Rogue Buggy 3S BRUSHLESS RTR 4wd - orange
1.ROGB.OR.RTR
HOBBYTECH
1/8 4WD buggy with AC motor for beginners that excels in durability, handling and cross-country ability. Set including electronics, without drive accumulator.
![](/modules/blockreassurance/views/img/img_perso/Ikona_Balíček do 48 hodin.png)
Express delivery
![](/modules/blockreassurance/views/img/img_perso/Ikona_Doprava zdarma.png)
Large selection of carriers
![](/modules/blockreassurance/views/img/img_perso/Ikona_spokojení zákazníci.png)
Satisfaction guarantee
Hobbytech is completely abandoning the use of DC motors and from now on will only offer cars equipped with AC motors at DC prices.
This buggy has an all-wheel drive drivetrain, Konect by Hobbywing electronics and is equipped with large volume all-aluminum shock absorbers.
Body design was entrusted to Bitty Design. The body is available in yellow and orange.
It is a durable and easy-to-drive car for beginners on all types of terrain and on all circuits.
Specifications:
- Maxi Cross Buggy all-terrain tires
- Durable weights and semi-axles
- Waterproof box for the receiver
- 7kg KONECT servo steering with metal gears
- Impact-resistant reinforced chassis tub
- AC motor KONECT 2200KV fitted with a fan
- KONECT 60Amp Waterproof Controller (Supports LiPo 2S and 3S)
- 1/8 Big Bore Aluminum Shocks
Dimensions:
- Maximum height 215 mm
- Length: 490 mm
- Wheelbase: 329 mm
- Front wheel track: 300 mm
- Rear wheel track: 310 mm
- Ground clearance at the front: 48 mm
- Rear clearance: 50 mm
- Total weight: 2330 g
Bag dimensions 47 x 35 x 11 cm.
Set of 4 bits for electric screwdrivers, made of hard steel with a titanium finish. Includes 1.5mm, 2.0mm, 5.5mm and 7.0mm bit for 6.35mm hex adapter.
All-aluminum oil shock absorbers for 1/8 models and similar, Total length between pins is 95mm, piston diameter is 16mm. The set includes: three pairs of springs: soft, medium and hard; upper and lower fastening material.
Digital servo, metal gears, thrust 6.50/7.50 kg/cm at 4.8/6.0V, speed 0.13/0.11s/60st at 4.8/6.0V, working frequency: 1520µs/330hz, working angle: 120°, pulse radius: 500-2500µs, weight 55g, Dimensions: 40.5x20.2 x27.7/38.0mm.
module 32DP
Steel motor pinion 12 teeth, 32DP module with 5mm bore and 3.17mm adapter
KONECT
KN-183212
Digital servo, metal gears, thrust 15.60/18.20 kg/cm at 4.8/6.0V, speed 0.15/0.13s/60st at 4.8/6.0V, working frequency: 1520µs /330hz, working angle: 120°, pulse radius: 500-2500µs, weight 55g, Dimensions: 40.5x20.2x27.7/38.0mm.
High speed fan 30mm - 6-8.4V - double mounted in ball bearings - BEC / JR connector.
Hobby
ANTIX by LRP 3100mAh - 7.4V - 50C LiPo Car Stickpack Hardcase - XT60 connector
ANTIX
L430413XT60
with XT60 connector, capacity 3100mAh, 50C discharge current (short-term 60C), balance connectors XH-2S, voltage 7.4V / 2S, length: 134mm, width: 45.0mm, height: 24mm, weight: 193-195g.
Hobby
ANTIX by LRP 4100mAh - 7.4V - 50C LiPo Car Stickpack Hardcase - XT60 connector
ANTIX
L430414XT60
with XT60 connector, capacity 4100mAh, 50C discharge current (short-term 60C), balance connectors XH-2S, voltage 7.4V / 2S, length: 134mm, width: 45.0mm, height: 24mm, weight: 233-234g.
Hobby
ANTIX by LRP 5900mAh - 7.4V - 50C LiPo Car Stickpack Hardcase - XT60 connector
ANTIX
L430421XT60
with XT60 connector, capacity 5900mAh, 50C discharge current (short-term 60C), balance connectors XH-2S, voltage 7.4V / 2S, length: 138mm, width: 46.0mm, height: 25mm, weight: 310g.
3S LiPo battery with XT60 connector, capacity 5300mAh, voltage 11.1V, 40C discharge current (short-term 80C), JST-XH balance connector, dimensions 138.6 x 46.6 x 30 mm, weight 386 g.
2S LiPo battery with XT60 connector, capacity 5300mAh, voltage 7.4V, 40C discharge current (short-term 80C), JST-XH balance connector, dimensions 139 x 47 x 25.4 mm, weight 273 g.
with XT-60 connector, capacity 7200mAh, 60C discharge current (short-term 120C), voltage 11.1V/3S, length: 153mm, width: 45.5mm, height: 28.0mm, weight: 415g
with XT60 connector, capacity 3100mAh, 50C discharge current (short-term 60C), balance connectors XH-2S, voltage 7.4V / 2S, length: 134mm, width: 45.0mm, height: 24mm, weight: 193-195g.
with XT60 connector, capacity 4100mAh, 50C discharge current (short-term 60C), balance connectors XH-2S, voltage 7.4V / 2S, length: 134mm, width: 45.0mm, height: 24mm, weight: 233-234g.
Programmable waterproof sensorless AC combo for car models. For 2S - 3S LiPo power supply, XT60 connector.
Programmable waterproof sensorless AC combo for car models. For 2S - 3S LiPo power supply, XT60 connector.
Programmable waterproof sensorless AC combo for car models. For 2S - 3S LiPo power supply, XT60 connector.
Programmable waterproof sensorless AC combo for car models. For 2S - 3S LiPo power supply, XT60 connector.
Programmable waterproof sensorless AC combo for car models. For 2S - 3S LiPo power supply, XT60 connector.
Programmable waterproof sensorless AC regulator for car models. For powering 2S - 3S LiPo, XT60 connector.