KONECT 32 kg CORELESS HiVOLT Digital servo (32kg-0.10s / 60 °)
KN-3210HVRX
KONECT
HiVolt Digital servo, metal gears, thrust 25.20 / 32.30 kg / cm at 6.0 / 7.4V, speed 0.12 / 0.10s / 60st at 6.0 / 7.4 V, operating frequency: 1520µs / 330hz, working angle: 120 °, pulse radius: 500-2500µs, weight 59g, Dimensions: 40.5x20.2x36.5 mm.
Express delivery
Large selection of carriers
Satisfaction guarantee
KONECT 32Kg
CORELESS (coreless motor) servo KONECT 32Kg designed for recreational and beginner racers / modellers at speeds up to 0.10s and 32kg / cm of thrust / torque. The servo uses a combined metal and composite housing to achieve lower weight, while the CORELESS (coreless motor) and steel / aluminum gears ensure high performance and durability. The servo is equipped with a JR connector.
Properties
- Ideal for scale 1 / 10,1 / 8 On-Road and Off cars, boats and the like
- 25teeth output shaft
SPECIFICATIONS
- Type: Digital
- Bearing: BB
- Motor type: CORELESS (coreless motor)
- Transmission type: metal
- Transmission material: Steel & aluminum
- Control system: pulse width regulation
- Working frequency: 1520µs / 330hz
- Operating voltage: DC 4.8 - 8.4V
- Operating temperature range: -10 to +50 degrees
- Operating speed (6.0V): 0.12s / 60 degrees without load
- Operating speed (7.4V): 0.10s / 60 degrees without load
- Thrust / Torque (6.0V): 25.20kg.cm
- Thrust / Torque (7.4V): 32.3kg.cm
- Potentiometer drive: direct drive
- Dimensions: 40.5 x 20.2 x 36.5mm
- Weight: 59.0g
Professional servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Distance of the hole from the servo axis: 25mm.
Professional servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Distance of holes from the servo axis: 38mm; 32mm.
Professional servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Distance of holes from the servo axis: 45mm; 38mm; 32mm.
Professional servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Distance of holes from the servo axis: 36mm; 42.5mm; 51mm.
Double arm universal carbon lever for servos 110x22 mm, center hole 8 mm. For screwing onto standard plastic servo discs.
Double arm universal carbon lever for servos 60x22.5 mm, center hole 7 mm. For screwing onto standard plastic servo discs.
Single-arm universal carbon lever for servos 40x21 mm, center hole 9 mm. For screwing onto standard plastic servo discs.
Single arm universal arc carbon lever for servos 53x20mm, center hole 9mm. For screwing onto standard plastic servo discs.
Double arm universal arc carbon lever for servos 110x31 mm, center hole 9 mm. For screwing onto standard plastic servo discs.
Professional double-sided servo lever with offset for servos with 25-tooth output hexagon (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Hole spacing: 114mm; 102mm; 89mm; 76.5mm; 63.5mm
Professional double-sided servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Hole spacing: 64mm; 50mm; 38mm.
Professional double-sided servo lever for servos with 25-tooth output thousand (Hitec Dxxx / HS-8xxx / HSB-9xxx, Savöx and Futaba). Made of aluminum with M3 threads for the use of ball joints. Hole spacing: 89mm; 76.5mm; 63.5mm.