Express delivery
Large selection of carriers
Satisfaction guarantee
Lithium polymer batteries with increased voltage (LiHV) with extremely high load capacity of the ManiaX HV 100/200C series will pump new fresh energy into the lives of your models! Thanks to the advanced technology used in production, they guarantee extremely high current load capacity during discharge and enable fast charging with a long service life.
The ManiaX HV 100/200C series batteries have a standard discharge current of 100C, a peak current of up to 200C and the possibility of fast charging (1-3C). They are designed for extremely demanding applications in aircraft models for classic and 3D aerobatics, blower-powered models and helicopters for classic and 3D aerobatics. High current capacity guarantees maximum use of engine power and allows for a vigorous flying style while maintaining a very good long-term service life.
Do not charge ManiaX HV 100/200C series batteries with a current greater than 5C; for normal operation, we recommend using currents in the range of 1-3C. We recommend using a balancer with each charge. ManiaX HV 100/200C series batteries do not require initial conditioning, but if you intend to charge the sets with a current greater than 1C, we recommend not exceeding 1C for the first three charging cycles. There is no need to discharge them before charging - for example, you can safely charge batteries that are 50% discharged.
The set is supplied in a design designed primarily for powering model airplanes and helicopters. It is equipped with silicone power (charging) cables with a cross-section dimensioned with respect to the expected current load. The service connector is of the standard JST-XH system type - their advantage is small dimensions and weight (which will be especially appreciated by users of small capacity sets), they have simple connection of terminals and they can even be connected directly to the balancer sockets on many KAVAN, SkyRC, GT Power, etc. chargers without using any adapter.
The set includes: ManiaX battery HV 100/200C series, instructions.
| Capacity [mAh] | 2000 |
| Voltage [V] | 22.8 |
| Charging current [A] | 2 - 6 |
| Max. charging current [A] | 10 |
| Discharging current [A] | 200 |
| Max. discharge current [A] | 400 |
| Energy [Wh] | 45.6 |
| Length [mm] | 106 |
| Width [mm] | 34 |
| Height [mm] | 42 |
| Weight [g] | 310 |
