Absima Mini Crawler CR-18 PRO Rock Van 1:18 RTR - Grey

Absima Mini Crawler CR-18 PRO Rock Van 1:18 RTR - Grey

Small expedition model suitable for the office, living room and garden. The PRO version has gantry axles with metal gears and a modified gear ratio. Thanks to these modifications, it has a much better cross-country ability than the standard version. Permanently closed differentials further enhance the already excellent cross-country ability. The chassis is designed the same as large expedition specials 1:10, i.e. metal frame, plus fixed axles suspended on a classic 4-link. The dampers are plastic without oil filling. Metal shock absorbers can be purchased as a tuning part, as well as axle weights or metal cardans. Soft improved tires with great grip and an optimally designed pattern significantly help to overcome any obstacles. Both the steering and the throttle are fully proportional. The model lexan body with many accessories is equipped with LED lighting (front reflectors and rear taillights). The driving time is 35-45 minutes, it depends on the style of driving and the surface on which you drive. Charging the drive battery with the included USB charger takes about 45 minutes.
Newly developed gantry axle with adjusted gear ratio. The result is a smooth response to the throttle at low revs and even more torque. With the new axle, a larger turning angle of the wheels (up to 45°) can also be achieved. The gears in the axles are made of tool steel. CVD drive shafts are installed on the front axle.
Basic properties
- Scale 1:18
- 4WD (four-wheel drive )
- Signal transmission in the 2.4 GHz band (multiple models can be driven at the same time)
- Large gear ratio 104:1
- DC electric motor 55T/030
- Fully enclosed differentials (front and rear)
- Telescopic drive shafts
- Metal main chassis frame
- Drag/Mountain Brake (brake in neutral)
- Digital proportional control for sensitive driving maneuvers
- LED lighting (front and back), controlled from the transmitter
- Beadlock rims with super soft A/T tires
- Waterproof mini servo steering, with a pull of 1kg
- 2-in-1 speed controller/receiver unit
- Driving time: approx. 35-45 minutes (depending on the surface and driving style )

TECHNICAL SPECIFICATIONS:

Large approach angle (43° / 40°)
Controller/receiver: 2in1 ESC/RX, PPX4, 10A/50A
Remote control: 2.4 GHz, 4 channels
Servo steering: pull 1kg, waterproof
Motor: 030/55T DC
Gear ratio: 104:1
Battery: LiPo 7.4V/2S 600mAh
Battery connector: Molex 2-Pin / for charging service, type XH
Wheelbase: 160 mm
Ground clearance: 37 mm
Length: 284 mm
Width: 125 mm
Height: 130 mm
Weight: 400 g
Wheels: 58x20mm


Package contains:
Assembled model, transmitter, drive battery, USB charger, wheel nut wrench, screwdriver, sticker set, manual


4xAAA batteries for the transmitter need to be purchased for operation.
A suitable adapter with a USB output is required to power the USB charger, you can use e.g. a charging adapter from your mobile phone/tablet or you can use a USB output from a PC or laptop, etc.



Many tuning parts can be purchased for the chassis: axle weights, metal shock absorbers, metal central cardans, a set of metal gears, clear unpainted bodywork to create your own design.