Sector Pro-Line body, light, clear: AE B7

Characteristics

Pro-Line body Sector, light, clear for Buggy AE B7. This range of 1:10 buggy racing bodies features a redesigned design that optimizes the handling of your buggy in the toughest track conditions. Part of the Sector bodywork is a 118mm Air Force wing for the perfect combination of downforce and low drag.

The Sector buggy 1:10 range of racing bodies has an optimized construction, which improves the handling of your buggy in the most difficult conditions on the track. The low-slung body position features a tapered windshield and a long center fin for ideal stability and lateral engagement, reducing lap times. The overall body rake contributes to a better handling Sector-bodied car, with the body having plenty of clearance around the transmission, chassis and bulkhead.

Part of the Sector bodywork is a 118mm Air Force wing. The wing shape is designed for the perfect combination of downforce and low drag with built-in durability and tunability. There is ample rear wheel clearance at the outer edges of the wing along with 2 diagonal ribs for wing stiffness at high speeds The trailing edge of the wing has 3 trailing chord trim heights to suit your specific track conditions. The body contains 2 pressure wings, made of ultra-resistant material with a thickness of 1 mm.

We recommend to buy

To finish, you need to paint the bodywork. Lexan bodies are always delivered as a semi-finished product, intended for carving and painting. First of all, you need to cut out the body nicely, to make the holes for the wheels as round as possible, bent lexan scissors will help you. For flat surfaces, we also offer lexan straight scissors.
When choosing colors for the polycarbonate bodywork, you need to be careful to buy a real spray for lexan, e.g. H-SPEED Spray for lexan 150ml white, it has a special composition so that it sticks to the bodywork, the colors are then flexible and resistant to peeling and cracking even with the biggest impact.
Before painting, the body must be thoroughly degreased, most manufacturers recommend washing the body with spring water. After degreasing, use masking tape from the inside of the bodywork, e.g. masking tape 24mm to create the design of your choice or apply the masking stickers supplied by the manufacturer.
It is important to know that lexan bodies are painted from the inside, which makes the body resistant to abrasion. Varnishing should take place best in rooms with room temperature. Individual colors are applied in at least three layers, it is important to apply the color from a sufficient distance, at least 15-20 cm.