Humbrol color enamel AA0036 - No 36 Pastel Green - Matt - 14ml

What are email colors good for?
These are quick-drying, solvent-based paints designed specifically for plastic models. However, they can also be used on a number of other surfaces. They are available in matt, semi-matt, glossy and transparent variants and in metallic metallic, but also in an amazing variant of polished metal (the resulting surface differs according to the type of paint used)

Base layer
A wide range of surfaces, including most plastics, wood, glass, ceramics, metal, cardboard, as well as penetrating gypsum or fibreboard and other materials (but always test the paint in advance on a small test area to make sure it is suitable for the material )

Coverage
A 14 ml can covers approximately 0.3 m, of course depending on the thickness of the applied layers.

Use
Apply with a brush directly from the can. When using an airbrush, dilute with a suitable thinner such as Humbrol Enamel Thinners. Two thin layers are better than one thicker. The usual dilution ratio is two to one in favor of the color. Remember that Metalcote paints must be polished after complete drying . Drying time
Glossy: 1-2 hours
Matt and semi-matt: 20-40 minutes dry to the touch, up to 24 hours for complete drying
Metal: completely dry in about 10 days. However, the drying time may vary depending on the ambient temperature and humidity. Next layer: at least after 6 hours (but it is best to let it dry overnight)

Safety instructions
Warning! Flammable liquid and vapor. May cause drowsiness or dizziness. Contains cobalt 2-ethylhexanoate ´ 18%, methyl ethyl ketoxime. May produce an allergic reaction. Keep out of the reach of children. IF SWALLOWED: Rinse mouth. DO NOT induce vomiting. Call a doctor if you feel unwell. Protect from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
Attention! Not suitable for children under 8 years. Children should only use the product under the supervision of an adult. This product is not a toy.