COMBO BRUSHLESS 80Amp SCT WP with 4P 3660SL 2750Kv motor + programming card

Alternating COMBO for 1/10 off-road chassis Buggy, Truggy, Short Course, Monster Truck

Konect & HobbyWing are your reliable partner for the maximum performance of your RC CHASSIS.

The controller with 80A continuous load is waterproof and has a switched BEC, which provides 6V / 7.4 with a 3A / 5A power supply. This means that Hi-Volt servos with high torque and high current can also be operated without problems.
Equipped with DEAN / T connectors, batteries can be connected to the AC controller without additional adapters. High-quality 4mm / G4 gold connectors are also ready for the Motor and can be connected immediately. This means that the system is immediately ready for use without further soldering work, ie Plug & Play.

The Konect WP80SL controller can be easily programmed with a separate programming connection and programming card (optional) without having to disconnect the existing connection in the vehicle in advance. In this way, the numerous functions of the AC controller can be adapted to your own needs in an instant and without major complications. Alternatively, of course, it can also be programmed using the built-in setting button on the switch.
Last but not least, the controller also has a number of safety systems to protect the electronics, such as LiPo batteries, RC kit, controls and servos, from damage due to, for example, polarity reversal, overheating, short circuit or undervoltage.

FEATURES

This electronic AC speed controller is ideal for 1/10 scale vehicles when it comes to off-road or other events. Whether it's a Buggy, Short Course, Stadium Truck or Truggy with the Konect WP80SL controller (manufactured by the HobbyWing market leader) you will have maximum driving fun, Mega performance and zero problems.

• Waterproof and dustproof regulator
• Powerful 6V / 7.4V BEC with 3A / 5A
• Dual port for connecting a fan or programming card
• Power switch including a separate button for setting
• Proportional brake with 9 different programs for max. Braking force and brake (automatic braking force in idling / neutral position)
• The maximum braking force can be set in 5 different modes from 25% to 100% or switched off completely.
• 9 adjustable acceleration / punsh curves from soft to Mega aggressive acceleration
• Reverse can be deactivated
• The motor direction can be programmed on the controller
• In LiPo mode, the lower voltage limit can be set almost continuously from 2.6 V / cell to 3.4 V / cell. This can also be completely deactivated if necessary
• It is also possible to set two thermal overload values (105 ° C and 125 ° C)
• completely ready for connection for battery and motor (Plug & Play) soldering is not necessary

Technical data of the controller

• Constant current: 80A
• Peak current: 520A
• Input voltage: 2-3S LiPo battery, 6-9 NiMH / NiCd battery
• BEC output power: 6V / 7.4V with 3A / 5A
• Internal resistance: 0.001 Ohm
• Motor limits: all 3000Kv - 5400Kv (without sensor) sizes from size 3650 to 3660.
• Type: Without sensor system
• Connector system:
• Battery side: T / DYN for connecting two LiPo
• Regulator / Motor: 4mm / G4 gold connectors
• Receiver: JR / Graupner connector
• Dimensions approx .: 49.5 x 39.5 x 34.7 mm with fan
• Weight: approx. 102 g

Do you want more? Then you will be very satisfied with this sensorless, high-performance-oriented motor. Manufactured and developed in collaboration with the HobbyWing Motor, it is available in a CNC milled aluminum housing that contains a perfectly matched and precisely balanced rotor. If necessary, the housing can be easily removed and offers, for example, the possibility to clean ball bearings or perform other maintenance work. Thanks to this maintenance option, you get maximum performance and, above all, a very long service life. This motor should be your first choice to replace a standard motor with a powerful and reliable AC motor.

Konect & HobbyWing are your reliable partner for the maximum performance of your RC chassis.

FEATURES:

This AC motor is ideal for almost all 1/10 vehicles, whether off-road or on the road, whether it's a Buggy, Short Course, Monster Truck, Stadium Truck or Truggy. With the 3660SL engine from Konect, you will have maximum driving pleasure, Mega performance and zero problems.

• 4-pole AC motor in 3660SL design
• orange anodized cover and sophisticated design in laser optics
• high torque and fast response
• 4mm / G4 connector for quick connection without soldering (plug & play)
• flexible connection cable for easy installation in the chassis
• Motor shaft with a diameter of 5.00 mm made of high-strength and polished steel
• Max. smooth running and long service life thanks to precise ball bearings
• CNC machined and removable motor housing
• extremely Cool DESIGN that will please every EYE
• Aluminum motor cover for optimal cooling and heat dissipation
• double insulated motor winding made of pure copper

• Motor shaft: 5.00 mm (diameter) / 15 mm (length)
• Engine speed KV: 2700 (Rpm / V)
• Number of LiPo cells: 2-3S
• number of poles: 4
• type: Sensorless
• Connector system: 4mm / G4 gold connector
• Engine length: 60 mm
• Engine diameter: 36 mm (external)
• Weight: approx. 258 g

• 1/10 Monster Truck
• 1/10 Truggy & Trucks
• 1/10 4WD buggy
• 1/10 2WD b uggy
• 1/10 Short Course
• 1/10 Desert Truck