- -5.21 €
E-flite Valiant 1.3m SAFE Select BNF Basic
Express delivery
Large selection of carriers
Satisfaction guarantee
Package contents
The package contains Valiant 1.3m BNF Basic with installed components: AC motor 480 Outrunner 960Kv, E-flite regulator AC 30A PRO V2 SB, Spectrum servo A381 9g Mini, cable 40cm, Spectrum servo A382 13g MG, cable 24cm, Spectrum receiver AR631 6CH AS3X / SAFE. Instructions in Czech, manual EN, DE, FR, IT.
Characteristics
Sports RC remote control model Valiant 1.3m SAFE Select BNF Basic is a multi-purpose training and sports model for relaxed flying. Modern concept, AC motor, AR631 receiver with optional SAFE function, aluminum chassis, possibility of float mounting.
The Valiant model consists of ready-made assembled and painted parts of the model. The tail surfaces are very easily attached to the fuselage with screws and attached to the drawbars.
To reduce takeoff and landing speed, the model has flaps installed. The wing has separate aileron and flap servos.
The model is in the BNF version, so it is necessary to add a Spektrum 6+ channel transmitter, LiPol battery 2200mAh 11.1V 3S 30C with the appropriate charger. Adjust your transmitter according to the instructions, pair the receiver with the transmitter, charge the battery and you can start
Valiant is a sports model that you can fly at the airport thanks to a solid aluminum chassis with a controlled spur. Or you can buy floats and try flying like a seaplane. Thanks to the flaps, which reduce the flight speed, it is possible to safely take off and land on the water surface. The model is designed so that the installation of the optional set of floats takes only a few minutes, all the necessary accessories are included.
The model's electronics are equipped with AS3X electronic stabilization, which offers the highest level of accuracy and stabilization in flight. It is a completely new flight experience, thanks to the latest technology, which can guide the model like a cord. Based on information from the gyroscope, the microprocessor constantly maintains the position of the aircraft using the ailerons, rudder and elevator in the same orientation until you instruct the transmitter to change the position of the model.
If you are a new pilot or want to have a greater level of safety and at the same time get acquainted with the aircraft, you can turn on the optional SAFE Select technology, which is built into the receiver. No programming required. Simply change the settings while pairing the model, following the instructions in the manual. The SAFE function ensures flight envelope restrictions and extreme flight limits.
- SAFE® option for beginners
- Wide flight envelope with sporty performance
- Functional flaps installed
- Powerful AC motor 80 and regulator
- Spektrum AR631 receiver with SAFE technology
- 6 micro servos installed
- Durable aluminum chassis with wheel covers
- Optional set of floats available
- Made of durable Z-Foam material
We recommend buying
You will need a Spektrum transmitter, a propellant LiPol battery and a charger.
Recommended Spektrum transmitters
We recommend modern SPEKTRUM programmable transmitters for pairing the BNF version model:
- DX Spectrum DX6e DSMX 6-channel telemetry transmitter, 250 models in memory .
- 6-channel transmitter of the NX Spectrum NX6 DSMX series with the latest trends, Smart Technology compatibility, USB port and WiFi connection options .
- 8-channel NX series transmitter Spectrum NX8 DSMX with the latest trends, Smart Technology compatibility, USB port and WiFi connectivity .
Recommended batteries
We recommend a 3-cell (11.1 V) LiPol drive battery to power the model.
- For economical flying LiPo battery Black Magic LiPol 11.1V 2200mAh 25C with EC3 connector.
- Smart LiPo battery Spectrum Smart LiPo 11.1V 2200mAh 30C IC3 with Smart technology
- For longer flight time LiPo battery Spectrum Smart LiPo 11.1V 3200mAh 30C IC3 with Smart technology
Spektrum batteries with Smart technology are currently the most modern and safest way to maintain and charge batteries. You can find the advantages of Spektrum Smart technology here.
Recommended chargers for conventional and Smart batteries
If you decide to use modern in RC model airplanes Smart LiPo batteries , then we recommend the following chargers:
- Charger with mains power supply Spektrum S150 with one 50W output.
- Charger with mains power supply Spektrum S1100AC with one output 1x100W .
- Charger with mains power supply Spektrum S2100 with two outputs 2x 100W .
Recommended modern chargers for Smart batteries
- High performance AC charger Spektrum Smart G2 charger S1400 1x400W AC with one output 400W .
- High performance AC charger Spektrum Smart G2 charger S2200 2x200W AC with two outputs 2x200W .
There is a reduction for charging IC5 / IC3 Spectrum conversion cable IC5 device - IC3 battery 10cm 10 AWG.
Recommended chargers for conventional LiPo batteries
If you decide to run the model on conventional LiPo batteries , we recommend using universal chargers with a power of at least 50 W.
Dynamite Prophet Sport charger with two 50 W outputs
Accessories for normal operation
For normal operation of flying RC models, you need suitable adhesives, a set of tools and a case for storing LiPol batteries. From our range we recommend a quality set of Allen screwdrivers 1.5 / 2.0 / 2.5 / 3.0mm and Modelcraft Phillips screwdrivers (set of 6). The Modelcraft mini pliers in a case (set) and a Modelcraft cutting knife with an A6 washer will certainly be suitable for assembly.
For quick repair of aircraft models, we recommend the fast-curing 4-minute Epoxy adhesive. From our offer we recommend Speed Epoxy 4 min. 71g
Protective covers for batteries
Protective covers are designed to reduce the risk associated with transporting and charging batteries. LiPo batteries can, while maintaining small dimensions and low weight, provide high discharge currents and have a large capacity. The LiPo battery is prone to mechanical damage and therefore needs to be thoroughly protected.