Axial SCX24 Ford Bronco 2021 1:24 4WD RTR blue

Rigid metal side panels

Like the Axial SCX10 platform in 1:10 scale, the Axial SCX24 chassis has robust steel rails on the chassis frame and reinforcements that keep the chassis stiff enough even with a large axle twist.

Powerful engine with multi-speed transmission

The RC model of the Axial SCX24 car is powered by a Tazer 180 series DC motor with 88 threads on the armature. The engine has the optimum torque needed to drive up steep inclines. It is mounted on a metal engine bed, which helps the engine cool down and keep the temperature at an optimal level

Worm gears

The front and rear differentials are equipped with worm gears that deliver very high torque to the axles, also ensure brake function and, thanks to their small dimensions, create the greater ground clearance needed to overcome obstacles.

Straight axles

The front and rear axles consist of a two-piece molded composite fixed axle. For optimal handling, the SCX24 ™ suspension is equipped with a three-element front suspension and a four-element rear suspension.

Steel axle shafts

When using worm differential gears, the transmission of torque to the wheels is ensured by steel shafts, which have high resistance and rigidity when engaging the wheels. The torque is transmitted by a pin on the hexagonal hubs.

Grooved drive shafts

The front and rear drive shafts between the transmission and the front and rear axles are splined shafts that allow large axial displacement and maximum torque transmission.

Functional shock absorbers

Even a small RC car can have mock-up shock absorbers with imitation auxiliary tanks. Despite the simple construction with a coil spring and a plastic body, the shock absorbers are perfectly functional.

4-element rear suspension

The rear suspension geometry uses a 4-element design that is optimized to reduce axle steering and torque.

Powerful Axial AS-1 power steering

A key component in expedition RC car models is a sufficiently strong servo steering with a robust mechanism. Directly above the front axle is the Axial AS-1 power steering with servosaver, which allows precise steering while providing protection for the servo gears and electronics in the event of a steering obstacle or a collision with the front wheel.

Equipped with ball bearings

The model is fully equipped with ball bearings, both in the gearbox and in the axles and drives. You can drive without worrying about the wear of the plain bearing.

Ford Wildtrak wheels with Nitto Trail Grappler M / T tires

The officially licensed Wildtrak wheel discs are stamped in black and have stunning model details. Nitto Trail Grappler tires offer a fantastic combination of off-road performance while maintaining excellent road performance.

Folding body

The folding body system offers easy access to the components on the chassis. You can quickly have the battery and chassis available by removing only one body clip and tilting the body up.

Installed LED front lighting

Two bright white LED lights are factory-installed in the front bumper to illuminate the area in front of the vehicle. The headlights on the model can be controlled remotely via a transmitter (3 channels) and have the following functions:

• The lights are on continuously
• The lights are flashing
• The lights are off

New transmitter

The 4-channel Horizon 2.4 GHz transmitter has everything you need for operation. On the transmitter you will find switches for the functions: steering and throttle trim, double steering deflection, pairing, throttle and steering reversal. The 3-channel controller is three-position. The transmitter also includes a mechanical power switch.

There are also three LEDs on the front panel that indicate: transmitter power on, pairing, and battery charge status in the model.

Battery charge signal in the model:

• Green - fully charged
• Yellow - semi-charged battery
• Red - low battery
• Flashing red - low battery

Control unit

The Horizon control unit integrates the controller and the receiver in one. It contains 4-channels and connectors for headlights and turn signals (the function of lights and turn signals is factory-mixed to the third and fourth channels, respectively . remotely via the 4 channel transmitters and should have the following functions: off, flashing of the relevant turn signals when turning in a specific direction, warning lights, fast flashing warning lights.

When finishing the turn signals, it is necessary to choose a suitable resistor, according to the color and type of LED. You can use our online calculator for easy calculation.

Recommended batteries

For more fun and longer operation, we recommend purchasing another battery:

• Replacement LiPo battery 7.4 V 350 mAh

Recommended universal chargers for faster charging

• Charger with mains power supply Spektrum S150 with one 50W output.
• Mains charger Spektrum S1100AC with one 1x100W output.

A charging cable with IC3 battery reduction - JST-PH is required to connect the battery to the charger.

Car socket charger

The Hobbyzone charger 12VDC 2xLiPol 300mA can be used to charge the battery. The charger is designed for connection and power supply from a 12V DC car plug. For power supply from the 230V mains, we recommend the Traxxas 13.8V 3.5A mains supply with car socket.

Accessories for normal operation

For normal operation of the Axial RC car, you need tire glue, bolt glue and a tool kit. From our range we recommend an affordable set of tools for RC cars. Screws in inch units are also used on the model, so we recommend the Medial Pro 1/20 "Allen screwdriver.

The tire glue adheres the tires to the rim of the disc. It is always necessary that the tire is firmly glued to the wheel rim around the entire circumference! If the tire is not stuck around the entire circumference, it may rupture. The tire adhesive has a special composition that is able to bond materials such as rubber or nylon, and at the same time the adhesive is flexible after hardening. We recommend Robitronic Tire Glue from our offer.

Screw glue is required for routine maintenance. Screws screwed into the metal material (eg screws in the motor, pin in the pinion) must be secured against loosening with this adhesive.

Protective covers for batteries

Protective covers are designed to reduce the risk associated with transporting and charging batteries. LiPo batteries can, while maintaining small dimensions and low weight, provide high discharge currents and have a large capacity for long travel times. On the contrary, the LiPo battery is particularly susceptible to mechanical damage.