Express delivery
Large selection of carriers
Satisfaction guarantee
The package contains finished parts of the aircraft model T-28 Trojan 1.2ms with installed electronics: E-flite AC motor BL15 850rpm, Spektrum Smart AC regulator Avian Lite 70A 3-6S IC3, 7 pcs Spektrum servo A330 9g, Spectrum receiver AR631 6CH AS3X / SAFE, E-flite retractable chassis electro cl. 15 bow, E-flite retractable chassis electro cl. 15 main 90 °. multilingual manual in English, German, French and Italian and instructions in Czech.
The T-28 Trojan with a span of 1.2 m is fully equipped with electronics. The power system is compatible with LiPol 3S and 4S batteries and includes an 850K AC motor and a 70A Smart Lite controller, making it capable of sport flying in the hands of intermediate pilots or flying at higher speeds and performing higher energy acrobatics in the hands of experienced pilots. The BNF® Basic version includes an AR631 telemetry receiver with AS3X® technology and optional SAFE® Select technology, which can be flown by even less experienced pilots.
With a compatible AR631 receiver and SMART or other batteries, the Smart Lite controller can provide a range of real-time power system telemetry data, including motor speed, current, battery voltage, and more, to compatible Spektrum transmitters equipped with Spektrum AirWare ™.
The model is made of durable EPO material, the surface has a number of mock-up details, including panel lines, dashboard and pilot figures, and is also finished in production in an iconic red and white color with a drawing on the bow and camouflage pattern. An electric 3-wheel retractable landing gear is installed, including landing gear covers, a mock-up 3-blade propeller with a cone and flaps.
The T-28 Trojan 1.2m is equipped with the exclusive Spektrum-Avian-Smart Lite controller, which can provide a range of telemetry data related to the power system in real time, including engine speed, current, battery voltage and more - with or without Smart. batteries - via compatible receivers (including AR631) and transmitters equipped with Spectrum AirWare včetně (including DX6e and 8e, DX6 G2 / 3 and 8 G2, DX9, NX6, 8 and 10, iX12, iX20 and others) in flight.
The installed power unit contains a specially tuned powerful 850Kv AC motor and 70A Spectrum-Avian-Smart Lite regulator and a 3-blade propeller, which has excessive thrust with 3S LiPol battery or higher speed and almost unlimited vertical power with 4S LiPol battery, without the need any adjustments or settings.
The model is made of tough and durable Z-Foam material with a number of mock-up elements, ready-made color, equipped cabin with cockpit and pilot figure, engine mock-up, retractable landing gear covers, engraving panels, etc. The model traditionally has excellent flight characteristics and easy preparation for flight.
The big advantage is the installation of an electric 3-point retractable landing gear, which has a controlled bow leg, as well as installed flaps. These will reduce both take-off and landing speeds and increase flight comfort.
After removing the fuselage cover, you have a clear arrangement of electronics in the fuselage. You can conveniently replace the flight battery and you are ready to take off again in no time.
An E-flite electric retractable landing gear class 15 with a main leg retraction angle of 90 ° and a bow with suspension is installed. The main corners are covered with covers that cover the shafts in the wing.
We recommend adding min. 6-channel Spektrum DSMX / DSM2 transmitter, 3P and 4S 2200–3200mAh LiPol battery and charger.
We recommend modern SPEKTRUM programmable transmitters for pairing the BNF version model:
We recommend a 3-cell (11.1 V) LiPol drive battery to power the model.
Spektrum batteries with Smart technology are currently the most modern and safest way to maintain and charge batteries. You can find the advantages of Spektrum Smart technology here.
If you decide to use modern Smart LiPo batteries in RC models of planes or helicopters, or to charge your batteries from other manufacturers, then we recommend the following chargers:
There is a reduction for charging IC5 / IC3 Spectrum conversion cable IC5 device - IC3 battery 10cm 10 AWG.
If you decide to run the model on conventional LiPo batteries , we recommend using universal chargers with a power of at least 50 W.
Dynamite Prophet Sport charger with two 50 W outputs
For normal operation of flying RC models, you need suitable adhesives, a set of tools and a case for storing LiPol batteries. From our range we recommend a quality set of Allen screwdrivers 1.5 / 2.0 / 2.5 / 3.0mm and Modelcraft Phillips screwdrivers (set of 6). The Modelcraft mini pliers in a case (set) and a Modelcraft cutting knife with an A6 washer will certainly be suitable for assembly.
For quick repair of aircraft models, we recommend the fast-curing 4-minute Epoxy adhesive. From our offer we recommend Speed Epoxy 4 min. 71g
Protective covers are designed to reduce the risk associated with transporting and charging batteries. LiPo batteries can, while maintaining small dimensions and low weight, provide high discharge currents and have a large capacity. The LiPo battery is prone to mechanical damage and therefore needs to be thoroughly protected.
