HBL6625 (0.11s/60°, 10.4kg.cm)

Super strong and fast programmable thin digital mini servo with AC motor and titanium gears mounted on two balls. Thanks to the precise pre-tensioned gears with minimal backlash and the flat 10 mm high box, it is particularly suitable for controlling ailerons and flaps in high-end competition gliders (F3B, F3F, F3J, F5J, etc.) and engine models with thin airfoils/tail surfaces. For perfect cooling even under high load, the servo is housed in an aluminum box with feet for flat mounting.

Increased supply voltage 6.0-7.4 V (nominal).

With the help of the USB programmer/interface for DSP-1 servos and the operating PC program, you can program a whole range of servo parameters:
Dead Band: The width of the dead band indicates the amount of change in the width of the control signal pulses at which the position of the output shaft/servo lever has not yet changed. MKS default setting = 1 µs or 1.1 µs
Lock: Setting the behavior of the servo if it does not receive a control signal - Maintains the position corresponding to the last received signal / The motor is free, the servo does not maintain any position.
Max. Duty (Max. engagement): The degree of engagement of the motor will be limited by this value - it limits the max. output of the servo motor.
Pulse Lower (Min. pulse width): The lower limit of the control pulse width and the corresponding servo deviation size will be limited by this value.
Neutral: Adjusts the width of the control pulses in the neutral/center position of the servo.
Pulse Upper (Max. pulse width): The upper limit of the control pulse width and the corresponding servo deviation size will be limited by this value.
Boost: Engine power when starting from rest. The larger the value, the more force the motor starts.