E-flite T-28 Trojan 1.2m Smart PNP

SMART technology

The T-28 Trojan 1.2m is equipped with the exclusive Spektrum-Avian-Smart Lite controller, which can provide a range of telemetry data related to the power system in real time, including engine speed, current, battery voltage and more - with or without Smart. batteries - via compatible Spektrum telemetry receivers and transmitters equipped with Spektrum AirWare včetně (including DX6e and 8e, DX6 G2 / 3 and 8 G2, DX9, NX6, 8 and 10, iX12, iX20 and others) in flight.

High performance

The installed power unit contains a specially tuned powerful 850Kv AC motor and 70A Spectrum-Avian-Smart Lite regulator and a 3-blade propeller, which has excessive thrust with 3S LiPol battery or higher speed and almost unlimited vertical power with 4S LiPol battery, without the need any adjustments or settings.

Mock-up details

The model is made of tough and durable Z-Foam material with a number of mock-up elements, ready-made color, equipped cabin with cockpit and pilot figure, engine mock-up, retractable landing gear covers, engraving panels, etc. The model traditionally has excellent flight characteristics and easy preparation for flight.

Functional chassis and flaps

The big advantage is the installation of an electric 3-point retractable landing gear, which has a controlled bow leg, as well as installed flaps. These will reduce both take-off and landing speeds and increase flight comfort.

Battery access

After removing the fuselage cover, you have a clear arrangement of electronics in the fuselage. You can conveniently replace the flight battery and you are ready to take off again in no time.

Electric retractable chassis

An E-flite electric retractable landing gear class 15 with a main leg retraction angle of 90 ° and a bow with suspension is installed. The main wheels with wheels are covered with covers that cover the shafts in the wing.

Recommended transmitters Spectrum

We recommend modern SPEKTRUM programmable transmitters for pairing the BNF version model:

• DX Spectrum DX6e DSMX 6-channel telemetry transmitter, 250 models in memory .
• 6-channel transmitter of the NX Spectrum NX6 DSMX series with the latest trends, Smart Technology compatibility, USB port and WiFi connection options .
• 8-channel NX series transmitter Spectrum NX8 DSMX with the latest trends, Smart Technology compatibility, USB port and WiFi connectivity .

Recommended batteries

We recommend a 3-cell (11.1 V) LiPol drive battery to power the model.

• For economical flying LiPo battery Black Magic LiPol 11.1V 2200mAh 25C with EC3 connector.
• Smart LiPo battery Spectrum Smart LiPo 11.1V 2200mAh 30C IC3 with Smart technology
• For longer flight time LiPo battery Spectrum Smart LiPo 11.1V 3200mAh 30C IC3 with Smart technology

Spektrum batteries with Smart technology are currently the most modern and safest way to maintain and charge batteries. You can find the advantages of Spektrum Smart technology here.

Recommended chargers for conventional LiPol and Smart batteries

If you decide to use modern Smart LiPo batteries in RC models of planes or helicopters, or to charge your batteries from other manufacturers, then we recommend the following chargers:

• Charger with mains power supply Spektrum S150 with one 50W output.
• Charger with mains power supply Spektrum S1100AC with one output 1x100W .
• Charger with mains power supply Spektrum S2100 with two outputs 2x 100W .

Recommended modern powerful chargers for Smart batteries

• High performance AC charger Spektrum Smart G2 charger S1400 1x400W AC with one output 400W .
• High performance AC charger Spektrum Smart G2 charger S2200 2x200W AC with two outputs 2x200W .

There is a reduction for charging IC5 / IC3 Spectrum conversion cable IC5 device - IC3 battery 10cm 10 AWG.

Recommended chargers for conventional LiPo batteries

If you decide to run the model on conventional LiPo batteries , we recommend using universal chargers with a power of at least 50 W.

Dynamite Prophet Sport charger with two 50 W outputs

Accessories for normal operation

For normal operation of flying RC models, you need suitable adhesives, a set of tools and a case for storing LiPol batteries. From our range we recommend a quality set of Allen screwdrivers 1.5 / 2.0 / 2.5 / 3.0mm and Modelcraft Phillips screwdrivers (set of 6). The Modelcraft mini pliers in a case (set) and a Modelcraft cutting knife with an A6 washer will certainly be suitable for assembly.

For quick repair of aircraft models, we recommend the fast-curing 4-minute Epoxy adhesive. From our offer we recommend Speed Epoxy 4 min. 71g

Protective covers for batteries

Protective covers are designed to reduce the risk associated with transporting and charging batteries. LiPo batteries can, while maintaining small dimensions and low weight, provide high discharge currents and have a large capacity. The LiPo battery is prone to mechanical damage and therefore needs to be thoroughly protected.