E-flite Night Radian 2.0m SAFE BNF Basic

AS3X ™ stabilization

The Spektrum receiver is equipped with AS3X technology, which helps stabilize the model in flight. The receiver contains a triaxial MEMS gyro and an accelerometer, and thanks to electronic stabilization, the control of the model is simplified, eg in windy weather. The model reacts similarly to a much larger model and its flight is calm without maintaining its full controllability. AS3X brings more driving confidence.

SAFE Select technology ™ for beginners

Thanks to the SAFE Select technology used, even a less experienced pilot can control the model . The SAFE system prevents the incline from being exceeded when cornering and also limits ascents and descents. By simply releasing the control levers of the controller, the model returns to horizontal flight. These features will be appreciated especially by novice pilots who are not yet fully confident in driving models.

As the name SAFE Select suggests, this is an optional feature - it's up to you whether you want to use or disable SAFE technology. The pairing method sets whether the SAFE function is to be switched on or off. It is also possible to turn the SAFE function on or off using the free channel of the transmitter.

Advantages of the SAFE Select funkce function:

• It limits the maximum inclinations of the model and thus prevents the model from moving into the corkscrew.
• It automatically puts the model into horizontal flight when the transmitter control levers are released
• Using the free channel, the SAFE system can be switched on or off during flight.

Integrated LED lighting

The installed LED lighting system offers flying at dusk or at night as well as in daylight. The multi-colored light chains are controlled via a built-in controller that offers 100+ different color combinations, sequences and timings and is powered by a powered LiPol battery. When flying in daylight, you simply turn off the lights with the power switch on the model.

AC motor

The installed AC motor with a 30A regulator with a brake and a two-blade tilting propeller provides the model with high power when climbing and has minimal resistance when the propeller is tilted along the fuselage. The tilting propeller in non-motorized flight does not increase resistance, so the glider can fly in thermals for long minutes. With the flight technique where the engine transports the model to altitude again and continues to fly without the use of the engine, it is possible to achieve a long flight in tens of minutes. LiPol battery 3S 1350mAh to 2200mAh can be used.

AC regulator with telemetry

Night Radian 2.0m is equipped with a controller that can offer a variety of telemetry data related to the real-time power system. This includes engine speed, current, total battery voltage and more via compatible Smart receivers (including AR631 installed in the BNF® Basic version) and a transmitter equipped with Spectrum ™ AirWare ™ (including DX6e and 8e, DX6 G2 / G3 and 8 G2, DX9, NX6, 8 and 10, iX12, iX20 and others), real in flight.

New and better

The popularity of the original Radian model led E-flite designers to modify the Night Radian FT model, which retained good flight characteristics and excellent handling. However, thanks to the lighting, its usability has increased significantly, because now you can also enjoy night flying. In the version of the set, the lighting of the free channel is not ensured.

Quick assembly

No glue is needed during assembly, only a screwdriver. Therefore, the motorized Night Radian glider can be ready to fly in less time than it takes to charge the battery. The two - part sash with a carbon tube is secured with two screws for easy and convenient assembly and disassembly / p>

Lightweight and durable

The elevator has a full profile and integrated LED lighting. The construction made of EPO material is reinforced with carbon elements, it is light and at the same time very durable. The model is easy to repair and offers the best flight experience.

Access to electronics

An AR631 receiver and elevator and rudder servos are installed under the cover at the bottom of the Night Radian's fuselage. Under the cab is a place for a propulsion battery, which is secured with Velcro.

Recommended transmitters Spektrum

We recommend modern SPEKTRUM programmable transmitters for pairing the BNF version model:

• 6-channel transmitter series DX Spektrum DX6e DSMX with telemetry, 250 models in memory .
• 6-channel NX series transmitter Spectrum NX6 DSMX with the latest trends, Smart Technology compatibility, USB port and WiFi connectivity .
• 8-channel NX series transmitter Spectrum NX8 DSMX with the latest trends, Smart Technology compatibility, USB port and WiFi connectivity .

Recommended batteries

We recommend a 3-cell (11.1 V) drive LiPol battery to power the model.

• For economical flying LiPo battery Black Magic LiPol 11.1V 1300mAh 25C EC3 with EC3 connector.
• For a longer period of time Black Magic LiPol 11.1 In 1800mAh 25C EC3 with EC3 connector.
• Smart LiPo batterySpectrum Smart LiPo 11.1V 2200mAh 30C IC3 with Smart technology

Spektrum batteries with Smart technology are currently the most modern and safest way to maintain and charge batteries. You can find the advantages of Spektrum Smart technology here.

Recommended chargers for conventional LiPol and Smart batteries

If you decide to use modern Smart LiPo batteries in RC models of airplanes or helicopters, or to charge your batteries from other manufacturers, then we recommend the following chargers:

• Charger with mains power supply Spektrum S150 with one 50W output.
• Charger with mains power supply Spektrum S1100AC with one output 1x100W .
• Charger with mains power supply Spektrum S2100 with two outputs 2x 100W .

Recommended modern powerful chargers for Smart batteries

• High-performance AC charger Spectrum Smart G2 charger S1400 1x400W AC with one 400W output.
• High-performance AC charger Spectrum Smart G2 charger S2200 2x200W AC with two 2x200W outputs.

There is a reduction for charging IC5 / IC3 Spectrum conversion cable IC5 device - IC3 battery 10cm 10 AWG.

Recommended chargers for conventional LiPo batteries

If you decide to run the model on conventional LiPo batteries , we recommend using universal chargers with a power of at least 50 W.

Dynamite Prophet Sport charger with two 50 W outputs

Accessories for normal operation

For normal operation of flying RC models, you need suitable adhesives, a set of tools and a case for storing LiPol batteries. From our range, we recommend a quality set of 1.5 / 2.0 / 2.5 / 3.0mm Allen screwdrivers and Modelcraft Phillips screwdrivers (set of 6). Modelcraft mini pliers in a case (set) and a Modelcraft cutting knife with an A6 washer will certainly be suitable for assembly.

For quick repair of aircraft models, we recommend a fast-curing 4-minute Epoxy adhesive. From our offer we recommend Speed Epoxy 4 min. 71g

Protective covers for batteries

Protective covers are designed to reduce the risk associated with transporting and charging batteries. LiPo batteries can, while maintaining small dimensions and low weight, provide high discharge currents and have a large capacity. The LiPo battery is prone to mechanical damage and therefore needs to be thoroughly protected.