parameters. Clear intuitive menu. Rich software equipment including freely programmable mix of two arbitrary channels, special functions for control of trial and crawler models with controlled both axles. The R7FS receiver is part of the package. Transmitter power supply 4x AA batteries/accumulators or 2S LiPo. The possibility of setting two-way communication with the receiver - allows, for example, the display of the voltage of the drive battery on the transmitter display. The transmitter also includes a multifunctional stopwatch. In addition to the classic loading of time, these can also count down time and count intermediate times (times of individual laps on the race track) with the subsequent possibility of displaying a list of times of individual laps, total time and average time per lap.

Controls on the transmitter:
steering wheel/gas-brake
2x push button switch
1x three-position rocker switch
1x three-position switch
1x stick proportional controller
1x rotary proportional controller
1x three-axis joystick

Control of any channel or function can be assigned to the individual control elements on the transmitter (except steering wheel and throttle).

Technical parameters Absima CR7P transmitter:

Frequency: 2.4 GHz
Channels: 7
Model Type : Cars, Boats, Land Vehicles
Frequency: 2.4 GHz ISM, Protocol 2.4 GHz ANT
Maximum Power: <20dBm (EIRP) (EU)
Reception sensitivity: ?-99dBm
Resolution channel: 1024
Low voltage warning: YES
Data output: PWM/PPM/i-BUS/S.BUS adjustable
Input power: 4-9 V/DC (Battery: 4x1.5 AA or 2S Lipo with JST/BEC connector
Data input/output type for update: USB-C
Charging connector: NO
Antenna type: Built-in antenna
Display mode 128x64 LCD (DOT matrix screen, backlight) non-touch
Range: ?300 m (on the ground in direct line of sight without obstacles)
Operating current/consumption: approx. 110mA/6V
Temperature working range: -10°C - 60°C
Ambient humidity range: 20-90%
Transmitter dimensions: 136.4x111.8x197.5mm
Weight transmitter: 305g
Absima R7FS receiver technical parameters

Model: R7FS
Frequency: 2.4 GHz
Channels: 7
Waterproof/Waterproof: NO
Frequency: 2.4 GHz ISM RF Standard: ANT
Input power: 3.5-9V DC
Weight: 8g
Size: 35x23.3x13.3mm
Fail Safe: Yes, adjustable from the transmitter
A sensor for measuring voltage is included in the package

The package contains a CR7P transmitter, 2x R7FS receiver, voltage sensor, instructions.