Express delivery
Large selection of carriers
Satisfaction guarantee
The superior quality of this fast-setting, two-component epoxy adhesive ensures extremely fast, clear and strong bonding and repair with a strength of 100 kg / cm2. The adhesive resists moisture, oils, solvents, diluted acids and alkalis. It has a heat resistance of -40 ° C to + 80 ° C. The adhesive is crystalline clear after curing.
SCOPE OF USE:
It is suitable for very fast bonding and repairs of metals, wood, chipboard, thermosets, hard PVC, laminates, ceramics, porcelain, glass, concrete, stone, rubber, expanded polystyrene etc., both with each other and with each other. Not suitable for bonding softened PVC, PP, PE, Teflon and silicone.
INSTRUCTIONS FOR USE:
The bonded parts must be clean, dry and free of grease. Unscrew the caps of both tubes, squeeze the filler and hardener in a 1: 1 ratio (two equal strips) and mix well - the workability of the adhesive is 2 min. Apply the adhesive on one side, on both sides for rough and porous materials, press both surfaces together and fix for 5 minutes (using clamps or tape). Clean and seal tube ends properly. At room temperature the bond strength reaches 5 min. The functional strength reaches the joint after 12 hours. The minimum working temperature is 18 ° C.
Temperature and time dependency table:
Time Strength [kg / cm2]
5 minutes ... 25
10 minutes ... 44
1 hour ... 80
1 month ... 100
The product contains substances classified as dangerous within the meaning of Regulation (EC) No 1272/2008. See the "Download" section for details.
